Instrukcja obsługi Husqvarna 281 XP

Husqvarna piła 281 XP

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Husqvarna 281 XP (40 stron) w kategorii piła. Ta instrukcja była pomocna dla 20 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/40
281 XP®, 288 XP®
EN Operator's manual 2-37
Contents
Introduction..................................................................... 2
Safety..............................................................................3
Assembly........................................................................ 9
Operation...................................................................... 10
Maintenance................................................................. 20
Troubleshooting............................................................ 32
Transportation and storage...........................................33
Technical data.............................................................. 34
Accessories.................................................................. 35
EC Declaration of Conformity....................................... 37
Introduction
Intended use
This product is intended for sawing in wood.
Note: National regulations can set limit to the operation
of the product.
Product description
The Husqvarna 281 XP, 288 XP are chainsaw models
with a combustion engine.
Work is constantly in progress to increase your safety
and efficiency during operation. Speak to your servicing
dealer for more information.
Product overview
25
23
26
22
1824
2 3 32 33
128
20311174
6
5
16
17
19
30
29
9
12
24
31
10
8
21
27
13 14 15
31
31
1. Cylinder cover 2. Front handle
2964 - 001 - 10.12.2018
3. Chain brake and front hand guard
4. Starter housing
5. Chain oil tank
6. Starter rope handle
7. Adjuster screws carburetor
8. Choke control
9. Rear handle
10. Start/stop switch
11. Fuel tank
12. Muffler
13. Bar tip sprocket
14. Saw chain
15. Guide bar
16. Spiked bumper
17. Chain catcher
18. Clutch cover
19. Right hand guard
20. Throttle trigger
21. Throttle trigger lockout
22. Decompression valve
23. Combination wrench
24. Chain tensioning screw
25. Operator's manual
26. Transportation guard
27. Start throttle lock
28. Information and warning decal
29. Product and serial number plate
30. Brake band
31. Vibration damping system, 3 units
32. Spark plug
33. Spark plug cap
Symbols on the product
Be careful and use the product correctly.
This product can cause serious injury or
death to the operator or others.
Read the operator's manual carefully and
make sure that you understand the
instructions before you use this product.
Always wear approved protective helmet,
approved hearing protection and eye
protection.
This product complies with applicable EC
Directives.
Noise emission to the environment complies
with applicable EC Directives. The noise
emission of the product is specified in
Technical data on page 34
and on the
label.
Chain brake, engaged (right). Chain brake,
disengaged (left).
Choke.
Decompression valve.
Fuel.
Chain oil.
yyyywwxxxx The rating plate shows se-
rial number. is theyyyy
production year and isww
the production week.
Note: Other symbols/decals on the product refer to
certification requirements for some markets.
Safety
Safety definitions
Warnings, cautions and notes are used to point out
specially important parts of the manual.
WARNING: Used if there is a risk of injury or
death for the operator or bystanders if the
instructions in the manual are not obeyed.
CAUTION: Used if there is a risk of damage
to the product, other materials or the
adjacent area if the instructions in the
manual are not obeyed.
Note: Used to give more information that is necessary in
a given situation.
964 - 001 - 10.12.2018 3


Specyfikacje produktu

Marka: Husqvarna
Kategoria: piła
Model: 281 XP

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Husqvarna 281 XP, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje piła Husqvarna

Instrukcje piła

Najnowsze instrukcje dla piła