Instrukcja obsługi Konig SEC-APR20

Konig detektor ruchu SEC-APR20

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Konig SEC-APR20 (52 stron) w kategorii detektor ruchu. Ta instrukcja była pomocna dla 4 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/52
2013-10-24
SEC-APR20
MANUAL (p. 2)
Motion alarm with remote keyfob
ANLEITUNG (S. 5)
Bewegungsmelder mit
Schlüsselanhänger-Fernsteuerung
MODE D’EMPLOI (p. 8)
Détecteur de mouvement muni de
télécommande porte
GEBRUIKSAANWIJZING (p. 11)
Bewegingsalarm met
sleutelhangerafstandsbediening
MANUALE (p. 14)
Allarme di movimento con portachiavi
telecomando
MANUAL DE USO (p. 17)
Alarma de movimiento con mando a
distancia en llavero
MANUAL (p. 20)
Alarme de movimento com porta-chaves
remoto
HASZNÁLATI ÚTMUTATÓ (o. 23.)
Mozgásérzékelo riasztó kulcskarikára
fuzheto távirányítóval
KÄYTTÖOHJE (s. 26)
Liikehälytin avaimenperäohjaimella
BRUKSANVISNING (s. 29)
Rörelselarm med fjärrnyckelring
NÁVOD K POUŽITÍ (s. 32)
Poplašné zarízení s detekcí pohybu s
dálkovým ovládáním s príveskem na klíce
MANUAL DE UTILIZARE (p. 35)
Alarma cu senzor de miscare si
breloc-telecomanda
ΓΧΙΡΙΙΟ XPH΢ ΢H (ζ. 38)
΢υθαγλησμ εέθββμ η keyfob
BRUGERVEJLEDNING (s. 41)
Bevægelsesalarm med fjernbetjent
keyfob
VEILEDNING (s. 44)
Bevegelsesalarm med fjernkontroll
ϜϡϥϦϤϧϞЦϜϳ (ЅІЄ. 47)
ϥϼϷЁϴϿϼϻϴЊϼя ЃЄϼ ЂϵЁϴЄЇϺϹЁϼϼ
ϸ϶ϼϺϹЁϼя Ѕ ЄϴϸϼЂЃЇϿАІЂЀ
KILAVUZ (s. 50)
Uzaktan kumanda anahtarlıklı hareket
alarmı
2
ENGLISH
Motion alarm with remote keyfob
RF Romote keyfob Rotary mounting bracket
PIR
motion
senso
r
Learn
button
Alarm
speaker
Battery low
indicator Battery cover
Alarm Unit (Front) Alarm Unit (Back)
Battery low
indicator ON
OFF
3
Battery installation:
Alarm Unit
1. The battery compartment is accessed from the rear of the alarm unit by removing the back cover.
2. Insert 2 x “AA” size batteri arity as shown in the battery es (not included) conform the pol
compartment.
3. When the last battery is inserted the alarm will beep very loudly to indicate that the batteries are
installed properly.
4. Re-place the back cover again.
Remote Keyfob
The remote keyfob uses 1x A27 battery (included).
Note: The Battery Low indicator will light when the batteries needs to be replaced. Do not mix different
types of battery such as Alkaline and Carbon-zinc or old batteries with new. Remove the batteries if
the alarm will not be used for a period of time.
Alarm installation:
1. Place the alarm in the desired location with the rotary wall mount bracket.
Note: The motion detector of the alarm has a 6 meter range with approximate angles of 30º vertical
and 60º horizontal.
2. Fix the bracket to the wall with the supplied screws.
Note: The alarm can also be used without the bracket, as a free standing alarm.
Operation:
1. Press, at a distance of 10 meter, the “On” button of the remote control. A confirmation tone will
indicate that the alarm is armed and you have 30 seconds to leave the projected area. After this
time, if motion is detected, the alarm will sound.
2. Press, when entering the protected area, the “Off” button of the remote control within a distance of
10 meter to disarm the alarm. When entering the area, indicate that motion there is a short beep to
has been detected and you have a 4 second delay before the alarm will sound.
Learning remote keyfob code to the alarm unit:
After batteries installed, learn the Remote Keyfob code, press the Learn button on the Alarm unit and
press the ‘On’ button of keyfob. The Alarm unit will beep 2 times when set. The Alarm is ready to use.
Note: The alarm unit will need to relearn the Remote keyfob code every time the batteries are
replaced in either the alarm unit or the remote keyfob. One alarm unit can learn 3 remotes maximum.
Specifications:
Alarm: 130 dB
Detection: Infrared
Exit delay: 30 seconds
Entry delay: 4 seconds
Battery: 2 x “AA” (not included)


Specyfikacje produktu

Marka: Konig
Kategoria: detektor ruchu
Model: SEC-APR20

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Konig SEC-APR20, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje detektor ruchu Konig

Konig

Konig SAS-ASMS240 Instrukcja

31 Sierpnia 2024
Konig

Konig SEC-APR20 Instrukcja

31 Sierpnia 2024

Instrukcje detektor ruchu

Najnowsze instrukcje dla detektor ruchu