Instrukcja obsługi Janome Sewist 500
Janome
Maszyny do szycia
Sewist 500
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Janome Sewist 500 (24 stron) w kategorii Maszyny do szycia. Ta instrukcja była pomocna dla 5 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek
Strona 1/24
SERVICE MANUAL
MODEL Sewist 500
INDEX
What to do when ...................................................................................................... 1-3
Service Access (1) Face plate..................................................................................... 4
Service Access (2) Base cover ................................................................................... 5
Service Access (3) Front cover ................................................................................... 6
Service Access (4) Rear cover .................................................................................... 7
Adjusting Thread Tension ............................................................................................ 8
Adjusting Presser Foot Height and Alignment............................................................. 9
Adjusting Needle Swing ............................................................................................ 10
Adjusting Needle Drop Position.... .............................................................................11
Adjusting Needle to Hook Timing .............................................................................. 12
Adjusting Needle Bar Height ..................................................................................... 13
Adjusting Clearance between Needle and Hook Point ............................................. 14
Adjusting Backlash between Hook Drive Gear and Lower Shaft Gear ..................... 15
Adjusting Feed Dog Height ....................................................................................... 16
Adjusting Feed Balance ............................................................................................ 17
Adjusting Buttonhole Feed Balance .......................................................................... 18
Adjusting Buttonhole Zero Feed................................................................................ 19
Adjusting Buttonhole Function .................................................................................. 20
Replacing Motor and Adjusting Motor Belt Tension................................................... 21
Replacement and Adjustment of the Needle Threader Plate .................................... 22
PARTS LIST ......................................................................................................... 23-45
1
What to do when
CONDITION CAUSE HOW TO FIX REFERENCE
1. Skipping 1. Needle is not inserted Insert the needle properly.
stitches properly.
2. Needle is bent or worn. Change the needle.
3. Incorrectly threaded. Rethread.
4. Needle or thread are Use the recommended
inappropriate for the sewing needle and thread.
fabric being sewn.
5. Sewing on stretch fabric. Use a #11 blue tipped needle.
6. Presser foot pressure Adjust the presser bar
is too weak. level to make the
pressure stronger.
7. Inappropriate needle See mechanical adjustment P.13
bar height. “Needle Bar Height”.
8. Inappropriate needle See mechanical adjustment P.12
to hook timing. “Needle to Hook Timing”.
9. Inappropriate needle See mechanical adjustment P.14
to hook clearance. “Clearance between Needle
and Hook Point”
2. Fabric not 1. Presser foot pressure Adjust the presser bar
moving is too weak. level to make the
pressure stronger.
2. Incorrect feed dog height. See mechanical P.16
adjustment “Feed Dog Height.”
3. Feed dog is in down position. Raise the feed dog level.
4. Thread on bottom side Make sure to bring
of fabric is jammed up. both needle and bobbin
thread under the foot
when starting sewing.
5. Feed dog teeth are worn. Change the feed dog.
Specyfikacje produktu
| Marka: | Janome |
| Kategoria: | Maszyny do szycia |
| Model: | Sewist 500 |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z Janome Sewist 500, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje Maszyny do szycia Janome
7 Sierpnia 2024
6 Sierpnia 2024
6 Lipca 2024
3 Lipca 2024
Instrukcje Maszyny do szycia
- Maszyny do szycia Toyota
- Maszyny do szycia Singer
- Maszyny do szycia Brother
- Maszyny do szycia Emerio
- Maszyny do szycia Baby Lock
- Maszyny do szycia Bernina
- Maszyny do szycia Juki
- Maszyny do szycia Kenmore
- Maszyny do szycia Pfaff
- Maszyny do szycia Kunft
- Maszyny do szycia Sewmaq
- Maszyny do szycia Jata
- Maszyny do szycia Elna
- Maszyny do szycia Yamato
- Maszyny do szycia RCE
- Maszyny do szycia White
- Maszyny do szycia Vendomatic
- Maszyny do szycia Empisal
- Maszyny do szycia Yamata
- Maszyny do szycia E And R
- Maszyny do szycia Silver
Najnowsze instrukcje dla Maszyny do szycia
14 Stycznia 2025
14 Stycznia 2025
13 Stycznia 2025
13 Stycznia 2025
13 Stycznia 2025
13 Stycznia 2025
13 Stycznia 2025
12 Stycznia 2025
12 Stycznia 2025
15 Października 2024