Instrukcja obsługi ILive IAEBT270

ILive Zatyczka do uszu IAEBT270

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla ILive IAEBT270 (2 stron) w kategorii Zatyczka do uszu. Ta instrukcja była pomocna dla 9 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/2

Truly Wire-Free Earbuds

User’s Guide for Model IAEBT270 v2470-01

Volume/Skip

Press to adjust volume.

Press and hold to skip ahead

or back.

LED Indicator

Flashing red and blue= Ready to pair

Solid red= Charging

Note: When fully charged the light

will change to blue for a few seconds

and then turn o.

Function Button

Press and hold to power ON or OFF.

Press to play or pause audio.

Press to answer incoming phone call.

Press quickly 2 times to manually pair.

Orientation & Controls

Controls are the same on both earbuds.

Charging the Case

Note: Placing the earbuds in the case will automatically

power them OFF.

• Using a cable, connect to the USB USB-C to USB

port of a powered on computer or USB power

adaptor (Not included).

• Initial charge time is approximately 2 hours.

Charge fully before use.

• While the case is charging, the will Case LED

display a blinking red light. When the unit is fully

charged it will display a solid red light.

Features

• True Wireless Stereo

• Sweat proof

• Bluetooth Wireless: range 49 ft.

• Built-in microphone

• Voice prompts announce earbud

operations

• Digital volume control

• Built-in rechargeable battery:

approximately 5 hrs playtime at 50%

• USB-C port for battery recharge

Includes

• 3 pairs of eartips: 1 small, 1 medium,

1 large

• Charging case

• USB-C to USB charging cable

• User’s Manual

Charging Contacts Case Power

Button

Press to activate

charging.

Case LED

Solid blue when ON.

Place earbuds onto

Charging Contacts

in the case to start

charging.

Customer Support

Customer Service: | Email Support: 1-888-999-4215 prodinfo@

dpiinc.com partsinfo@dpiinc.com | Email Parts:

For Warranty Information and the most up-to-date version of

this User’s Guide, go to www.iLiveElectronics.com

To download this User’s Guide in English, Spanish, or French, or

to get answers to frequently asked questions, visit the support

section at: www.iLiveElectronics.com

Para descargar este Manual del Usuario en inglés, español y

francés, o para obtener respuestas a preguntas frecuentes,

visite la sección de apoyo en: www.iLiveElectronics.com

Pour télécharger ce guide de l’utilisateur en anglais, espagnol

ou français, ou pour obtenir des réponses à des questions

fréquemment posées, consultez la rubrique d’assistance sur:

www.iLiveElectronics.com

International (DPI, Inc.) All other trademarks

appearing herein are the property of their

respective owners. Specications are subject

to change without notice.

FCC Warnings

WARNING: Changes or modications to this unit not extaply approved by the

party responsible for compliance could void the user’s authority to operate the

equipment.

NOTE: This equipment has been tested and found to comply with the limits

for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits

are designed to provide reasonable protection against harmful interference in

a residential installation. This equipment generates, uses, and can radiate radio

frequency energy and, if not installed and used in accordance with the instructions,

may cause harmful interference to radio communications. However, there is

no guarantee that interference will not occur in a particular installation. If this

equipment does cause harmful interference to radio or television reception, which

can be determined by turning the equipment o and on, the user is encouraged to

try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit dierent from

that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

Additional Warnings

• WARNING: To prevent re or shock hazards, do not expose this

unit to rain or moisture.

• WARNING : Where the mains plug or appliance coupler is used

as the disconnect device, such disconnect device shall remain

readily operable.

• Lithium batteries, like all rechargeable batteries, are recyclable

and should be recycled or disposed of according to state and local

guidelines. They should never be disposed of in normal household

waste, and they should never be incinerated, as they might

explode. Contact your local government for disposal or recycling

practices in your area.

• To avoid hearing damage, make sure that the volume on your

music player is turned down before connecting your headphones.

After placing headphones in/on your ears, gradually turn up the

volume until you reach a comfortable listening level.

Speakerphone

1. To accept a call, press the Function button, or use the

controls on the connected phone.

2. To end a call, press the or use the Function button,

controls on the connected phone.

WARNING : This product can expose you to chemicals

including lead, which is known to the State of California to

cause cancer and birth defects or other reproductive harm.

For more information go to www.P65Warnings.ca.gov.

This product meets and complies with all Federal

regulations.

Previously Connected Devices

• Once the earbuds have been linked and

connected to a device, the earbuds will auto

power ON, link and connect to the last Bluetooth

device whenever removed from the case.

• To manually pair to another device, press the

Function button quickly two times. The earbuds

will enter pairing mode and can connect to a

new device.

• To re-connect to a dierent device, turn o

Bluetooth on unwanted devices, then access the

Bluetooth settings menu on the device you wish

to use and select IAEBT270.

Troubleshooting

If the earbuds experience any static, delay or cutting

out of sound follow these steps.

1. Make sure the earbuds are fully charged.

2. Power the earbuds OFF, then ON again. Let them

reconnect automatically and try playing audio

again. Repeat if needed.

Made

Green

Initial Linking of Earbuds &

Pairing to a Bluetooth Device

To link the earbuds:

Removing the earbuds from the case will automatically POWER

them ON and link them after a few seconds. If not, each

earbud must be powered ON seperately if they were manually

powered OFF and they will automatically link to each other

after a few seconds. A prompt will also announce the link. Once

earbuds are linked, powering OFF one earbud will power OFF

both earbuds.

1. With the earbuds linked, you can now connect to

your Bluetooth device. The on one LED Indicator

of the earbuds will begin ashing blue and red,

indicating it is ready to pair to a Bluetooth device.

2. On your Bluetooth device, access Bluetooth

Settings and search for nearby devices.

Select when it is discovered. When IAEBT270

successfully connected to your Bluetooth device,

the LED indicator will slowly ash blue and a

voice prompt will announce the connection.

3. Audio played through the connected Bluetooth

device will now be heard through both earbuds.

Use the controls on the connected device or

earbuds to play audio and adjust volume.

PLEASE NOTE: Due to the nature of truly

wireless earbuds, you may experience

slight interruptions with your audio in

areas with multiple 2.4Ghz bands or in

high wireless trac areas.

If the earbuds should become unpaired or will not

connect normally, open your device’s Bluetooth

Settings Menu and follow these steps:

1. Disconnect, then reconnect to the earbuds.

2. If the problem persists, delete the earbuds from

the list of available devices(“Forget This Device”).

3. Turn Bluetooth OFF then ON again, and repeat

the steps.Initial Bluetooth Connection

Specyfikacje produktu

Marka:	ILive
Kategoria:	Zatyczka do uszu
Model:	IAEBT270

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z ILive IAEBT270, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą

Twoje imię*

Twój email*

Napisz tutaj swoje pytanie

Instrukcje Zatyczka do uszu ILive

ILive IAEB29 Instrukcja

4 Października 2024

ILive IAEBT270 Instrukcja

4 Października 2024

ILive IAEBT209 Instrukcja

4 Października 2024

ILive IAEBT300 Instrukcja

4 Października 2024

ILive IAEB109 Instrukcja

4 Października 2024

ILive IAEP48B Instrukcja

24 Września 2024

ILive IAEB25B Instrukcja

24 Września 2024

ILive IAEB25 Instrukcja

24 Września 2024

ILive IAEL65 Instrukcja

24 Września 2024

ILive IAEB37 Instrukcja

24 Września 2024

Instrukcje Zatyczka do uszu

Najnowsze instrukcje dla Zatyczka do uszu

Haylou GT1 Pro Instrukcja

14 Stycznia 2025

JLab Epic Sport ANC 3 Instrukcja

14 Stycznia 2025

JLab Jbuds Sport ANC 4 Instrukcja

14 Stycznia 2025

Motorola Moto Buds 125 Instrukcja

11 Stycznia 2025

Motorola Moto Buds 500 ANC Instrukcja

11 Stycznia 2025

GMB Audio TWS-02 Instrukcja

8 Stycznia 2025

Adidas FWD-02 Instrukcja

8 Stycznia 2025

Skullcandy Jib True XT 2 Instrukcja

7 Stycznia 2025

JBL Endurance Race 2 Instrukcja

5 Stycznia 2025

JBL Tune Beam 2 Instrukcja

5 Stycznia 2025