Instrukcja obsługi Kenwood XM50R

Kenwood głośnik XM50R

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Kenwood XM50R (6 stron) w kategorii głośnik. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/6
Take the time to read through this instruction manual.
Familiarity with installation and operation procedures will help you obtain the best performance from your new power amplier.
For your records
Record the serial number, found on the back of the unit, in the spaces designated on the warranty card, and in the space provided below. Refer to the
model and serial numbers whenever you call upon your KENWOOD dealer for information or service on the product.
Model XM50F Serial number
Model XM50R Serial number
US Residents Only
Register Online
Register your KENWOOD product at https://registerkenwood.us.jvckenwood.com/
© 2023 JVCKENWOOD Corporation
XM50F
XM50R
5.25” COAXIAL SPEAKERS DESIGNED AND ENGINEERED TO CONNECT
AND MOUNT TO 2006-2013 HARLEY-DAVIDSON® TOURING MODEL
MOTORCYCLES WITH ADVANCED AUDIO RADIOS OR 1998-2013
HARLEY-DAVIDSON® TOURING MODEL MOTORCYCLES WITH 2 OHM
STABLE AMPLIFIERS INSTALLED
INSTRUCTION MANUAL
JVCKENWOOD Corporation
Contents
Section 1: XM50F Front Speaker Installation Instructions....3
Section 2: XM50R Rear Speaker Installation Instructions.....4
Warranty Info.................................................................................5
KENWOOD XM50F and XM50R speakers will work
best when powered by an amplier. They have an
imedance of 2 ohm and will cause damage if wired
directly to the built-in radio power in ‘98-’05 factory
Harley Davidson motorcycles.®
2
Safety precautionsSafety precautions
CAUTION
To avoid the risk of human injury o r pro perty
damage, be sure to read and observe the following
safety precautions:
• Consult a professional technician for installing and
connecting the speaker. — Incorrect installation may
lead to trac accidents or malfunctions.
• Avoid installation where the speaker in unstable. —
Make sure that the speaker is stationary and does not
rattle. Displacement of the speaker may cause injury.
• Do not modify the speaker. — Doing so may result in
smoke or re.
• Keep the volume of sound at an optimum level. —
Not being able to hear sounds from your surroundings
can lead to trac accidents.
• In case of abnormality, stop the use and disconnect
the speaker. — If operation is continued, smoke or re
may result. Disconnect the speaker and ask servicing.
• Always wear protective eyewear during installation.
• To prevent short-circuit, keep all wiring away from
moving parts, sharp edges, cut metal, etc.
• When removing or installing the grille, be careful not
to brush the unit with the edge of the grille.
• Do not switch ON power until wiring is completed.
FOR PROPER INSTALLATION AND USE
Please read the instructions carefully before using
this speaker:
• Be careful not to accidentally kick or apply any sort of
strong impact to the speaker.
• To prevent damaging the speaker, turn o the power
of the amplier before connecting it to the speaker.
• Do not use the provided parts for other purposes
Otherwise malfunction or re hazard could result.
NOTE
Observe the following cautions to prevent damage
to the speakers:
• You cannot input the same power as “peak power”
continually.
• When the volume is set too high, the sound may be
distorted or abnormal. Reduce the volume promptly in
case of such phenomena.
Section 1 - XM50F Front Speaker Installation
Instructions
Installation procedure
1. With your ignition switch in the “OFF” position, remove your outer fairing/headlamp
assembly and set it aside. Refer to a service manual if you need help with this. It’s always
a good idea to have a towel or something similar on your front fender to avoid dings or
scratches if anything is dropped.
2. Take the 2 wires o each speaker by gently pulling one at a time. Undo the screws that
attach each speaker/grille assembly to the inner fairing and remove them. Gently pull the
stock speaker out of each grille assembly.
3. Although the XM50F speakers will work behind the factory grille cloth, the metal mesh
grilles in this kit are designed to replace the front speaker grille cloth on 1998-2013 HD
Street Glides, Ultras, Classics, and Standards. The factory grille cloth is glued to a plastic
mesh, and together, is two-way taped to the main body of the grille assembly. You can
usually peel away the mesh from the body of the grille by hand. With the factory grille
cloth/mesh o, you should see the exposed two-way tape used to hold the factory mesh
on the main grille body. Before applying the new mesh, have a look as you will see it only
“lines up” one way.
4. “Clip” the XM50F speaker into each grille assembly so the speaker terminals are adjacent
to the thickest part of the speaker/grille assembly. When installed, this puts the speaker
terminals in the 12 o’clock (top) position. You DO NOT want the speaker connectors in
the 6 o’clock (bottom) position, as they may short out against the silver horizontal fairing
bracket. Place your new speaker/grille assembly onto the inner fairing and re-attach each
one using the OE screws. A hand screwdriver is recommended for this step.
5. Since these speakers are a direct replacement for the OE speakers, the female OE
“in-line” connectors mate with the male connectors on each speaker and only go on
one way. If you are replacing previously installed aftermarket speakers, you may need
to re-install the correct sized connectors (not supplied) onto the factory speaker wires,
noting that the smaller connector is the positive (+).
6. Once you are condent the factory wires are correctly attached to the new speakers,
turn on your radio to conrm that both speakers are playing. Then, re-install your fairing/
headlamp assembly.
3

Specyfikacje produktu

Marka: Kenwood
Kategoria: głośnik
Model: XM50R

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Kenwood XM50R, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje głośnik Kenwood

Kenwood

Kenwood KFC-X1720P Instrukcja

30 Września 2024
Kenwood

Kenwood KFC-P509PS Instrukcja

22 Września 2024
Kenwood

Kenwood XM50F Instrukcja

22 Września 2024
Kenwood

Kenwood KFC-P709PS Instrukcja

18 Września 2024
Kenwood

Kenwood Excelon KFC-X174 Instrukcja

14 Września 2024
Kenwood

Kenwood Excelon XR-1703HR Instrukcja

14 Września 2024
Kenwood

Kenwood XM50R Instrukcja

13 Września 2024
Kenwood

Kenwood XM69R Instrukcja

13 Września 2024
Kenwood

Kenwood Excelon XR-1701P Instrukcja

13 Września 2024
Kenwood

Kenwood KFC-1653MRB Instrukcja

13 Września 2024

Instrukcje głośnik

Najnowsze instrukcje dla głośnik

Teufel

Teufel Rockster Air Instrukcja

15 Października 2024
Alpine

Alpine PSS-22WRA Instrukcja

15 Października 2024
Bauhn

Bauhn APPS-0724 Instrukcja

15 Października 2024
Aiwa

Aiwa SP-A100 Instrukcja

15 Października 2024
Harman Kardon

Harman Kardon Citation One Instrukcja

14 Października 2024
Alpine

Alpine 30MC Instrukcja

14 Października 2024
Magnat

Magnat Needle 9000 ALU Instrukcja

14 Października 2024
Pioneer

Pioneer SP-T22A-LR Instrukcja

14 Października 2024
Sharp

Sharp PS-932 Instrukcja

14 Października 2024
Pyle

Pyle PDWR64BTW Instrukcja

13 Października 2024