Instrukcja obsługi HQ Power Copernicus II

HQ Power Maszyna efektów Copernicus II

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla HQ Power Copernicus II (32 stron) w kategorii Maszyna efektów. Ta instrukcja była pomocna dla 3 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/32

VDPL300MF4

COPERNICUS II - LED MOONFLOWER - DMX-CONTROLLED - 469 LEDs

COPERNICUS II - LEDMOONFLOWER - DMX-GESTUURD - 469 LEDS

COPERNICUS II - MOONFLOWER À LED - PILOTAGE DMX - 469 LED

COPERNICUS II - LED MOONFLOWER - CONTROLADO POR LA MÚSICA - 469 LEDs

COPERNICUS II - LED MOONFLOWER - DMX-GESTEUERT - 469 LEDs

USER MANUAL

GEBRUIKERSHANDLEIDING

NOTICE D’EMPLOI

MANUAL DEL USUARIO

BEDIENUNGSANLEITUNG

VDPL300MF4_v3 HQPOWER™

VDPL300MF4

COPERNICUS II - LED MOONFLOWER - DMX-CONTROLLED - 469 LEDs

1. Introduction

To all residents of the European Union

Important environmental information about this product

This symbol on the device or the package indicates that disposal of the device after its lifecycle could harm

the environment. Do not dispose of the unit (or batteries) as unsorted municipal waste; it should be taken to

a specialized company for recycling. This device should be returned to your distributor or to a local recycling

service. Respect the local environmental rules.

If in doubt, contact your local waste disposal authorities.

Thank you for choosing HQPOWER! The COPERNICUS II is a powerful RGB LED moonflower with built-in programs.

Please read the manual thoroughly before bringing this device into service. If the device was damaged in transit, don't

install or use it and contact your dealer.

2. Safety Instructions

• Damage caused by disregard of certain guidelines in this manual is not covered by the warranty and the dealer

will not accept responsibility for any ensuing defects or problems.

• A qualified technician should install and service this device.

• Do not switch the device on immediately after it has been exposed to changes in temperature. Protect the device

against damage by leaving it switched off oom temperature. until it has reached r

• This device falls under protection class I. It is therefore essential that the device be earthed. Have a qualified

person carry out the electric connection.

• Make sure that the available voltage does not exceed the voltage stated in the specifications of this manual.

• Do not crimp the power cord and protect it against damage. Have an authorised dealer replace it if necessary.

• Disconnect the device from the mains to clean it or when it is not in use. Handle the power cord by the plug only.

• Do not look directly at the light source as sensitive people may go into epileptic seizure if they do.

• Keep the device away from splashing and dripping liquids. Never put objects filled with liquid on top of the device.

• Note that damage caused by user modifications to the device is not covered by the warranty.

• Mechanical wear is not covered by warranty.

• Keep the device away from children and unauthorised users.

3. General Guidelines

• This device is designed for professional use on stage, in discos, theatres, etc. The VDPL300MF4 should only be

used indoors and connected to an alternating current of max. 230VAC/50Hz.

• Lighting effects are not designed for permanent operation: regular operation breaks will prolong their lives.

• Do not shake the device. Avoid brute force when installing or operating the device.

• Select a location where the device is protected against extreme heat, dust and moisture.

• Use an appropriate safety cable to fix the device (e.g. VDLSC7 VDLSC8 or ).

• Familiarise yourself with the functions of the device before actually using it. Do not allow operation by unqualified

people. Any damage that may occur will most probably be due to unprofessional use of the device.

Be very careful during the installation: touching live wires can cause life-threatening electroshocks.

Keep this device away from rain and moisture.

Unplug the mains lead before opening the housing.

VDPL300MF4_v3 HQPOWER™

• Use the original packaging if the device is to be transported.

• All modifications of the device are forbidden for safety reasons.

• Only use the device for its intended purpose. All other uses may lead to short circuits, burns, electroshocks,

crash, etc. Using the device in an unauthorised way will void the warranty.

4. Description

1. DMX output

2. DMX input

3. power output

4. power input

5. sound sensitivity adjustment knob

6. microphone

7. DIP switches

5. Mounting the Device

• Have the device installed by a qualified person, respecting EN 60598-2-17 and all other applicable norms.

• The carrying construction must be able to support 10 times the weight of the device for 1 hour without deforming.

• The installation must always be secured with a secondary attachment e.g. a safety cable.

• Never stand directly below the device when it is being mounted, removed or serviced. Have a qualified technician

check the device once a year and once before you bring it into service.

• Install the device in a location with few passers-by that is inaccessible to unauthorised persons.

• Overhead mounting requires extensive experience: calculating workload limits, determining the installation

material to be used… Have the material and the device itself checked regularly. Do not attempt to install the

device yourself if you lack these qualifications as improper installation may result in injuries.

• Adjust the desired inclination and tighten the bracket screws. angle via the mounting bracket

• Make sure there is no flammable material within a 0.5m radius of the device.

• Have a qualified electrician carry out the electric connection.

• Connect the device to the mains with the power plug. Do not connect it to a dimming pack.

• The installation has to be approved by an expert before the device is taken into service.

6. Operation

• DIP Switch Setting

Specyfikacje produktu

Marka:	HQ Power
Kategoria:	Maszyna efektów
Model:	Copernicus II
Kolor produktu:	Czarny
Waga produktu:	7500 g
Ilość lamp:	469 lamp(y)
Napięcie:	230 V
Częstotliwość danych wejściowych:	50 Hz
Wymiary produktu (SxGxW):	320 x 350 x 256 mm