Instrukcja obsługi Kyoritsu KEW 2413R

Kyoritsu multimetr KEW 2413R

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Kyoritsu KEW 2413R (7 stron) w kategorii multimetr. Ta instrukcja była pomocna dla 5 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/7

KEW SNAP

Series

KEW 2413R

DIGITAL CLAMP METER

KYORITSU ELECTRICAL INSTRUMENTS

WORKS，LTD.

INSTRUCTION MANUAL

—

　１．Safety Warnings

This instrument has been designed and tested according to I

Publication 61010: Safety Requirements for Electronic M

Apparatus. This instruction manual contains warnings

which must be observed by the user to ensure safe operation of the

instrument and retain it in safe condition. Therefore, roperating instructions before starting using the instrum

● The symbol

indicated on the instrument means that the user must

refer to related parts in the manual for safe operation of th

instrument. Be

symbol in this manual.

DANGER

is reserved for conditions and actions that are likely to cause serious or fatal injury

WARNING

iscause serious or fatal injury

CAUTION

iscause bodily injury or instrument damage.

WARNING

● Read through and understand instructions contained i

manual before starting using the instrument.

● Save and keep the manual handy to enable quick refer

whenever necessary.

● The instrument is to be used only in its intended ap● Understand and follow all the safety instructions co

manual.

　 Failure to follow the instructions may cause injury,

damage and/or damage to equipment under test. Kyorno means liable for any damage resulting from the inscontradiction to this cautionary note.

—

Following symbols are used on the instrument and in the instruction

manual. Attention should be paid to each symbol to ensure you

Refer to the instructions in the manual.

This symbol is marked where the user must refer to the instruc

manual so as not to cause personal injury or instrument damag



Indicates an instrument with double or reinforced insulation. Indicates that this instrument can clamp on bare conductors whmeasuring a voltage corresponding to the applicable Measuremcategory, which is marked next to this symbol.This instrument satisfies the marking requirement defined in thWEEE Directive (2002/96/EC). This symbol indicates separate collection for electrical and electronic equipment.

DANGER● Never make measurement on a circuit above 300V AC (CAT●

Do not attempt to flammable gasseinstrument may c

● Transformer jaw tips are designed not to short the circuit un