Instrukcja obsługi Klein Tools LH5266-23-L

Klein Tools Niesklasyfikowane LH5266-23-L

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Klein Tools LH5266-23-L (36 stron) w kategorii Niesklasyfikowane. Ta instrukcja była pomocna dla 4 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/36

Instructions for the Proper Use and Care of Klein®

Lineman’s Body Belts and Positioning Straps

Para español, vaya a la página 13.

Pour le français, allez à la page 25.

This instruction manual explains how to use,

inspect and maintain Klein lineman’s body belts

and positioning straps.

Klein manufactures a full line of lineman’s body belts

and positioning straps, designed to meet OSHA

criteria for positioning applications.

Note: Klein’s lineman’s body belts are for posi-

tioning applications only and should not be used

alone as a personal fall-arrest system, as defined

under Subpart M of OSHA standard 1926.

The positioning symbol shown in Figure 1

appears on warning tags attached to each

body belt. This symbol identifies the belt’s

OPE function.

Klein lineman’s body belts are available in full-floating,

semi-floating, or fixed styles. They combine the fea-

tures of an OPE (occupational protective equipment)

positioning belt with a specialized tool belt. They

meet or exceed all OSHA regulations, which apply to

positioning device systems, for power utilities (OSHA

1926.959) and telecommunications (OSHA 1910.268

and 1910.269). They also meet or exceed standards

ASTM F 887, CSA Z259.1 and CSA Z259.11. Each

belt is affixed with a permanent tag, which identi-

fies model number, serial number, size, and date of

manufacture.

Klein positioning straps are available in the follow-

ing lengths: 5'8" (1.7 m), 6' (1.8 m), 6'6" (2.0 m), 7'

(2.1 m), and 8' (2.4 m). They are designed to con-

form with OSHA standards 1910.268, 1910.269 and

1926.959.

All individuals who use Klein lineman’s body belts

and positioning straps must be instructed in how to

use that equipment correctly. Also, they must read,

understand and follow all instructions and warnings

contained in this booklet or packed with the product

before each use.

Note: For clarity, illustrations in this instruction

booklet do not show any warning tags or labels,

which are attached to each product.

Save these instructions. This equipment

must not be used by anyone who has not read,

understood and followed all the instructions and

inspection procedures contained in this booklet.

Failure to read, understand and follow all instruc-

tions may result in serious injury or death. Training

and instruction review should be repeated at regular

intervals by the user and his or her employer.

Figure 1

Introduction

Klein-Kord ®

The load-bearing material in Klein positioning straps

is our exclusive Klein-Kord, an exceptionally strong,

multi-ply filament nylon fabric that is neoprene-

impregnated, folded, and vulcanized.

Klein-Kord is abrasion-resistant, non-conductive,

virtually free from stretch, and flexible for ease of use

and durability. It has excellent chemical resistance,

and is virtually unaffected by creosote and other pole-

treatment chemicals. In addition, its properties and

wear characteristics remain essentially unchanged

at temperatures up to 250°F (121°C).

Shown below is Klein's six-ply Klein-Kord, which is

1-3/4" (44 mm) wide. The center plies of Klein-Kord

are red at the core. When the red plies appear,

remove the strap from use immediately and replace

it. This “early warning” feature is yet another safety

measure provided by Klein Tools.

Note: The red center plies may become discolored

in use. Therefore, visual inspection for wear before

each use is mandatory.

Drop-Forged Steel

Klein D-rings and tongue buckles are made of drop-

forged steel with a corrosion-resistant finish. All

Klein hardware is tested to meet or exceed appli-

cable OSHA standards.

Nylon Webbing

Klein uses a high-quality, commercial-grade nylon.

The nylon webbing is impregnated with latex or resin

for extra durability and abrasion resistance.

Leather

Rolled-edge, chrome-tanned leather is used for

cushioning in all Klein lineman’s belts. These cush-

ions have sponge-rubber cores for added comfort.

Other components, such as tool loops, are made

of harness leather. Body pads are made of latigo

leather, hand laced and stitched to the belt cushion.

Buckles and Billets

Klein lineman’s belts have drop-forged, single-

tongue buckles. Belt straps and billets are made

of Klein-Kord. On top-of-the-line belts, straps are

covered with harness leather.

Materials Used in Lineman’s Body Belts & Positioning Straps

Klein’s lineman’s body belts and posi-

tioning straps are designed for positioning purposes

only, and are not to be used for any other OPE func-

tion (such as fall arrest, suspension, or retrieval).

Klein strongly recommends that only

Klein components be used with any Klein lineman’s

equipment. Klein components should NOT be

interchanged with other components made by other

manufacturers, because Klein cannot guarantee

that components made by other manufacturers are

properly designed or are free of defects in materials

or workmanship.

Klein strongly recommends using fall-

arrest protection when working at any elevated

position. Therefore, independent fall-arrest equipment

should be used in addition to Klein's body belts

and positioning straps unless a competent person,

as defined by OSHA, has determined that such fall-

arrest equipment is not necessary or appropriate.

Six-ply Klein-Kord with red center plies

Physical Properties of Materials*

* This chart shows the general physical qualities of

the materials used in Klein lineman’s body belts and

positioning straps. Due to the wide variety of condi-

tions in the workplace, this information should only

be considered as a general guide, and a qualified

person should evaluate the specific applications and

hazards to which the materials will be exposed.

If you need more information, call Klein Tools at

1-800-553-4676.

Type of Material

Exposure to

Excessive Heat

Exposure to

Chemicals

Exposure to

Molten Metal or

Flame

Exposure to

Paints or Solvents

Nylon Poor resistance.

Becomes brittle,

has a shriveled

brown appear-

ance. Fibers will

break when flexed.

Weakens at 300°F

(149°C).

Generally good

resistance except

around strong acids

and phenolic com-

pounds (phenol

is present in coal

tar and wood tar),

which cause it to

become brittle.

Poor resistance.

Strands fuse

together and form

hard shiny spots.

Has hard and brittle

feel. Will not sup-

port combustion.

Generally offers

good resistance.

However, paint

can penetrate into

the weave and dry.

This can cause

webbing to become

hard and brittle

and can eventually

break the fibers.

Some solvents

may affect fibers

(see “Exposure to

Chemicals”).

Klein-Kord®Similar to nylon;

however, neoprene

will protect nylon

fabric for a period

of time.

Excellent resistance

to hydrocarbons

as used in wood

treatment, due to

neoprene.

Similar to nylon;

however neoprene

helps protect nylon

fabric from welding

splatter.

Excellent resistance;

however, some

strong solvents

could soften

neoprene and

attack nylon.

Leather Poor resistance.

Excessive heat

destroys strength.

Will burn at 330°F

(165°C). Dry leath-

er slowly at room

temperature.

Generally poor

resistance.

Chemicals tend to

dry leather out.

Will burn; however,

chrome leather is

excellent protection

against welding

splatter.

Generally poor

resistance.

Chemicals tend to

dry leather out.

Specyfikacje produktu

Marka:	Klein Tools
Kategoria:	Niesklasyfikowane
Model:	LH5266-23-L

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Klein Tools LH5266-23-L, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą

Twoje imię*

Twój email*

Napisz tutaj swoje pytanie

Instrukcje Niesklasyfikowane Klein Tools

Klein Tools 60822 Instrukcja

9 Października 2024

Klein Tools 56416 Instrukcja

9 Października 2024

Klein Tools 60821 Instrukcja

9 Października 2024

Klein Tools 29602 Instrukcja

9 Października 2024

Klein Tools BAT20GD14H Instrukcja

6 Października 2024

Klein Tools CN1907ARL Instrukcja

3 Października 2024

Klein Tools 29201 Instrukcja

3 Października 2024

Klein Tools 8220 Instrukcja

3 Października 2024

Klein Tools 2214 Instrukcja

3 Października 2024

Klein Tools S-12H Instrukcja

3 Października 2024

Instrukcje Niesklasyfikowane

Najnowsze instrukcje dla Niesklasyfikowane

Black Diamond BD1121530000ALL1 Instrukcja

15 Października 2024

Husqvarna K 970 SmartGuard Instrukcja

15 Października 2024

Stihl HT 70 Instrukcja

15 Października 2024

Ernesto H14270 Instrukcja

15 Października 2024

Uniden BT MIC KIT Instrukcja

15 Października 2024

Vaude Omnis Bike 26 Instrukcja

15 Października 2024

ART ProChannel II Instrukcja

15 Października 2024

Aukey DR02J Instrukcja

15 Października 2024

Master Lock 653EURD Instrukcja

15 Października 2024

Roland FR-18 Diatonic Instrukcja

15 Października 2024