Instrukcja obsługi Husqvarna 550 XP G
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Husqvarna 550 XP G (23 stron) w kategorii piła. Ta instrukcja była pomocna dla 20 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek
Strona 1/23
545 Mark II, 545G Mark II, 550 XP® Mark II,
550 XP® G Mark II
EN Operator's manual 2-39
FR-CA Manuel d’utilisation 40-81
ES-MX Manual del usuario 82-123
Contents
Contents
Contents
ContentsContents
Introduction..................................................................... 2
Safety..............................................................................4
Assembly........................................................................ 9
Operation...................................................................... 10
Maintenance................................................................. 21
Troubleshooting............................................................ 32
Transportation and storage...........................................33
Technical data.............................................................. 33
Accessories.................................................................. 34
Warranty....................................................................... 37
....................................................................................0
Introduction
Introduction
Introduction
IntroductionIntroduction
Intended use
Intended use
Intended use
Intended useIntended use
This product is intended for sawing in wood.
Note:
Note:
Note:
Note: Note: National regulations can set limit to the operation
of the product.
Product description
Product description
Product description
Product descriptionProduct description
The Husqvarna 545 Mark II, 545G Mark II, 550 XP Mark
II, 550 XPG Mark II are chainsaw models with a
combustion engine.
Work is constantly in progress to increase your safety
and efficiency during operation. Speak to your servicing
dealer for more information.
Product overview
Product overview
Product overview
Product overviewProduct overview
2
6
7
8
9
10
11
12
14
13
15
16
30
17
29
28
18
19
20
21
5
5
24
26
22
32 33 3425
3
4
5
27
31
23
1. Cylinder cover
2. Spark plug
3. Spark plug cap
4. Air filter
5. Vibration damping system, 3 units
6. Throttle trigger lockout
7. Rear handle
8. Information and warning decal
9. Throttle trigger
10. Start/stop switch
2
2
2
22 544 - 006 - 04.06.2020
11. Fuel level window
12. Fuel tank
13. Air purge bulb
14. Starter rope handle
15. Starter housing
16. Chain oil tank
17. Muffler
18. Chain brake and front hand guard
19. Front handle
20. Switch for heated handles (545G Mark II, 550 XPG
Mark II)
21. Right hand guard
22. Clutch cover
23. Clutch drum
24. Oil pump adjustment screw
25. Chain tensioning screw
26. Chain catcher
27. Spiked bumper
28. Saw chain
29. Guide bar
30. Bar tip sprocket
31. Brake band
32. Guide bar cover
33. Operator's manual
34. Combination wrench
Symbols on the product
Symbols on the product
Symbols on the product
Symbols on the productSymbols on the product
Stop.
Be careful and use the product correctly.
This product can cause serious injury or
death to the operator or others.
Read the operator's manual carefully and
make sure that you understand the
instructions before you use this product.
Always wear approved protective helmet,
approved hearing protection and eye
protection.
Use 2 hands to operate the product.
Do not operate the product with one hand
only.
Do not let the guide bar tip touch an object.
Warning! Kickback can occur when the
guide bar tip touches an object. A kickback
causes a lightning fast reverse reaction that
throws the guide bar up and in the direction
of the operator. Can cause serious injury.
Chain brake, engaged (right). Chain brake,
disengaged (left).
Choke.
Air purge.
Adjustment of the oil pump.
Fuel.
Chain oil.
If your product has this symbol it has heated
handles.
yyyywwxxxx
yyyywwxxxx
yyyywwxxxx
yyyywwxxxxyyyywwxxxx The rating plate shows se-
rial number. is the
yyyy
yyyy
yyyy
yyyyyyyy
production year and is
ww
ww
ww
wwww
the production week.
Husqvarna H25
16
Max 12T
Recommended cutting
equipment in this exam-
ple: Guide bar length 16
in, maximum nose radius
12 Teeth and chain type
Husqvarna H25.
XX
Computed kickback bar stopping angle
without actuated chainbrake, CKA wob.
XX
Computed kickback bar stopping angle with
actuated chainbrake, CKA wb.
544 - 006 - 04.06.2020 3
3
3
33
Specyfikacje produktu
| Marka: | Husqvarna |
| Kategoria: | piła |
| Model: | 550 XP G |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z Husqvarna 550 XP G, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje piła Husqvarna
20 Maja 2024
19 Maja 2024
12 Maja 2024
10 Maja 2024
Instrukcje piła
- piła Worx
- piła Milwaukee
- piła Stihl
- piła Bosch
- piła Parkside
- piła Black & Decker
- piła Lider
- piła Hazet
- piła DeWalt
- piła Einhell
- piła Silverline
- piła Makita
- piła Ozito
- piła RYOBI
- piła DEDRA
- piła Trotec
- piła Güde
- piła Texas
- piła Zipper
- piła McKenzie
- piła Fieldmann
- piła PowerPlus
- piła Vonroc
- piła Metabo
- piła Cocraft
- piła Snow Joe
- piła Yellow Garden Line
- piła Ideal
- piła Kress
Najnowsze instrukcje dla piła
10 Lipca 2024
10 Lipca 2024
9 Lipca 2024
8 Lipca 2024
8 Lipca 2024
8 Lipca 2024
8 Lipca 2024
8 Lipca 2024
8 Lipca 2024
8 Lipca 2024