Instrukcja obsługi LevelOne WAP-1001

LevelOne Punkt dostępu WAP-1001

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla LevelOne WAP-1001 (49 stron) w kategorii Punkt dostępu. Ta instrukcja była pomocna dla 10 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/49
LevelOne
WAP-1001
11g Outdoor Wireless AP/Bridge
User Manual
Ver.1.02-0917
1
FCC Notice
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference in a
residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if
not installed
and used in accordance with the instructions, may cause harmful interference
to radio communications. Ho tee that interference will wever, there is no guaran
not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
—Consult the dealer or an experienced radio/wireless technician for help.
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
The antenna(s) used for this transmitter must not be co-located or operating in
conjunction with any other antenna or transmitter.
The manufacture is not responsible for any radio or wireless interference
caused by unauthorized modifications to this equipment. Such modifications
could void the user’s authority to operate the equipment.
2
3
The Wireless Technology
Standard
The Wireless Access Point utilizes the 802.11b and the 802.11g standards. The
IEEE 802.11g standard is an extension of the 802.11b standard. It increases
the data rate up to 54 Mbps (108Mbps in Super G mode) within the 2.4GHz
band, utilizing OFDM technology. This means that in most environments, within
the specified range of this device, you will be able to transfer large files quickly
or even watch a movie in MPEG format you’re your network without noticeable
delays. This technology works by transmitting high-speed digital data over a
radio wave utilizing OFDM (Orthogonal Frequency Division Multiplexing)
technology. OFDM works by splitting the radio signal into multiple smaller
sub-signals that are then transmitted simultaneously at different frequencies to
the receiver. OFDM reduces the amount of cross talk (interference) in signal
transmissions. The AP will automatically sense the best possible connection
speed to ensure the greatest speed and range possible. 802.11g offers the
most advanced network security features available today, including: WEP,WPA,
TKIP, AES and Pre-Shared Key mode.
Planning Your Wireless Network
Network Topology
A wireless network is a group of computers, each equipped with one wireless
adapter. Computers in a wireless network must be configured to share the
same radio channel. Several PCs equipped with wireless cards or adapters can
communicate with one another to form an ad-hoc network. The wireless
adapters also provide users access to a wired network when using an access
point or wireless router. An integrated wireless and wired network is called an
infrastructure network. Each wireless PC in an infrastructure network can talk
to any computer in a wired network infrastructure via the access point or
wireless router. An infrastructure configuration extends the accessibility of a
wireless PC to a wired network, and may double the effective wireless
transmission range for two wireless adapter PCs. Since an access point is able
to forward data within a network, the effective transmission range in an
infrastructure network may be doubled.

Specyfikacje produktu

Marka: LevelOne
Kategoria: Punkt dostępu
Model: WAP-1001

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z LevelOne WAP-1001, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje Punkt dostępu LevelOne

LevelOne

LevelOne WAP-8231 Instrukcja

8 Października 2024
LevelOne

LevelOne WAP-1001 Instrukcja

3 Września 2024
LevelOne

LevelOne WAP-6112 Instrukcja

3 Września 2024
LevelOne

LevelOne WAP-6017 Instrukcja

2 Września 2024
LevelOne

LevelOne WAP-6012 Instrukcja

27 Sierpnia 2024
LevelOne

LevelOne WAB-6010 Instrukcja

27 Sierpnia 2024
LevelOne

LevelOne WAP-6111 Instrukcja

25 Sierpnia 2024
LevelOne

LevelOne WAP-8101 Instrukcja

3 Lipca 2024
LevelOne

LevelOne WAP-8122 Instrukcja

3 Lipca 2024

Instrukcje Punkt dostępu

Najnowsze instrukcje dla Punkt dostępu

Cisco

Cisco MR12 Instrukcja

14 Października 2024
Draytek

Draytek VigorAP 920R Instrukcja

13 Października 2024
Netgear

Netgear WNDAP360 Instrukcja

12 Października 2024
TP-Link

TP-Link Festa F65-Wall Instrukcja

9 Października 2024
D-Link

D-Link DWL-1000AP+ Instrukcja

9 Października 2024
D-Link

D-Link DWL-700AP Instrukcja

9 Października 2024
Cambium Networks

Cambium Networks cnPilot e505 Instrukcja

9 Października 2024
Cambium Networks

Cambium Networks cnPilot e425H Instrukcja

9 Października 2024
Cambium Networks

Cambium Networks cnPilot e600 Instrukcja

9 Października 2024
Cambium Networks

Cambium Networks cnPilot e510 Instrukcja

9 Października 2024