Instrukcja obsługi IHome IBT88

IHome podstawa/stacja dokująca IBT88

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla IHome IBT88 (2 stron) w kategorii podstawa/stacja dokująca. Ta instrukcja była pomocna dla 4 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/2

Model iBT88

Bluetooth

Rechargeable

Speakers System

Questions? Visit www.ihomeaudio.com

iHome Products, a division of SDI Technologies Inc. (hereafter referred to as SDI), warrants this

product to be free from defects in workmanship and materials, under normal use and conditions,

for a period of one (1) year from the date of original purchase.

Should this product fail to function in a satisfactory manner, it is best to first return it to the store

where it was originally purchased. Should this fail to resolve the matter and service still be required

by reason of any defect or malfunction during the warranty period, SDI will repair or, at its discretion,

replace this product without charge. This decision is subject to verification of the defect or

malfunction upon delivery of this product to the Factory Service Center authorized by SDI Customer

Service. The product must include proof of purchase, including date of purchase. An out-of-warranty

fee for service will be charged for units that are received without proof of purchase.

Before returning this product for service, please first replace the batteries (if applicable) with fresh

ones, as exhausted or defective batteries are the most common cause of problems encountered.

If service is still required:

1. Call SDI Customer Service at 1-800-288-2792 for Return Authorization and for the address

of the Factory Service Center.

2. Remove the batteries (if applicable) and pack the unit in a well padded, heavy corrugated box.

SDI is not responsible for damage that occurs during shipping to the Factory Service Center.

3. Enclose a photocopy of your sales receipt, credit card statement, or other proof of the date

of purchase, if within the warranty period. Also include your name and address information, a

brief description for why the unit is being returned, and the return authorization number. No unit

can be processed without a return authorization number.

4. Write the return authorization number on the side of the shipping package and send the unit

prepaid and insured to the Factory Service Center address authorized by SDI Customer Service.

Disclaimer of Warranty

NOTE: This warranty is valid only if the product is used for the purpose for which it was designed.

It does not cover (i) products which have been damaged by negligence or willful actions, misuse

or accident, or which have been modified or repaired by unauthorized persons; (ii) cracked or

broken cabinets, or units damaged by excessive heat; (iii) damage to digital media players, CD’s

or tape cassettes (if applicable); (iv) the cost of shipping this product to the Factory Service Center

and its return to the owner.

This warranty is valid only in the United States of America and does not extend to owners of the

product other than to the original purchaser. In no event will SDI or any of its affiliates, contractors,

resellers, their officers, directors,

shareholders, members or agents be liable to you or any third party for any consequential or

incidental damages, any lost profits, actual, exemplary or punitive damages. (Some states do

not allow limitations on implied warranties or exclusion of consequential damages, so these

restrictions may not apply to you.) This warranty gives you specific legal rights, and you may also

have other rights which vary from state to state.

Your acknowledgement and agreement to fully and completely abide by the above mentioned

disclaimer of warranty is contractually binding to you upon your transfer of currency (money order,

cashier's check, or credit card) for purchase of your SDI product.

Questions? Visit www.ihomeaudio.com

or call 1-800-288-2792 Toll Free

Limited 1 Year Warranty Information

Printed in ChinaiBT88-012513-A

A Consumer Guide to Product Safety

When used in the directed manner, this unit has been designed and manufactured to ensure

your personal safety. However, improper use can result in potential electrical shock or fire hazards.

Please read all safety and operating instructions carefully before installation and use, and keep

these instructions handy for future reference. Take special note of all warnings listed in these

instructions and on the unit.

1. Water and Moisture – The unit should not be used near water. For example: near a

bathtub, washbowl, kitchen sink, laundry tub, swimming pool or in a wet basement.

2. Ventilation – The unit should be situated so that its location or position does not interfere

with its proper ventilation. For example, it should not be situated on a bed, sofa, rug or

similar surface that may block ventilation openings. Also, it should not be placed in a built-in

installation, such as a bookcase or cabinet, which may impede the flow of air through the

ventilation openings.

3. Heat – The unit should be situated away from heat sources such as radiators, heat registers,

stoves or other appliances (including amplifiers) that produce heat.

4. Power Sources – The unit should be connected to a power supply only of the type

described in the operating instructions or as marked on the appliance.

5. Power-Cable Protection – Power supply cables should be routed so that they are not

likely to be walked on or pinched by items placed upon or against them. It is always best

to have a clear area from where the cable exits the unit to where it is plugged into an AC

socket.

6. Cleaning – The unit should be cleaned only as recommended. See the Maintenance

section of this manual for cleaning instructions.

7. Objects and Liquid Entry – Care should be taken so that objects do not fall and liquids

are not spilled into any openings or vents located on the product.

8. – Do not use attachments not recommended by the product manufacturer.Attachments

9. Lightning and Power Surge Protection – Unplug the unit from the wall socket and

disconnect the antenna or cable system during a lightning storm or when it is left unattended

and unused for long periods of time. This will prevent damage to the product due to lightning

and power-line surges.

10. Overloading – Do not overload wall sockets, extension cords, or integral convenience

receptacles as this can result in a risk of fire or electric shock.

11. Damage Requiring Service – The unit should be serviced by qualified service personnel

when:

A. the power supply cable or plug has been damaged.

B. objects have fallen into or liquid has been spilled into the enclosure.

C. the unit has been exposed to rain.

D. the unit has been dropped or the enclosure damaged.

E. the unit exhibits a marked change in performance or does not operate normally.

12. Periods of Nonuse – If the unit is to be left unused for an extended period of time, such

as a month or longer, the power cable should be unplugged from the unit to prevent damage

or corrosion.

13. Servicing – The user should not attempt to service the unit beyond those methods described

in the user’s operating instructions. Service methods not covered in the operating instructions

should be referred to qualified service personnel.

Questions? Visit www.ihomeaudio.com

or call 1-800-288-2792 Toll Free

• Place the unit on a level surface away from sources of direct sunlight or excessive heat.

• Protect your furniture when placing your unit on a natural wood and lacquered finish. A cloth

or other protective material should be placed between it and the furniture.

• Clean your unit with a soft cloth moistened only with mild soap and water. Stronger cleaning

agents, such as Benzene, thinner or similar materials can damage the surface of the unit.

Maintenance

• Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance

could void the user’s authority to operate the equipment.

• NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device,

pursuant to Part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against harmful interference in a residential

installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and

used in accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment

does cause harmful interference to radio or television reception, which can be determined by turning the

equipment off and on, the user is encouraged to try to correct the interference by one or more of the following

measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

This Class B digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada

IMPORTANT

Read before proceeding

If you have any question regarding the operation or use of this product, please visit www.ihomeaudio.com

to view answers to frequently asked questions.

To learn more about this and other iHome products, please visit us online at www.ihomeaudio.com

For Models That Use Lithium Batteries:

• Lithium batteries can explode or cause burns if disassembled, shorted, recharged, exposed to water, fire,

or high temperatures & not handled appropriately

• Do not place loose batteries in a pocket, purse, or other container containing metal objects, do not mix with

used or other battery types, or store with hazardous or combustible materials.

• Store in cool, dry, ventilated area.

• Follow applicable laws and regulations for transport and disposal.

This device complies with Part 15 of the FCC Rules, operation is subject to the

following two conditions: (1) This device may not cause harmful interference, and (2)

this device must accept any interference received, including interference that may

cause undesired operation.

FCC ID:EMOIBT88

IC:986B-IBT88

FCC Radiation Exposure Statement

This equipment complies with FCC RF radiation exposure limits set forth for an

uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other

antenna or transmitter.

This Device complies with RSS-210 of the IC Rules; Operation is subject to the following two conditions:

(1) This device may not cause interference and

(2) This device must accept any interference received, including interference that may cause undesired

operation

FCC Information

QDID B020568

Charging the iBT88

USB

• Plug one end of the included 3.5mm audio cable into the speaker

out jack on the Right Speaker and the other end into the speaker in

jack on the Left Speaker.

• Slide the

Off/Bluetooth/Aux Switch

(

) on the Right Speaker

to the Bluetooth position ( ). The light will flash blue as the speaker

attempts to auto-link with the last previously linked unit in range

(30 feet). If no device is found within 10 seconds, the light will flash

blue and red to indicate pairing attempt.

• Place your audio device in Bluetooth mode (often found in the

device’s Settings or Tools menu) and make it “discoverable”. “iHome

iBT88” should appear on your device. If “Not Paired, “Not

Connected” or similar message appears, select “iHome iBT88” to

connect.

• Once paired, the light will glow solid blue and a confirmation beep

will sound. If pairing is not successful, turn the power OFF on the

Right Speaker and repeat pairing procedure.

• To listen to Bluetooth audio, make sure the Right Speaker is in

Bluetooth mode ( ) and the Left Speaker is connected.

• Control Bluetooth audio from your device.

Remember to turn off the speaker and your device after listening.

NOTE: When unit is charging, the blue light will appear magenta.

Using Bluetooth with the iBT88

The iBT88 is powered by a rechargeable battery in the Right Speaker.

When the light flashes red, or if you start to notice sound distortion at

higher volumes, it's time to recharge the battery.

• Connect a micro-USB plug to the input jack on the Right Speaker.

• Connect the larger USB plug to a powered USB port, such as that on

a computer. The light on the speaker will turn to solid red while

charging and turn off when fully charged.

Note: you can continue to listen to the speakers while the Right

Speaker is charging.

The rechargeable battery in your speaker can only be replaced

by iHome Consumer Repair Department.

Charging the iBT88

Bluetooth Mode

Off/Bluetooth/Aux Switch

LED

Speaker Out Charging/aux-in

Speaker In

Micro USB plug

Standard

USB plug

3.5mm audio plug

3.5mm audio cable

Combination cable

Aux-in Mode

mobile phone PSP

Connect 3.5mm audio cable

Device must be

within 30 feet (9.14 meters)

iPod

Laptop

MP3/MP4

• Plug one end of the included 3.5mm audio cable into the speaker

out jack on the Right Speaker and the other end into the speaker

in jack on the Left Speaker.

• Connect the stereo 3.5mm audio plug on the combination cable to

the headphone jack or line-out of any audio device and connect the

micro-USB plug into the on the Right charging / aux-in jack

Speaker.

• Slide the

Off/Bluetooth/Aux Switch

( ) switch on the Right

Speaker to the position. The blue power light will come on. aux

• Press play on your audio device and adjust its volume to listen to

audio.

Remember to turn off the speaker and your device after listening.

Using the iBT88 with Aux Devices

Left Speaker Right Speaker

TROUBLESHOOTING

• If there is no sound coming

through speaker, try turning the

speaker OFF, then ON again

• ALWAYS connect audio cable

BEFORE turning speaker ON

Specyfikacje produktu

Marka:	IHome
Kategoria:	podstawa/stacja dokująca
Model:	IBT88
Kolor produktu:	Czarny
Typ produktu:	Przenośny głośnik stereo
Rodzaj zasilania:	Battery, USB
Wysokość produktu:	79 mm
Szerokość produktu:	72 mm
Głębokość produktu:	68 mm
Waga produktu:	240 g
Rekomendowane użycie:	Uniwersalne
Technologia łączności:	Przewodowy i Bezprzewodowy
Bluetooth:	Tak
Impedancja:	- Ω
Ilość głośników:	2
Moc wyjściowa (RMS):	- W
Technologia baterii:	Litowo-jonowa (Li-Ion)
Wi-Fi:	Nie
Kanały wyjścia audio:	2.0 kan.
Wyjście na słuchawki:	Tak
Rodzaj baterii:	Wbudowany
Diody LED:	Ładowanie
Wejście liniowe:	Tak
Wejście AUX:	Tak
Zasięg częstotliwości:	- Hz
Złącze 3,5 mm:	Tak
Głębokość:	2.68 "
Wysokość (imperialna):	3.11 "
Szerokość (imperialna):	2.84 "
Ładowanie przez łącze USB:	Tak
Etui podróżne:	Tak