Instrukcja obsługi Luxul XAP-810
Luxul
Access point
XAP-810
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Luxul XAP-810 (2 stron) w kategorii Access point. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek
Strona 1/2
Access Point Setup Gu
Setting up your AP:
Place the AP in the center
of the desired coverage area
NOTE: If installing this AP w
wireless controller, refer to the Wireless Controller Setup Guide
Connect a PoE+ Ethernet cable to the AP’s PoE
port (for power, use the included PoE injector
or a compatible PoE+ switch)
AP power
source
router or
switch
IN
OUT
POE
INJECTOR
2.
1.
Connecting Via an Ethernet Device
Use an Ethernet cable to connect your computer to the LAN port
of the AP. Ethernet is the preferred method of connection
Connecting Via a Wireless Device
Connect a wireless client device to the AP’s default wireless
network: Luxul_XAPXXXX* and use the passphrase luxulwifi.
*XXXX corresponds to the model number of the AP
NOTE: If your computer or device isn’t set to obtain an IP
address automatically, you’ll need to set a temporary static
IP address on that device. Set the IP address of your computer
to an address in the 192.168.0.X range, then set the gateway/router
address to 192.168.0.10
Visit http://luxul.com/ip-addressing to learn more about changing
your computer’s IP address and getting connected
3a.
3b.
Open a web browser and go to 192.168.0.10
Login with the default username and password
U: admin
P: admin
NOTE: You will be required to change
the default administrator password
4.
View Luxul’s privacy policy at:
https://www.luxul.com/about-us/legal/privacy-policy.aspx
Copyright and Trademark Notices
No part of this document may be modified or adapted in any way, for any purposes without permission in
writing from Luxul. The material in this document is subject to change without notice. Luxul reserves the
right to make changes to any product to improve reliability, function, or design. No license is granted, either
expressly or by implication or otherwise under any Luxul intellectual property rights. An implied license
only exists for equipment, circuits and subsystems contained in this or any Luxul product.
© Copyright 2020 Legrand AV Inc. All rights reserved. The name Luxul, the Luxul logo, the Luxul logo
mark and Simply Connected are all trademarks and or registered trademarks of Legrand AV Inc.
All other trademarks and registered trademarks are property of their respective holders.
Technical Support
P: 801-822-5450
E: support@luxul.com
For support chat go to:
luxul.com
Sales
P: 801-822-5450
E: sales@luxul.com
I need to restore factory default settings?
To restore factory default settings to your AP, press and
hold the button labeled ‘RESET’ until the green system LED
starts flashing (5 seconds)
I need to restart my AP?
To restart your AP, press and quickly release the button
labeled ‘RESET’
I want to perform advanced configuration?
1. Open a web browser and go to 192.168.0.10 or the IP
address you specified during the setup process
2. Enter the login credentials you created during the
setup process
What if... What do the LEDs on my AP indicate?
Indicator DescriptionState
Green
System
LED
On AP is properly connected to power supply
Blinking AP is booting
O AP is not connected to power or the LED is
turned o in the web interface
Blue
LEDs
The blue LEDs indicate the status of the wireless broadcast,
one for 2.4GHz and the other for 5GHz
On AP is broadcasting a wireless signal
Blinking Indicates wireless activity
O AP is not broadcasting a signal, or the LED
is turned o in the web interface
Specyfikacje produktu
Marka: | Luxul |
Kategoria: | Access point |
Model: | XAP-810 |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z Luxul XAP-810, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje Access point Luxul
8 Października 2024
8 Października 2024
8 Października 2024
8 Października 2024
8 Października 2024
8 Października 2024
8 Października 2024
8 Października 2024
8 Października 2024
8 Października 2024
Instrukcje Access point
- Access point Tenda
- Access point TP-Link
- Access point Bosch
- Access point StarTech.com
- Access point TRENDnet
- Access point D-Link
- Access point Mikrotik
- Access point Cisco
- Access point Lindy
- Access point ZyXEL
- Access point Dell
- Access point Linksys
- Access point Dahua Technology
- Access point Renkforce
- Access point Netgear
- Access point Homematic IP
- Access point Totolink
- Access point Black Box
- Access point Lancom
- Access point Intellinet
- Access point Devolo
- Access point Kingston
- Access point Mercusys
- Access point Draytek
- Access point Edimax
- Access point AirLive
- Access point EnGenius
- Access point Planet
- Access point LevelOne
- Access point Ubiquiti Networks
- Access point Cudy
- Access point Netis
- Access point Allnet
- Access point Grandstream
- Access point Allied Telesis
- Access point Sitecom
- Access point Fortinet
- Access point Steren
- Access point Buffalo
- Access point Aruba
- Access point Hawking Technologies
- Access point INCA
- Access point Advantech
- Access point SMC
- Access point Aerohive
- Access point NUVO
- Access point IP-COM
- Access point Cambium Networks
- Access point 3Com
- Access point Extreme Networks
- Access point Atlantis Land
- Access point Mojo
- Access point FlyingVoice
Najnowsze instrukcje dla Access point
9 Października 2024
9 Października 2024
9 Października 2024
9 Października 2024
9 Października 2024
9 Października 2024
9 Października 2024
9 Października 2024
9 Października 2024
9 Października 2024