Instrukcja obsługi Makita EBH252U

Makita maszyna do cięcia EBH252U

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Makita EBH252U (28 stron) w kategorii maszyna do cięcia. Ta instrukcja była pomocna dla 5 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/28
EBH252U
EBH253U
EBH252L
EBH253L
Petrol Brushcutter
EBH252U
EBH253U
EBH252L
EBH253L
ORIGINAL INSTRUCTION MANUAL
Important:
Read this instruction manual carefully before putting the Petrol Brushcutter into operation and strictly observe
the safety regulations!
Preserve instruction manual carefully!
EBH252L
EBH253L
2
Thank you very much for purchasing the MAKITA Petrol Brushcutter. We are
pleased to recommend to you the MAKITA Petrol Brushcutter which is the
result of a long development programme and many years of knowledge and
experience.
Please read this booklet which refers in detail to the various points that will
demonstrate its outstanding performance. This will assist you to obtain the best
possible result from your MAKITA Petrol Brushcutter.
Table of Contents Page
Symbols .........................................................................2
Safety instructions .........................................................3
Technical data................................................................7
Designation of parts.......................................................9
Mounting of handle ......................................................10
Mounting of protector................................................... 11
Mounting of cutter blade or nylon cutting head............12
Before start of operation ..............................................13
Correct handling of machine........................................15
Points in operation and how to stop ............................15
Resharpening the cutting tool ......................................17
Servicing instructions...................................................19
Storage ........................................................................22
Take Particular care and attention!
Read instruction manual and follow
the warnings and safety precautions!
Forbidden!
No smoking!
No open ame!
Protective gloves must be worn!
Keep the area of operation clear of all
persons and pets!
Wear protective helmet, eye and ear
protection!
Engine-manual start
Top permissible tool speed
Emergency stop
ON/START
OFF/STOP
Flying object hazard!
Keep distance!
Kickback!
Fuel (Gasoline)
First Aid
You will note the following symbols when reading the instructions manual.
Wear sturdy boots with nonslip soles.
Steeltoed safety boots are recommended!
English
(Original instructions)
3
15 Meters
Diagrammatic gure
General Instructions
Read this instruction manual to become familiar with handling of the –
equipment. Users insufciently informed will risk danger to themselves as
well as others due to improper handling.
It is recommended only to lend the equipment to people who have proven to –
be experienced.
Always hand over the instruction manual.
First users should ask the dealer for basic instructions to familiarize oneself –
with the handling of brushcutters.
Children and young persons aged under 18 years must not be allowed to –
operate this equipment. Persons over the age of 16 years may however
use the device for the purpose of being trained while under supervision of a
qualied trainer.
Use with the utmost care and attention. –
Operate only if you are in good physical condition. Perform all work calmly –
and carefully. The user has to accept liability for others.
Never use this equipment after consumption of alcohol or drugs, or if feeling –
tired or ill.
National regulation can restrict the use of the machine. –
Intended use of the machine
This equipment is only intended for cutting grass, weeds, bushes, –
undergrowth. It should not be used for any other purpose such as edging or
hedge cutting as this may cause injury.
Personal protective equipment
The clothing worn should be functional and appropriate, i.e. it should be tight- –
tting but not cause hindrance. Do not wear either jewelry or clothing which
could become entangled with bushes or shrubs.
In order to avoid either head-, eye-, hand-or foot injuries as well as to protect –
your hearing the following protective equipment and protective clothing must
be used during operation.
Always wear a helmet where there is a risk of falling objects. The protective –
helmet (1) is to be checked at regular intervals for damage and is to be
replaced at the latest after 5 years. Use only approved protective helmets.
The visor (2) of the helmet (or alternatively goggles) protects the face from –
ying debris and stones. During operation always wear goggles, or a visor to
prevent eye injuries.
Wear adequate noise protection equipment to avoid hearing impairment (ear –
muffs (3), ear plugs etc.).
The work overalls (4) protect against ying stones and debris. –
We strongly recommend that the user wears work overalls.
Gloves (5) are part of the prescribed equipment and must always be worn –
during operation.
When using the equipment, always wear sturdy shoes (6) with a non-slip –
sole. This protects against injuries and ensures a good footing.
Starting up the brushcutter
Please make sure that there are no children or other people within a working –
range of 15 meters (50 ft), also pay attention to any animals in the working
vicinity.
Before use always check the equipment is safe for operation: –
Check the security of the cutting tool, the throttle lever for easy action and
check for proper functioning of the throttle lever lock.
Rotation of the cutting tool during idling speed is not allowed. Check with your –
dealer for adjustment if in doubt. Check for clean and dry handles and test
the function of the start/stop switch.

Specyfikacje produktu

Marka: Makita
Kategoria: maszyna do cięcia
Model: EBH252U

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Makita EBH252U, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje maszyna do cięcia Makita

Makita

Makita WST05 Instrukcja

20 Września 2024
Makita

Makita UR101CZ Instrukcja

11 Września 2024
Makita

Makita CC301DZ Instrukcja

5 Września 2024
Makita

Makita EBH252U Instrukcja

4 Września 2024
Makita

Makita DUR368APT2 Instrukcja

3 Września 2024
Makita

Makita CC300DZ Instrukcja

2 Września 2024
Makita

Makita DSC102ZJ Instrukcja

1 Września 2024
Makita

Makita DSC251ZK Instrukcja

31 Sierpnia 2024
Makita

Makita DCO180Z Instrukcja

30 Sierpnia 2024
Makita

Makita JN1601 Instrukcja

27 Sierpnia 2024

Instrukcje maszyna do cięcia

Najnowsze instrukcje dla maszyna do cięcia

Genius

Genius Nicer Dicer Quick Instrukcja

11 Stycznia 2025
Eldom

Eldom Sliss KR350 Instrukcja

11 Stycznia 2025
RGV

RGV Desy AF 220 AM Instrukcja

10 Stycznia 2025
RGV

RGV Desy AF 275 F Instrukcja

10 Stycznia 2025
Royal Catering

Royal Catering RCKS-3 Instrukcja

10 Stycznia 2025
Royal Catering

Royal Catering RCKS-2 Instrukcja

10 Stycznia 2025
Ovela

Ovela OVSAFSLCERA Instrukcja

5 Stycznia 2025
Royal Catering

Royal Catering RCAM-250 Instrukcja

3 Stycznia 2025
Royal Catering

Royal Catering RCES-215/12 Instrukcja

31 Grudnia 2025
CaterChef

CaterChef 537150 Instrukcja

31 Grudnia 2025