Instrukcja obsługi HQ TORCH-EMC-02

HQ radio TORCH-EMC-02

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla HQ TORCH-EMC-02 (44 stron) w kategorii radio. Ta instrukcja była pomocna dla 9 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/44
1
TORCH-EMC-02
MANUAL (p. 2)
Dynamo radio with torch
MODE D’EMPLOI (p. 7)
Radio et lampe torche Dynamo
MANUALE (p. 13)
Radio a dinamo con torcia
BRUKSANVISNING (s. 25)
Radio med handlampa
MANUAL DE UTILIZARE (p. 31)
Lanternă cu dinam şi radio
BRUGERVEJLEDNING (p. 37)
Dynamo radio med lys
HASZNÁLATI ÚTMUTATÓ (o. 19.)
Dinamós rádió lámpával
KÄYTTÖOHJE (s. 22)
Dynamoradio/taskulamppu
ANLEITUNG (s. 4)
Dynamoradio mit Taschenlampe
GEBRUIKSAANWIJZING (p. 10)
Dynamoradio met zaklantaarn
MANUAL DE USO (p. 16)
Radio Dínamo con Linterna
NÁVOD K POUŽITÍ (s. 28)
Dynamo rádio se svítilnou
ΕΓΧΕΙΡΙΔΙΟ XPHΣHΣ (σελ. 34)
Ράδιο δυναμό με φακό
VEILEDNING (σελ. 40)
Dynamo-radio med lommelykt
2
ENGLISH
OPERATING MANUAL
E-1073
Flashlight Radio
R 0.0
Parts Instruction
1. Volume Knob
2. FM/AM Band
3. Tuning
4. Speaker
5. LCD Display
6. Handle
7. Time Set Button
8. Hour Button
9. Min Button
10. Torch-Hi/Lo/Off/Lantern
11. FLASHLIGHT
12. LANTERN
13. Dynamo Handle
14. Battery Door
15. Carry Strap (With antenna)
16. DC IN jack
POWER SOURCE
BATTERY OPERATION
1. Open the Battery Cover.
2. Put 4“AA” size (UM-3) batteries into the battery compartment, making sure that the batteries are installed
in the designated numerical order and that the proper polarities (“+”and“-”) are maintained.
To prevent possible damage to this unit:
* Load new batteries with their polarities (“+” and“-”) aligned correctly.
* Do not apply heat to batteries, or internal short circuit may occur.
* If this unit is not going to be used for a long period of time, remove all batteries and store them in a cool
and dry place.
* Remove spent batteries immediately and dispose them.
* Do not use old and new batteries together. Also never use an alkaline battery with a manganese battery.
To Charge the Built-in Ni-Mh Batteries
1. Forbetterqualityduringcharging,it’sbesttoturnofftheradio,ashlightandlantern.
2. Pull the cranking handle out.
3. Turn the cranking handle at a speed of 120 turns per minute or charge by DC IN, and the built-in batteries
will be full charged in approximately 1 hour.
3
4. Continuous cranking during one minute will allow the unit to work for approximately 3 to 5 minutes. The
workingtimeforradioorashlightwilldependonthebatterylevelandthecrankingspeed.
 Whentheunitisfullycharged,theradiowillworkforabout3hoursata1/3volumelevel;theashlightwill
work for approximately 1 hour; the lantern will work for about 1.5 hours; all functions used together and
the batteries will be exhausted in approximately 1 hour.
Caution Note
• Itisnormaltohearnoisewhenyoucrankthedynamopowergenerator.
• Ifyouarecrankingtooslow,thebatterieswillnotbechargedatall.Werecommendtocrackthehandle
with about 120 turns a minute.
• Iftheradioissetonandworkingforalongtimeandthebatteriesareexhausted,itshortensthebattery
lifeanditwillbehardtorechargebycrankingagain.Sopleasedon’tleavetheradioorashlightonuntill
the battery is gone. If that happens, it is normal that battery is not holding the power well when you try
hard to crank it after the battery is left drain to no power.
If so, you have to use an AC adaptor to restore and charge the batteries to wake up and keep the
battery a life. We strongly recommend you to charge the radio every month no matter you use it or not.
Furthermore, never leave the unit on before it is too low in batteries.
RADIO OPERATION
1. Rotate the Volume Knob clockwise to turn the radio on and adjust to the desired sound level.
2. SlidetheFM/AMBandtorstbandtoselecttheFMband.
3. Slide the FM/AM Band to the second band to select the AM frequency.
4. Rotate the Tuning knob to the desired station.
5. Turn off the power by rotating the Volume Knob to Power Off / minimum position till a “click” sound is
heard after use.
LIGHT
1. Slide the Torch-Hi/Lo/Off/Lantern to the Torch-Hi position, and all LEDS will light up all the times.
2. Slide the Torch-Hi/Lo/Off/Lantern to the Lo position, and several LEDS will light up all the times.
3. Slide the Torch-Hi/Lo/Off/Lantern to the Lantern position, and the LANTERN will light up on the handle all
the times.
4. Turn off the lantern by slide the Torch-Hi/Lo/Off/Lantern to the OFF position.
LCD CLOCK
Press and hold the Time Set button, then press the Hour and Min button to adjust the time.
HELPFUL HINTS
* If the set is not used for a long period of time, remove all the batteries to prevent potential damage due to
possible battery leakage.
* Do not subject the set to a temperature of over 60 C ( 140 F ) because characteristics of the internal
parts may be adversely affected by heat, especially never leave the set in a car exposed to direct sunlight
for a long period of time with the doors and windows closed. The cabinet may become deformed and
deterioration of the performance may result.
* Since a strong magnet is used for the speaker, keep magnetized commuter passes, tickets or personal
credit cards, recorded tapes, watches etc. away from the radio. The speaker magnet in the radio may
damage them.
* Do not place the set near strong magnets such as those used in radio, television sets, speaker boxes etc.
as these may cause the frequency to drift.
* Do not drop or give the set a strong impact since the set is composed of precise parts.
* When listening in a train car or building, use the radio near a windows to obtain the best possible
reception.Receptionmaybedifcultinatunnelorsubway.Alsonotethatoperatingtheradioonametal
object may adversely affect reception.
* Do not use benzene thinner or any abrasive powder to clean the cabinet, wipe it with a soft cloth
moistened with a mild soap and water solution.
* Avoid spray-type insecticides, some insecticides contain chemicals that could cause cabinet deformation.

Specyfikacje produktu

Marka: HQ
Kategoria: radio
Model: TORCH-EMC-02

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z HQ TORCH-EMC-02, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje radio HQ

HQ

HQ TORCH-EMC-01 Instrukcja

29 Września 2024
HQ

HQ TORCH-EMC-02 Instrukcja

14 Sierpnia 2024

Instrukcje radio

Najnowsze instrukcje dla radio

Uniden

Uniden X70 Instrukcja

13 Stycznia 2025
Thomson

Thomson WKR60BT Instrukcja

13 Stycznia 2025
MB Quart

MB Quart GMR7V1.2 Instrukcja

13 Stycznia 2025
Roadstar

Roadstar HIF-1899TUMPK Instrukcja

12 Stycznia 2025
Tivoli Audio

Tivoli Audio Albergo Instrukcja

12 Stycznia 2025
Furrion

Furrion DV1230-BL Instrukcja

11 Stycznia 2025
Hyundai

Hyundai TRC 533 AU3BS Instrukcja

11 Stycznia 2025
Kenwood

Kenwood CR-ST90S Instrukcja

10 Stycznia 2025
Yamazen

Yamazen JYTM-RTV430 Instrukcja

7 Stycznia 2025
Sven

Sven SRP-50 Instrukcja

7 Stycznia 2025