Instrukcja obsługi Maxwell MX-25109
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Maxwell MX-25109 (12 stron) w kategorii multimetr. Ta instrukcja była pomocna dla 9 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek
Strona 1/12
U Mser anUal
Használati Utasítás
ManUal de Utilizare
Užívateľská prírUčka
DIGITAL MULTIMETER
DIGITÁLIS MULTIMÉTER
MULTIMETRU DIGITAL
DIGITÁLNY MULTIMETER
Product code / Termékkód / Cod produs / Kód produkta:
25109
EN
User Manual
G eneral cHaracteristics
This 3½ digit multimeter is perfect for
measuring DC and AC voltage, DC current,
resistance and diode. It also has a continuity
function and can be used as a logical tester. It is
ideal for work and home use as well.
specification
1. Displaying: 22 mm digit height LCD display
2. Max. Indication: 1999 (31/2) auto polarity
indication
3. Sampling rate: approx. 3 times/ sec
4. Over Range Indication: MSD displays "1"
5. Low Battery Indication: " " symbol displays.
6. Operation Environment: (0~40)°C, relative
humidity <80%
7. Power: 9V battery (NEDA1604/6F22 or
equivalent)
8. Measurement: 145×85×30mm
(Length×Width×Height)
9. Weight: Approx. 170g (including a 9V battery)
t He front panel
1. Display
3½ digits, 7 segments, large LCD (27 × 53 mm)
2. Function and range switch
This switch selects the functions and the desired
range. It also turns the device on. To prolong
battery life set it to OFF when you are not using
the device.
3. “10A” banana (wire) connector
Connect the red (positive) measuring wire into
this connector to measure 10A current.
4. “VΩmA” banana connector
Connect the red measuring wire into this
connector to measure every kind of voltage,
resistance and current (except for 10A)
5. “COM” banana connector
Connect the black (negative) measuring wire
here.
t ecHnical data
DC voltage
Range Resolution Accuracy
200mV 100μV
±0.5% +4D
2V 1mV
20V 10mV
200V 100mV
600V 1V ±1.0% +5D
Overload protection: 600V DC
Input impedance: 1MΩ
AC voltage
Range Resolution Accuracy
200V 100mV ±1.2% +10D
600V 1V
Frequency range: 40Hz ~ 200Hz
Overload protection: 600V RMS
Input impedance: 1MΩ
1.
2.
3. 4.
5.
R
MP 25109
20MΩ
200mV
2V
20V
200V
200V
200µA
20µA
600V
600V
200kΩ
200Ω
10A
200mA
20mA
10sec MAX
FUSED
10A
10A
A
v
v~
COM
mAVΩ
MAX 600V
FUSED
CAT III
200mA
2mA
20kΩ
2kΩ
OFF
Ω
+
-
User Manual
EN
Continuity test with audio signal
Range Description
A built-in beeper
signals if the
resistance is below
70±20Ω
Overload protection: 15 seconds maximum
250V DC/AC peak value
DC current
Range Resolution Accuracy
20uA 0.01μA
±1.5% +3D
200uA 0.1μA
2mA 1μA
20mA 10μA
200mA 100μA
10A 10mA ±2% +5D
Overload protection: 200mA/250V fuse and
10A/250V fuse
Max. input current: 10A (max. 6 sec.)
Resistance
Range Resolution Accuracy
200Ω 0.1Ω ±0.8% +5D
2kΩ 1Ω
±0.8% +3D20KΩ 10Ω
200KΩ 100Ω
20MΩ 10kΩ ±1.0% +15D
Max. open circuit voltage: 3.0V
Overload protection: 15 seconds maximum
250V RMS
operation
WARNING
To avoid electric shock and damage to the
device do not measure voltage exceeding 300V!
Always verify the intactness and insulation of
the measuring wires, connectors and other units
before measuring!
DC and AC voltage measuring
connector and the black one to the “COM”
connector.
voltage position. If the voltage is unknown,
set the switch to the highest available range,
connect the wires to the device and the circuit
and reduce the range until the value shown is
correct.
DC current measuring
connector and the black one to the “COM”
connector. (For measuring current between
200mA and 10A connect the red wire into the
“10A” connector).
position
serially.
use only. The measuring wire should only be
connected to the circuit for the maximum of 6
seconds and allow a few seconds in between
measurements.
Resistance measuring
connector and the black one to the “COM”
connector.
position.
Diode measuring
connector and the black one to the “COM”
connector.
” position.
of the measured diode and the black one to the
cathode.
the screen in mV-s. If the diode is closing, the
screen shows “1”.
Specyfikacje produktu
| Marka: | Maxwell |
| Kategoria: | multimetr |
| Model: | MX-25109 |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z Maxwell MX-25109, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje multimetr Maxwell
6 Października 2024
16 Września 2024
31 Sierpnia 2024
30 Sierpnia 2024
24 Sierpnia 2024
23 Sierpnia 2024
20 Sierpnia 2024
15 Sierpnia 2024
14 Sierpnia 2024
13 Sierpnia 2024
Instrukcje multimetr
- multimetr PeakTech
- multimetr Joy-It
- multimetr Voltcraft
- multimetr Milwaukee
- multimetr Yato
- multimetr Parkside
- multimetr GW Instek
- multimetr Stanley
- multimetr Silverline
- multimetr Testo
- multimetr Aim TTi
- multimetr TFA
- multimetr Chauvin Arnoux
- multimetr Gembird
- multimetr Uni-T
- multimetr Owon
- multimetr Biltema
- multimetr Digitus
- multimetr Vimar
- multimetr Schneider
- multimetr Emos
- multimetr Sonel
- multimetr BaseTech
- multimetr Perel
- multimetr Trotec
- multimetr Velleman
- multimetr Pyle
- multimetr Gossen Metrawatt
- multimetr Fluke
- multimetr Megger
- multimetr Weidmüller
- multimetr BENNING
- multimetr Brandson
- multimetr Metrix
- multimetr Rigol
- multimetr Abus
- multimetr Elro
- multimetr Ferm
- multimetr Hager
- multimetr Extech
- multimetr Testboy
- multimetr Kyoritsu
- multimetr Klein Tools
- multimetr Powerfix
- multimetr Workzone
- multimetr Alecto
- multimetr JUNG
- multimetr Monacor
- multimetr Etekcity
- multimetr Wiha
- multimetr HT Instruments
- multimetr Qian
- multimetr Beha-Amprobe
- multimetr Clas Ohlson
- multimetr Laserliner
- multimetr Ideal
- multimetr Profile
- multimetr Aldi
- multimetr Appa
- multimetr Amprobe
- multimetr Amiko
- multimetr Brennenstuhl
- multimetr Tacklife
- multimetr Somogyi
- multimetr Steren
- multimetr Flir
- multimetr Topcraft
- multimetr Altai
- multimetr Plieger
- multimetr Projecta
- multimetr Cablexpert
- multimetr Greenlee
- multimetr Högert
- multimetr Wago
- multimetr REV
- multimetr Bruder Mannesmann
- multimetr Keithley
- multimetr Bearware
- multimetr Metrel
- multimetr Multimetrix
- multimetr Digi-tool
- multimetr Skandia
- multimetr Elma
- multimetr Testec
- multimetr Hubinont
- multimetr Kewtech
- multimetr Strex
- multimetr Mastech
- multimetr MBS
- multimetr MGL Avionics
- multimetr PCE Instruments
- multimetr Micronta
- multimetr CEM
- multimetr Horex
- multimetr Cosinus
- multimetr Kurth Electronic
- multimetr IWH
- multimetr Weltron
- multimetr Sanwa
- multimetr Rohde & Schwarz
- multimetr EEVBlog
- multimetr Kingcraft
- multimetr Caltek
- multimetr Elworks
- multimetr Noyafa
Najnowsze instrukcje dla multimetr
14 Marca 2025
14 Marca 2025
14 Stycznia 2025
12 Stycznia 2025
10 Stycznia 2025
10 Stycznia 2025
10 Stycznia 2025
10 Stycznia 2025
10 Stycznia 2025
8 Stycznia 2025