Instrukcja obsługi Maxwell MX-25108
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Maxwell MX-25108 (16 stron) w kategorii multimetr. Ta instrukcja była pomocna dla 5 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek
Strona 1/16
U Mser anUal
anwendUngsinforation
Használati Utasítás
ManUal de Utilizare
Užívateľská prírUčka
digital multimeter
digital-multimeter
digitális multiméter
multimetru digital
digitálny multimeter
Product code / Produktcode / Termékkód / Cod produs / Kód produkta:
25108
DT700D
i
EN User Manual
g eneral cHaracteristics
This 3½ digit multimeter is perfect for
measuring DC and AC voltage, DC current,
resistance and diode. It also has a continuity
function and can be used as a logical tester. It is
ideal for work and home use as well.
t He front panel
1. Display
3½ digits, 7 segments, large LCD (27 × 60 mm)
2. Function and range switch
This switch selects the functions and the desired
range. It also turns the device on. To prolong
battery life set it to OFF when you are not using
the device.
3. “5A” banana (wire) connector
Connect the red (positive) measuring wire into
this connector to measure 10A current.
4. “VmA” banana connector
Connect the red measuring wire into this
connector to measure every kind of voltage,
resistance and current (except for 5A)
5. “COM” banana connector
Connect the black (negative) measuring wire
here.
t ecHnical data
DC voltage
Range Resolution Accuracy
200mV 100uV ±0.5% +3D
2000mV 1mV
±1.0% +5D20V 10mV
200V 100mV
300V 1V ±1.2% +5D
Overload protection
220V RMS AC at
200mV range, és
300V DC or 300V RMS
on every range
AC voltage
Range Resolution Accuracy
200V 100mV ±1.2% +10D
300V 1V
Reaction
Average, calibrated
on the RMS of the
sine wave
Frequency range 45Hz ~ 450Hz
Overload protection 300V DC or 300V RMS
on every range
Continuity test with audio signal
Range Description
A built-in beeper
signals if the
resistance is below
30±20Ω
Overload protection 15 seconds maximum
220V RMS
300300
5
300
300V~max
-
1
2
3
4
5
User Manual EN
DC current
Range Resolution Accuracy
2000μA 1μA ±1.8% +2D
20mA 10μA
200mA 100μA ±2% +2D
5A 10mA ±2% +10D
Overload protection 500mA 500V fuse (5A
500V)
Measuring voltage
fallback 200mV
Resistance
Range Resolution Accuracy
200Ω 100mΩ ±1.0% +10D
2000Ω 1Ω ±1.0% +2D
20KΩ 10Ω ±1.0% +2D
200KΩ 100Ω ±1.0% 2D
2000KΩ 1KΩ ±1.0% +2D
Max. open circuit
voltage 3.0V
Overload protection 15 seconds maximum
220V RMS
operation
WARNING
To avoid electric shock and damage to the
device do not measure voltage exceeding 300V!
Always verify the intactness and insulation of
the measuring wires, connectors and other units
before measuring!
DC and AC voltage measuring
connector and the black one to the “COM”
connector.
desired voltage position. If the voltage is
unknown, set the switch to the highest
available range, connect the wires to the
device and the circuit and reduce the range
until the value shown is correct.
DC current measuring
connector and the black one to the “COM”
connector. (For measuring current between
200mA and 5A connect the red wire into the
“5A” connector).
position
serially.
use only. The measuring wire should only be
connected to the circuit for the maximum
of 15 seconds and allow a few seconds in
between measurements.
Resistance measuring
connector and the black one to the “COM”
connector.
position.
Diode measuring
connector and the black one to the “COM”
connector.
” position.
of the measured diode and the black one to
the cathode.
Specyfikacje produktu
| Marka: | Maxwell |
| Kategoria: | multimetr |
| Model: | MX-25108 |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z Maxwell MX-25108, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje multimetr Maxwell
6 Października 2024
16 Września 2024
31 Sierpnia 2024
30 Sierpnia 2024
24 Sierpnia 2024
23 Sierpnia 2024
20 Sierpnia 2024
15 Sierpnia 2024
14 Sierpnia 2024
13 Sierpnia 2024
Instrukcje multimetr
- multimetr PeakTech
- multimetr Joy-It
- multimetr Voltcraft
- multimetr Milwaukee
- multimetr Yato
- multimetr Parkside
- multimetr GW Instek
- multimetr Stanley
- multimetr Silverline
- multimetr Testo
- multimetr Aim TTi
- multimetr TFA
- multimetr Chauvin Arnoux
- multimetr Gembird
- multimetr Uni-T
- multimetr Owon
- multimetr Biltema
- multimetr Digitus
- multimetr Vimar
- multimetr Schneider
- multimetr Emos
- multimetr Sonel
- multimetr BaseTech
- multimetr Perel
- multimetr Trotec
- multimetr Velleman
- multimetr Pyle
- multimetr Gossen Metrawatt
- multimetr Fluke
- multimetr Megger
- multimetr Weidmüller
- multimetr BENNING
- multimetr Brandson
- multimetr Metrix
- multimetr Rigol
- multimetr Abus
- multimetr Elro
- multimetr Ferm
- multimetr Hager
- multimetr Extech
- multimetr Testboy
- multimetr Kyoritsu
- multimetr Klein Tools
- multimetr Powerfix
- multimetr Workzone
- multimetr Alecto
- multimetr JUNG
- multimetr Monacor
- multimetr Etekcity
- multimetr Wiha
- multimetr HT Instruments
- multimetr Qian
- multimetr Beha-Amprobe
- multimetr Clas Ohlson
- multimetr Laserliner
- multimetr Ideal
- multimetr Profile
- multimetr Aldi
- multimetr Appa
- multimetr Amprobe
- multimetr Amiko
- multimetr Brennenstuhl
- multimetr Tacklife
- multimetr Somogyi
- multimetr Steren
- multimetr Flir
- multimetr Topcraft
- multimetr Altai
- multimetr Plieger
- multimetr Projecta
- multimetr Cablexpert
- multimetr Greenlee
- multimetr Högert
- multimetr Wago
- multimetr REV
- multimetr Bruder Mannesmann
- multimetr Keithley
- multimetr Bearware
- multimetr Metrel
- multimetr Multimetrix
- multimetr Digi-tool
- multimetr Skandia
- multimetr Elma
- multimetr Testec
- multimetr Hubinont
- multimetr Kewtech
- multimetr Strex
- multimetr Mastech
- multimetr MBS
- multimetr MGL Avionics
- multimetr PCE Instruments
- multimetr Micronta
- multimetr CEM
- multimetr Horex
- multimetr Cosinus
- multimetr Kurth Electronic
- multimetr IWH
- multimetr Weltron
- multimetr Sanwa
- multimetr Rohde & Schwarz
- multimetr EEVBlog
- multimetr Kingcraft
- multimetr Caltek
- multimetr Elworks
- multimetr Noyafa
Najnowsze instrukcje dla multimetr
14 Marca 2025
14 Marca 2025
14 Stycznia 2025
12 Stycznia 2025
10 Stycznia 2025
10 Stycznia 2025
10 Stycznia 2025
10 Stycznia 2025
10 Stycznia 2025
8 Stycznia 2025