Instrukcja obsługi HP ipaq hw6515 gps

HP Przenośny ipaq hw6515 gps

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla HP ipaq hw6515 gps (213 stron) w kategorii Przenośny. Ta instrukcja była pomocna dla 4 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/213

User’s Guide

HP iPAQ hw6500 Mobile Messenger series

Sådan kommer du i gang

Aan de slag

Komme i gang

Aloitusopas

Komma igång

iPAQ is a trademark of Hewlett-Packard Development Company, L.P. in the U.S.

and other countries.

Microsoft, Windows, the Windows logo, Outlook, and ActiveSync are trademarks

of Microsoft Corporation in the U.S. and other countries.

HP iPAQ hw6500 Mobile Messenger series is Powered by Windows Mobile™

2003 Second Edition software for Pocket PC.

SD Logo is a trademark of Secure Digital.

Bluetooth is a trademark owned by its proprietor and used by Hewlett-Packard

Company under license.

Hewlett-Packard Company shall not be liable for technical or editorial errors or

omissions contained herein or for incidental or consequential damages in

connection with the furnishing, performance, or use of this material. The information

in this document is provided “as is” without warranty of any kind, including, but not

limited to, the implied warranties of merchantability and fitness for a particular

purpose, and is subject to change without notice. The warranties for HP products

are set forth in the express limited warranty statements accompanying such

products. Nothing herein should be construed as constituting an

additional warranty.

This document contains proprietary information that is protected by copyright. No

part of this document may be photocopied, reproduced, or translated to another

language without the prior written consent of Hewlett-Packard Company.

WARNING! Text set off in this manner indicates that failure to follow

directions could result in bodily harm or loss of life.

CAUTION: Alerts the user that failure to follow a procedure exactly as

described can result in either loss of data or damage to hardware

or software.

User’s Guide

HP iPAQ hw6500 Mobile Messenger series

First Edition (June 2005)

Document Part Number: 378871-001

iii

1 Getting to Know Your

HP iPAQ Mobile Messenger

Using the Stylus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1–3

Setting the Date and Time . . . . . . . . . . . . . . . . . . . . . . . . . . . 1–4

Setting the Time for Home and Locations You Are Visiting. . . 1–4

Setting the Date. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1–4

Entering Owner Information. . . . . . . . . . . . . . . . . . . . . . . . . . 1–5

Setting a Password . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1–5

Resetting the Unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1–6

Performing a Soft Reset. . . . . . . . . . . . . . . . . . . . . . . . . . . 1–6

Performing a Hard Reset. . . . . . . . . . . . . . . . . . . . . . . . . . 1–7

Aligning the Screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1–7

Routine Care . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1–8

Protecting the Screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1–8

Traveling with Your HP iPAQ . . . . . . . . . . . . . . . . . . . . . . . . . 1–9

2 Learning the Basics

Using the Today Screen. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2–1

Navigation Bar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2–2

Command Bar. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2–2

TodayPanel. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2–2

Status Icons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2–3

Pop-Up Menus. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2–5

Creating information . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2–5

Customizing the Today Screen . . . . . . . . . . . . . . . . . . . . . 2–6

Customizing the Application Buttons . . . . . . . . . . . . . . . . . 2–7

Locking the Application Buttons . . . . . . . . . . . . . . . . . . . . . 2–7

Using Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2–8

Opening Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . 2–8

Using the ContextMenu Key . . . . . . . . . . . . . . . . . . . . . . . 2–8

Minimizing Applications. . . . . . . . . . . . . . . . . . . . . . . . . . 2–8

Closing Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2–8

Installing Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . 2–9

Backing Up Information . . . . . . . . . . . . . . . . . . . . . . . . . . 2–9

Using iPAQ File Store Folder. . . . . . . . . . . . . . . . . . . . . . 2–11

Contents

Switching a Profile. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5–9

Making and Receiving Phone Calls. . . . . . . . . . . . . . . . . . . . . 5–9

Making a Call. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5–10

Answering a Call. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5–10

Ending a Call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5–10

Making a Call from Contacts . . . . . . . . . . . . . . . . . . . . . 5–10

Making a Call Using Speed Dial . . . . . . . . . . . . . . . . . . . 5–11

Making a Call From Call History . . . . . . . . . . . . . . . . . . . 5–12

Making a Conference Call . . . . . . . . . . . . . . . . . . . . . . . 5–12

Adjusting Phone Volume. . . . . . . . . . . . . . . . . . . . . . . . . 5–12

Enabling the Mute Function. . . . . . . . . . . . . . . . . . . . . . . 5–12

Setting Ring Tones . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5–12

Enabling Speakerphone Mode . . . . . . . . . . . . . . . . . . . . 5–13

Taking Notes During a Call . . . . . . . . . . . . . . . . . . . . . . 5–14

Using Voicemail . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5–14

Putting a Call on Hold . . . . . . . . . . . . . . . . . . . . . . . . . . 5–14

Using Call Waiting . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5–14

Displaying Caller ID. . . . . . . . . . . . . . . . . . . . . . . . . . . . 5–15

Blocking Calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5–15

Forwarding Calls. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5–15

Changing the System Volume . . . . . . . . . . . . . . . . . . . . . 5–16

Change the Ringer Volume . . . . . . . . . . . . . . . . . . . . . . . 5–16

Changing the Phone Settings . . . . . . . . . . . . . . . . . . . . . . . . 5–16

Changing Service Settings. . . . . . . . . . . . . . . . . . . . . . . . . . 5–17

Viewing Available GSM/GPRS/EDGE Networks . . . . . . . . . . 5–17

Using International Roaming . . . . . . . . . . . . . . . . . . . . . . . . 5–17

Changing Network Settings . . . . . . . . . . . . . . . . . . . . . . . . . 5–18

Manually Selecting a Network . . . . . . . . . . . . . . . . . . . . 5–18

Configuring Your HP iPAQ for Your SIM Card . . . . . . . . . . . . 5–19

Modifying the GSM/GPRS Network Settings . . . . . . . . . . . . . 5–19

Editing Network Properties . . . . . . . . . . . . . . . . . . . . . . . 5–20

Creating a New Connection . . . . . . . . . . . . . . . . . . . . . . 5–22

Failed Automatic SIM Detection . . . . . . . . . . . . . . . . . . . . . . 5–23

TTY Functionality for the Hearing-Impaired. . . . . . . . . . . . . . . 5–23

6 Managing Multiple Wireless Connections

Using the iPAQ Wireless Manager . . . . . . . . . . . . . . . . . . . . . 6–1

Power Buttons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6–2

Settings Buttons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6–2

Managing Data Connections . . . . . . . . . . . . . . . . . . . . . . 6–3

7 Making Data Connections

Impact of Data Connection When a

Phone Call is Received . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7–2

Using GSM/GPRS/EDGE Connections . . . . . . . . . . . . . . . . . . 7–2

Creating a GPRS/EDGE Connection . . . . . . . . . . . . . . . . . 7–2

Setting Up a WAP Browser . . . . . . . . . . . . . . . . . . . . . . . . . . 7–3

Viewing WAP Pages . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7–3

Connecting to a Private Network . . . . . . . . . . . . . . . . . . . . . . 7–4

Setting Up VPN Server Connections . . . . . . . . . . . . . . . . . . 7–4

Setting Up Proxy Server Settings . . . . . . . . . . . . . . . . . . . . 7–4

Managing Your E-mail . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7–5

Entering an Internet Address . . . . . . . . . . . . . . . . . . . . . . . . . 7–5

Using a Favorites List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7–6

8Using GPS Navigation

Getting Acquainted . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8–1

Setting Up Your HP iPAQ . . . . . . . . . . . . . . . . . . . . . . . . . . . 8–1

Setting Up Internet Access on Your HP iPAQ . . . . . . . . . . . . 8–1

Using HP iPAQ Quick GPS Connection Utility . . . . . . . . . . . . . 8–1

Downloading the Quick GPS Connection Data File. . . . . . . . . . 8–3

9Using Bluetooth

Getting Acquainted with Bluetooth . . . . . . . . . . . . . . . . . . . . . 9–1

Understanding Terms . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9–2

Supported Services . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9–2

Working with Bluetooth Settings . . . . . . . . . . . . . . . . . . . . . . . 9–3

Turning On Bluetooth . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9–3

Opening Bluetooth Settings. . . . . . . . . . . . . . . . . . . . . . . . 9–3

Setting Accessibility Properties. . . . . . . . . . . . . . . . . . . . . . 9–4

Enabling Bluetooth Services . . . . . . . . . . . . . . . . . . . . . . . 9–4

Setting a Shared Folder . . . . . . . . . . . . . . . . . . . . . . . . . . 9–6

Understanding Profiles . . . . . . . . . . . . . . . . . . . . . . . . . . . 9–6

Working with Bluetooth Manager. . . . . . . . . . . . . . . . . . . . . . 9–8

Opening Bluetooth Manager. . . . . . . . . . . . . . . . . . . . . . . 9–8

Locating and Selecting a Device . . . . . . . . . . . . . . . . . . . . 9–8

Connecting to Other Devices . . . . . . . . . . . . . . . . . . . . . . . . . 9–9

Identifying the Communications Port. . . . . . . . . . . . . . . . . . 9–9

Establishing a Headset Connection . . . . . . . . . . . . . . . . . 9–10

Establishing a Headphone or Stereo Speakers

Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9–10

Establishing an ActiveSync Connection. . . . . . . . . . . . . . . 9–10

Establishing a Serial Connection . . . . . . . . . . . . . . . . . . . 9–13

Dial-Up Networking Service . . . . . . . . . . . . . . . . . . . . . . 9–13

Using Dial-Up Networking Service . . . . . . . . . . . . . . . . . . 9–13

Joining a Personal Area Network . . . . . . . . . . . . . . . . . . 9–14

vii

Working with Files . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9–14

Creating a File Transfer Connection . . . . . . . . . . . . . . . . . 9–15

Sending Files . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9–15

Creating a Folder on a Remote Device . . . . . . . . . . . . . . . 9–15

Receiving a File from a Remote Device . . . . . . . . . . . . . . . 9–15

Deleting a File from a Remote Device. . . . . . . . . . . . . . . . 9–15

Using Business Card Exchange . . . . . . . . . . . . . . . . . . . . 9–16

Setting Up Your Business Card Information . . . . . . . . . . . . 9–16

Opening a Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9–17

Viewing Connection Status . . . . . . . . . . . . . . . . . . . . . . . 9–18

Closing a Connection. . . . . . . . . . . . . . . . . . . . . . . . . . . 9–18

Viewing Connection Information . . . . . . . . . . . . . . . . . . . 9–18

Working with Connections . . . . . . . . . . . . . . . . . . . . . . . 9–18

10Using the Camera Features

Camera Components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10–2

Taking a Photo. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10–3

Ending Your Photo Session . . . . . . . . . . . . . . . . . . . . . . . . . 10–5

Taking a Video Clip . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10–5

Adjusting the Camera Settings . . . . . . . . . . . . . . . . . . . . . . . 10–5

White Balance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10–6

Color . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10–6

Compression. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10–6

Resolution . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10–6

Flicker Filter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10–7

Setting Up Other Features . . . . . . . . . . . . . . . . . . . . . . . . . . 10–7

Camera Sounds. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10–7

Configuring Instant Review . . . . . . . . . . . . . . . . . . . . . . . 10–7

Using the Self-Timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10–7

Configuring File Settings. . . . . . . . . . . . . . . . . . . . . . . . . 10–8

Configuring Video Format. . . . . . . . . . . . . . . . . . . . . . . . 10–8

Using HP Image Zone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10–9

Viewing Thumbnail Photos . . . . . . . . . . . . . . . . . . . . . . 10–10

Viewing a Photo Full-Screen . . . . . . . . . . . . . . . . . . . . . 10–10

Recording Sound With a Picture . . . . . . . . . . . . . . . . . . 10–10

Viewing a Slideshow . . . . . . . . . . . . . . . . . . . . . . . . . . 10–11

E-mailing a Picture . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10–12

Exiting HP Image Zone. . . . . . . . . . . . . . . . . . . . . . . . . 10–13

HP Image Transfer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10–13

Tips for Taking Better Pictures. . . . . . . . . . . . . . . . . . . . . . . 10–15

11Expansion Cards

Installing a Secure Digital (SD) Expansion Card . . . . . . . . . . . 11–2

Removing a Secure Digital (SD) Expansion Card . . . . . . . . . . 11–3

viii

Viewing the Content of Memory Cards . . . . . . . . . . . . . . . . . 11–3

12Using Messaging

Understanding Messaging. . . . . . . . . . . . . . . . . . . . . . . . . . 12–1

Using Folders . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12–1

Synchronizing Inbox . . . . . . . . . . . . . . . . . . . . . . . . . . . 12–2

Setting Up Messaging Accounts . . . . . . . . . . . . . . . . . . . . . . 12–3

Internet E-mail . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12–3

Text Messaging . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12–6

Multimedia Messaging Service (MMS) . . . . . . . . . . . . . . . 12–7

Using Messaging . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12–7

Composing and Sending Messages . . . . . . . . . . . . . . . . . 12–7

Replying to or Forwarding a Message . . . . . . . . . . . . . . . 12–8

Sending Text Messages . . . . . . . . . . . . . . . . . . . . . . . . . 12–8

Receiving Text Messages . . . . . . . . . . . . . . . . . . . . . . . . 12–8

Sending MMS Messages . . . . . . . . . . . . . . . . . . . . . . . . 12–9

Viewing MMS Messages . . . . . . . . . . . . . . . . . . . . . . . 12–11

Downloading Messages . . . . . . . . . . . . . . . . . . . . . . . . 12–11

Downloading Messages From a Server . . . . . . . . . . . . . 12–11

13Managing the Battery

Inserting the Battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13–2

Removing the Battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13–3

Charging the Battery. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13–4

Charging with the AC Adapter . . . . . . . . . . . . . . . . . . . . 13–5

Charging with the HP iPAQ Cradle and AC Adapter . . . . . 13–6

Charging Over a USB Connection. . . . . . . . . . . . . . . . . . 13–6

Changing the Backlight Settings . . . . . . . . . . . . . . . . . . . 13–7

Disabling the Application Buttons. . . . . . . . . . . . . . . . . . . 13–8

Maximizing Battery Life and Checking Battery Charge Levels. . 13–8

Checking Your Battery . . . . . . . . . . . . . . . . . . . . . . . . . . 13–9

14Troubleshooting

Self-Test Diagnostics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14–1

Common Problems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14–1

ActiveSync. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14–5

Phone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14–7

Expansion Cards . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14–8

Bluetooth . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14–9

A Regulatory Notices

Federal Communications Commission Notice. . . . . . . . . . . . . . A–1

Declaration of Conformity for products marked with the

FCC logo—United States only . . . . . . . . . . . . . . . . . . . . . . A–1

Canadian Notice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A–2

Avis Canadien . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A–2

European Union Regulatory Notice. . . . . . . . . . . . . . . . . . . . . A–2

Notice for Italy for use of

2.4 GHz wireless communication: . . . . . . . . . . . . . . . . . . . A–3

Battery Warning. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A–3

Equipment Warning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A–3

Airline Travel Notice. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A–3

Medical Electronic Equipment . . . . . . . . . . . . . . . . . . . . . . . . A–4

Wireless Notices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A–4

U.S. Regulatory Wireless Notice . . . . . . . . . . . . . . . . . . . . A–4

Health and Safety Information . . . . . . . . . . . . . . . . . . . . . . A–4

Canadian Regulatory Wireless Notice . . . . . . . . . . . . . . . . A–5

Australian Wireless Notice . . . . . . . . . . . . . . . . . . . . . . . . A–5

Brazilian Regulatory Wireless Notice . . . . . . . . . . . . . . . . . A–5

Singaporean Wireless Notice . . . . . . . . . . . . . . . . . . . . . . A–5

Taiwanese Wireless Notice. . . . . . . . . . . . . . . . . . . . . . . . A–6

B Environmental Notices

Battery Warning. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B–1

Taiwan Battery Recycling Notice . . . . . . . . . . . . . . . . . . . . B–1

Disposal of Waste Equipment by Users in Private

Household in the European Union . . . . . . . . . . . . . . . . . . . . . B–1

Likvidace zaøízení soukromými domácími uživateli v

Evropské unii . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B–1

Bortskaffelse af brugt udstyr hos brugere i private hjem i EU . . . B–2

Seadmete jäätmete kõrvaldamine eramajapidamistes

Euroopa Liidus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B–2

Laitteiden hävittäminen kotitalouksissa Euroopan

unionin alueella . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B–2

Élimination des appareils mis au rebut par les ménages

dans l'Union européenne. . . . . . . . . . . . . . . . . . . . . . . . . . . . B–3

Entsorgung von Altgeräten aus privaten Haushalten in

der EU . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B–3

  μ    

   . . . . . . . . . . . . . . . . . . . . . B–3

Készülékek magánháztartásban történõ selejtezése

az Európai Unió területén . . . . . . . . . . . . . . . . . . . . . . . . . . . B–4

Smaltimento delle apparecchiature da parte di privati nel

territorio dell'Unione Europea . . . . . . . . . . . . . . . . . . . . . . . . B–4

Vartotoj iš privači nam ki rangos atliek šalinimas

Europos Sjungoje . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B–4

Nolietotu iekârtu iznîcinâðanas noteikumi lietotâjiem Eiropas

Savienîbas privâtajâs mâjsaimniecîbâs . . . . . . . . . . . . . . . . . . B–5

Verwijdering van afgedankte apparatuur door privé-

gebruikers in de Europese Unie . . . . . . . . . . . . . . . . . . . . . . . B–5

Eliminering av utstyr i privathusholdningen i Den

europeiske unions medlemsland . . . . . . . . . . . . . . . . . . . . . . . B–5

Pozbywanie si zuytego sprztu przez uytkowników

w prywatnych gospodarstwach domowych w Unii Europejskiej

. . B–6

Destruição, por Utilizadores na União Europeia, de

Equipamento Usado no Lixo Doméstico. . . . . . . . . . . . . . . . . . B–6

Bortskaffande av avfallsprodukter från användare i

privathushåll inom Europeiska Unionen . . . . . . . . . . . . . . . . . . B–6

Odstranjevanje odslužene opreme uporabnikov v zasebnih

gospodinjstvih v Evropski uniji . . . . . . . . . . . . . . . . . . . . . . . . B–7

Likvidácia vyradených zariadení v domácnostiach v

Európskej únii . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B–7

Eliminación de residuos de equipos eléctricos y electrónicos

por parte de usuarios particulares en la Unión Europea . . . . . . B–7

C Specifications

System Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C–1

Physical Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C–3

Operating Environment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C–4

Getting to Know Your HP iPAQ Mobile Messenger 1–2

iPAQ Backup From the Start menu, tap

Programs > iPAQ

Backup.

Back up your data to protect it

from loss due to a drained

battery, accidental deletion, or

hardware failure.

iPAQ Wireless From the Today screen, tap

the Wireless icon in the

bottom right of the screen.

Provides a centralized control to

wireless features on your

HP iPAQ. It allows you to turn all

wireless features on and off and

configure settings for phone and

data functions using GSM/

GPRS/EDGE and Bluetooth.

Self-Test From the Start menu, tap

Settings > System tab >

Self Test.

Run a basic diagnostic test on

the device.

Microsoft Pocket PC

Software

Functions

ActiveSync Synchronize information between your HP iPAQ and personal

computer so you have the latest information in both locations.

Be sure you install ActiveSync on your personal computer

before connecting the cradle and HP iPAQ to your computer.

Calculator Perform calculations.

Calendar Schedule appointments, meetings, and other events, and set an

alarm to remind you of the appointments. Appointments for the

day are displayed on the Today screen.

Connections Connect your HP iPAQ to the Internet and intranet to browse

Web sites, send and receive e-mail, and synchronize

information using ActiveSync.

Contacts Keep an updated list of friends and colleagues to

e-mail, message, and telephone.

Inbox Receive and send Internet e-mail, Text and MMS messages

in Inbox on your HP iPAQ or from your computer if ActiveSync

is installed or if synchronizing with Exchange ActiveSync over

the air. You must have an e-mail address provided by your

Internet Service Provider (ISP) or employer to send and

receive e-mail.

Notes Create handwritten or typed notes, drawings, and recordings.

Pocket Excel Create and edit workbooks or view and edit Excel workbooks

created on your computer.

Pocket Internet Explorer Browse the Internet and download pages through

synchronization or by connecting to the Internet.

Pocket Word Create new documents or view and edit Word documents

created on your computer.

Ring Tones Select different sounds to notify you of incoming calls.

HP iPAQ Software To Access Functions

(continued)

Getting to Know Your HP iPAQ Mobile Messenger 1–3

Using the Stylus

Your HP iPAQ comes with a stylus that you should use to tap or write on

your screen.

NOTE: Use the stylus to tap and write on the screen, and use your fingers

to press the Power button, application buttons on the bottom of the

device, and the camera’s on-screen shutter button.

CAUTION: To prevent damage to your HP iPAQ screen, never use

any device other than the stylus that comes with the HP iPAQ or an

approved replacement to tap or write on the screen. If you lose or break

your stylus, you can order extras at www.hp.com/go/ipaqaccessories.

You can perform three basic actions using the stylus:

Tap—Lightly touch the screen to select or open an item. Lift the stylus after

you tap an item. Tapping is equivalent to clicking an item with the mouse

on your computer.

Settings Obtain quick access to settings for the backlight, clock,

memory, power, regional settings, Today screen, password,

sounds and notifications, etc.

Tasks Keep track of your to-do list.

Terminal Services Client Log onto your computer and use all the programs available on

that computer from your HP iPAQ (Windows 2000 and XP

or later).

Windows Media Player

10 Mobile Play digital audio and video files in Windows Media or MP3

format on your device.

Microsoft Pocket PC

Software

Functions

(continued)

Getting to Know Your HP iPAQ Mobile Messenger 1–4

Drag—Place the point of the stylus on the screen and drag an item across

the screen without lifting the stylus until you have completed the selection.

Dragging is equivalent to dragging with the left mouse button pressed on

your computer.

Tap and hold—Hold the stylus pointer on an item for a short time until

a menu displays. Tapping and holding is equivalent to right-clicking your

computer mouse button. When you tap and hold, a circle of blue dots

appears around the stylus to indicate that the menu will soon pop up.

Setting the Date and Time

When you turn on your HP iPAQ for the first time, you are requested to

select your time zone. After setting the time zone, you still need to set the

time and date on your unit. Tap the Clock icon on the Today screen

to set the time and date. All three settings are located in the Clock Settings

screen and can be set at the same time.

NOTE: By default, the time on the HP iPAQ is synchronized with your

computer each time the two devices connect using ActiveSync.

Setting the Time for Home and Locations You Are Visiting

From the Start menu, tap Settings > System tab > Clock &

Alarms icon.

SHORTCUT: From the Today screen, tap the Clock icon to set

the time.

1. Tap either Home or Visiting.

2. Tap the time-zone down arrow, and select the appropriate

time zone.

3. Tap the hour, minutes, or seconds, and use the up and down arrows

to adjust the time.

SHORTCUT: You can also adjust the time by moving the hands of the

clock with the stylus.

4. Tap AM or PM.

5. Tap OK.

6. Tap Yes to save the time.

Setting the Date

1. From the Start menu, tap Settings > System tab > Clock &

Alarms icon.

SHORTCUT: From the Today screen, tap the Clock icon to set

the date.

2. Tap the down arrow by the date.

Getting to Know Your HP iPAQ Mobile Messenger 1–6

3. In the Password Type box, tap the down arrow to display the drop-

down box and select either Simple 4 digit or Strong

alphanumeric as the password type you want to use.

4. Enter your password in the Password box using the screen keyboard

and tap OK.

NOTE: Keep a record of your password in a safe place in case you forget

it. If you are unable to retrieve your password, you must perform a hard

reset on your HP iPAQ and will lose settings and information that are not

saved in ROM. See ”Performing a Hard Reset” for more information.

Resetting the Unit

Performing a Soft Reset

A soft reset (also known as a normal reset) stops all running applications,

but does not erase any programs or saved data.

CAUTION: Be sure to save any unsaved data before performing a soft

reset since a soft reset erases all unsaved data.

To perform a soft reset:

1. Locate the recessed Reset button on the bottom of the device to the

right of the communications port.

2. Use the stylus to lightly press the Reset button until the

screen fades.

3. Remove the stylus to restart the HP iPAQ.

The HP iPAQ restarts and displays the Today screen.

Getting to Know Your HP iPAQ Mobile Messenger 1–7

Performing a Hard Reset

Perform a hard reset (also known as a full reset) when you want to clear

all settings, programs, and data from RAM.

CAUTION: If you perform a hard reset, your HP iPAQ returns to its default

settings and loses all information that is not recorded in ROM or

iPAQ File Store.

To perform a hard reset:

1. Press and hold down the Power button.

2. While holding the Power button, use the stylus to lightly press the

recessed Reset button on the bottom of the HP iPAQ for about

five seconds.

3. The HP iPAQ screen fades and the device resets. Once the device

resets and the screen comes back on, release the Power button

and remove the stylus from the Reset button.

Aligning the Screen

When the HP iPAQ is turned on for the first time, you are guided through

a screen alignment process. You must realign your screen if:

•The HP iPAQ does not respond accurately to your taps.

•You perform a hard reset of your HP iPAQ.

To realign the HP iPAQ screen:

1. From the Start menu, tap Settings > System tab >

Screen icon.

2. Tap the Align Screen button.

Getting to Know Your HP iPAQ Mobile Messenger 1–8

SHORTCUT: To access the Align Screen application without tapping on

the screen, push down and hold the 5-Way Navigation button and the

Contacts application button located to the left of the Navigation button.

3. Tap the cross-hair object at each location. Be precise when tapping

the cross-hair object.

4. Tap OK.

Routine Care

To keep your HP iPAQ in good condition and working properly, follow

these guidelines:

•Keep your HP iPAQ away from excessive moisture and

temperature extremes.

•Do not expose your HP iPAQ to liquids or precipitation.

•Avoid exposing your HP iPAQ to direct sunlight or strong ultraviolet

light for extended periods of time.

•When not in use, store your HP iPAQ in a case. You can select from

a wide variety of case options at

www.hp.com/go/ipaqaccessories.

Protecting the Screen

CAUTION: The screen and camera lens of your HP iPAQ is made of glass

and can be damaged or broken by drops, impacts, or pressure.

NOTE: HP is not responsible for damage that occurs as a result of your

failure to follow the instructions that came with the HP branded product.

Refer to the warranty document included with your HP iPAQ for

more information.

You should observe the following practices to protect the screen and

camera lens of your HP iPAQ from damage.

•When transporting your HP iPAQ in a purse, pocket, briefcase, etc.,

ensure the device does not get compressed, bent, dropped, hit, or

sat on.

•When not in use, close the flip cover on your HP iPAQ and store it

in a case. You can select from a wide variety of case options at

www.hp.com/go/ipaqaccessories.

•Do not place anything on top of your HP iPAQ to prevent damage

to the screen.

•Avoid exposing your HP iPAQ to direct sunlight or strong ultraviolet

light for extended periods of time.

•Avoid scratching the surface of the screen and the camera lens and

banging them against hard objects.

Getting to Know Your HP iPAQ Mobile Messenger 1–9

•Use only the stylus that comes with your HP iPAQ or an approved

replacement on the screen to prevent scratching it. If you lose or

break your stylus, you can order extras at www.hp.com/go/

ipaqaccessories.

•Clean your HP iPAQ by wiping the screen, the camera lens, a nd

the exterior with a soft, damp cloth lightly moistened only

with water.

CAUTION: To reduce the risk of damage to the internal components, do

not spray liquid directly on the screen, or allow excess liquid to drip

inside your HP iPAQ. Using soap or other cleaning products on the

screen may discolor the finish and damage it.

Traveling with Your HP iPAQ

Use the following guidelines when traveling with your HP iPAQ:

•Back up your information.

•Take a copy of your backup with you on an SD memory card.

•Disconnect all external devices.

•Take the AC Adapter and AC Charger Adapter with you.

•Keep your HP iPAQ in a protective case and keep it in your

carry-on luggage.

•For air travel, be sure to turn off the Phone and Bluetooth. To turn off

all wireless features, from the Today screen, tap the iPAQ

Wireless icon in the Command bar, then tap the ALL OFF button

on the iPAQ Wireless screen to turn off all wireless features.

•If you are traveling internationally, be sure you have the plug

adapter appropriate for the country you are visiting.

NOTE: If you are planning on traveling abroad with your HP iPAQ, you

may need to set up your phone features for international calling. For this

purpose, refer to the information in Chapter 5, in the section “Using

International Roaming.”

Learning the Basics 2–1

2Learning the Basics

Using the Today Screen

When you first turn on your HP iPAQ, the Today screen displays. Also you

can display it by tapping Start > Today. Use the Today screen to view:

•Date and time

•Owner information

•Upcoming appointments

•Unread and unsent messages

•Tasks that need to be completed

Tap to change volume or mute all sounds.

Tap to change Phone settings.

Tap to change date and time.

Tap to set appointment or

view existing appointments.

Tap to read e-mail.

Tap to create a new item.

Tap to view or create tasks.

Tap to launch the iPAQ

Wireless screen.

Tap to set Wireless connections.

Tap to set owner information.

TodayPanel

Indicates HP iPAQ is connected

Start Menu

to your personal computer.

Learning the Basics 2–3

•Storage card settings—Tap to view memory available for

iPAQ File Store folder.

•Backlight settings—Tap to adjust backlight settings.

When you first power on your HP iPAQ, the TodayPanel is set to display

on the Today screen. To turn it off:

1. In the TodayPanel, tap the Options and Today Settings icon >

Today Settings.

2. On the Today Settings screen, scroll down and uncheck the

TodayPanel box.

3. Tap OK to close the program.

NOTE: To turn on the TodayPanel again, tap Start > Settings >

Today icon > Items tab. On the Today Settings screen, scroll down and

place a checkmark in the TodayPanel box.

Status Icons

You may see the following status icons displayed on the Navigation or

Command bar. Tap the icon on the screen to view more information

related to the item.

Backlight settings

Storage card settings

Memory allocation settings

Options and Today settings

Battery power settings

Icon Definition

Active connection to computer or wireless network.

Inactive connection to computer or wireless network.

Microsoft ActiveSync is synchronizing.

Speaker is on.

Speaker is off or in mute position.

GPRS service is registered and available if you are subscribed to the

GPRS service.

Learning the Basics 2–4

Icon Definition

(continued)

Active data connection to GPRS network.

Phone is powered off.

Phone is powered on.

Network is searching or unavailable.

Phone connection unavailable or network error.

Signal strength indicator for phone functions.

A missed call. Tap this screen icon to view missed calls.

Call Forwarding Active.

Tap to mute your phone conversation. Tap it again to continue the

phone conversation.

One or more instant messages have been received. Tap this screen

icon to view the messages.

One or more e-mail/SMS/MMS, or voice messages have been

received. Tap this screen icon to view the messages.

Message Center indicates messages received from different

communication areas such as phone or voice messages, e-mail/

SMS/MMS, announcements, etc. Tap this screen icon to view all

messages in the message center.

Event notification set to vibrate instead of alarm. To set to vibrate:

Tap the Speaker icon in the Navigation bar and, in the pop-up

menu, tap Vibrate.

Battery power is low.

Battery power is very low.

Learning the Basics 2–5

Pop-Up Menus

Pop-up menus allow you to quickly perform an action. Use the pop-up

menu to cut, copy, rename, and delete an item, also send an e-mail or

send a file to another device.

To access a pop-up menu, tap and hold the stylus on the item on which

you want to perform the action. When the menu appears, tap the desired

action, or tap anywhere outside the menu to close it without performing

an action.

Creating information

From the Today screen, you can create new information, including:

•Appointments

•Contacts

•Excel Workbooks

•Messages

•Notes

•Tasks

•Word documents

1. Tap , or from the Start menu, tap Today > New.

2. Tap an option to create a new item.

Icon Definition

(continued)

Your HP iPAQ is connected to your personal computer. This icon

appears in the Command bar only when there is an

active connection.

iPAQ Wireless icon—Tap to launch the iPAQ Wireless screen. The

iPAQ Wireless screen provides a control center to turn all wireless

activities on and off, and to configure their settings. When this icon

displays with a red X, all wireless activities are off; when this icon

displays without the red X, one or more of the wireless activities

are on.

Tap and hold to display

the pop-up menu.

Tap the action you want.

Tap outside the menu to close

without performing an action.

Learning the Basics 2–7

7. Tap the down arrow in the check box next to Today timeout and

select the timeout period for the Today screen.

8. Tap OK.

Customizing the Application Buttons

You can change the Contacts and Messaging programs currently assigned

to two of the application buttons on the bottom of the HP iPAQ. You can

replace these assignments with two programs that you use the most.

NOTE: The Phone application buttons cannot be reassigned.

To change the Button assignment:

1. From the Start menu, tap Settings > Personal tab > Buttons.

2. Under Select a button: highlight the button to be changed, for

instance - Button 1.

3. Tap the down arrow in the Assign a program: box and select

your preferred program.

4. Tap OK.

Locking the Application Buttons

To prevent the application buttons on your HP iPAQ from accidentally

turning on and discharging the battery, the Buttons Settings include a Lock

feature and a Keyguard feature to disable the buttons.

Use the Lock feature to disable the buttons when the HP iPAQ is in standby:

1. From the Start menu, tap Settings > Personal tab > Buttons.

2. Tap the Lock tab.

3. Tap the check box next to Disable all buttons except

power button.

4. Tap OK.

NOTE: The next time your HP iPAQ is in standby, press one of the

application buttons to test this feature. With the Lock feature enabled,

your HP iPAQ will not power on until the Power button is pressed.

IMPORTANT: To make an emergency phone call while your HP iPAQ is in

standby with the Lock feature enabled, press the Power button > tap the

iPAQ Wireless icon > Phone button > Phone Keypad button, enter

your phone number, and tap Talk.

Use the Keyguard feature to disable the buttons when the HP iPAQ is

turned off:

1. From the Start menu, tap Settings > Personal tab > Buttons.

2. Tap the Lock tab.

3. Tap the check box next to Enable Keyguard.

Learning the Basics 2–8

4. Tap OK.

NOTE: The next time your HP iPAQ is powered off, press one of the

application buttons to test this feature. With the Keyguard feature

enabled, your HP iPAQ will not power on until you press the Contacts

button, and then the Messaging button on the Thumb Keyboard.

Using Applications

Opening Applications

Open any application on your HP iPAQ from the Start menu.

NOTE: You can also open an application by assigning it to one of the

two available Application Buttons. The Phone Application Buttons

cannot be reassigned. To assign the Application Buttons, from the

Today screen, tap Start > Settings > Buttons.

To open an application:

1. Tap Start > Programs.

2. Tap the desired application title or logo.

Using the ContextMenu Key

Press the ContextMenu key for quick access to a drop-down context menu

when you are using one of the following applications—Calendar, File

Explorer, Messaging, Pocket Word, Notes, and Tasks. The context menu

provides functions such as Copy, Cut, Delete, Select All, Send via

E-mail..., Beam File..., Rename/Move..., Send via Bluetooth..., or Set as

Ringtone. The menus are different in each application.

The ContextMenu key is the second key to the left of the space bar on the

Thumb Keyboard. To see an illustration of its location, refer to Chapter 4,

in the section “Keyboard Components.”

Minimizing Applications

To minimize an open application, tap the x at the top right of the screen.

Closing Applications

Applications automatically close based on available memory. However, if

your HP iPAQ is running slowly, you can close applications by manually

closing them.

1. From the Start menu, tap Settings > System tab > Memory >

Running Programs tab.

2. Tap Stop All or select a particular application, then tap Stop.

SHORTCUT: On the TodayPanel, tap the Memory icon > Running

Programs tab, select an application and tap Stop.

Learning the Basics 2–9

NOTE: To bring a currently running program to the foreground,

tap Activate.

Installing Applications

Install applications on your HP iPAQ from your:

•Computer by using Microsoft ActiveSync.

•Device if the application file has a .cab extension.

•Device or your computer by copying an application file that has an

.exe or .cef extension.

When installing applications, look for the correct version for your device

model or Windows Mobile™ 2003 Second Edition software for Pocket PC

Edition.

•Follow the instructions provided with the application and by the

Installation Wizard to install applications from your computer.

•Tap the application file in File Explorer on your HP iPAQ and follow

the instructions on the Installation Wizard to install applications on

your HP iPAQ.

Backing Up Information

Use iPAQ Backup or Microsoft ActiveSync Backup to back up and restore

information on your HP iPAQ.

NOTE: iPAQ Backup is already installed on the HP iPAQ. You must install

ActiveSync on your computer before using ActiveSync Backup.

To help reduce the chance of losing information, you should back up

information on a regular schedule.

Learning the Basics 2–10

Backup/Restore using iPAQ Backup

iPAQ Backup saves your data in a backup file. You may designate a file

name and a location for the file to be saved. iPAQ Backup backs up to a

memory card, main memory, or the iPAQ File Store folder. Close all

programs on your HP iPAQ before backing up or restoring

your information.

CAUTION: Restoring your information replaces the current information on

your HP iPAQ with the information saved in your backup.

If you perform a hard reset on your HP iPAQ, any user installed

information stored in main memory including backup files will be deleted.

For this reason, it is suggested that backup files always be saved to a

memory card or to the iPAQ File Store folder.

To backup/restore using iPAQ Backup:

1. From the Start menu, tap Programs > iPAQ Backup.

2. Tap Options > Switch to Advanced Mode and select the files

and folders to be backed up or restored.

3. Tap the ... box next to File to select the name, location, and folder

name for backed-up data.

4. Tap OK.

5. Press the Backup or Restore button, and press the Start button

on the next screen.

Backup/Restore Using ActiveSync

Close all programs on your HP iPAQ before backing up or restoring

your information.

CAUTION: Restoring your information replaces the current information on

your HP iPAQ with the information saved in your backup.

To backup/restore using ActiveSync:

1. Be sure the HP iPAQ is connected to your computer.

2. From your computer, open Microsoft ActiveSync. From the Start

menu, click Programs > Microsoft ActiveSync.

3. From the Tools menu in ActiveSync, click Backup/Restore.

4. Click the Backup or Restore tab, and select your options.

5. Click Backup Now or Restore Now.

Learning the Basics 2–11

Using iPAQ File Store Folder

You can install programs and save files to the iPAQ File Store folder, which

is accessed from File Explorer on your HP iPAQ.

Programs and files stored in iPAQ File Store are stored in ROM and are

saved if you perform a full reset of your HP iPAQ or if the battery

discharges completely.

To save to iPAQ File Store:

1. Copy the files to be saved to the iPAQ File Store folder.

2. From the Start menu, tap Programs > File Explorer >

My HP iPAQ > iPAQ File Store.

3. Tap Edit > Paste.

NOTE: Before saving files to the iPAQ File Store folder, it is a good idea

to determine how much memory is available in the folder. To view the

amount of memory, from the Start menu, tap Settings > System tab >

Memory > Storage Card tab, then select iPAQ File Store from the

drop-down menu.

Using ActiveSync 3–1

3Using ActiveSync

You can use Microsoft ActiveSync to:

•Synchronize information between your HP iPAQ model and up to

two computers or one server so that you have the latest information

in all locations.

•Change synchronization settings and the synchronization schedule.

•Copy files between your unit and computer.

•Install applications on your HP iPAQ.

•Back up and restore unit information.

•Synchronize links.

•Send and receive e-mail.

•Request meetings.

CAUTION: For synchronization to work properly, install Microsoft

ActiveSync on your computer before you connect your HP iPAQ to

your computer.

Connecting to a Computer

Connect your HP iPAQ to your computer using Microsoft ActiveSync and

the HP iPAQ Cradle, a wireless infrared connection, a Wi-Fi connection or

Bluetooth. For more information on using ActiveSync with Bluetooth, refer

to Chapter 9, “Using Bluetooth.”

NOTE: When using Microsoft ActiveSync to synchronize e-mail on your

computer with your HP iPAQ, you must have Microsoft Outlook 98 or

later installed on your personal computer. If you do not have Outlook,

install the Microsoft Outlook 2002 software from the Companion CD.

Microsoft Outlook Express will not work with the HP iPAQ

and ActiveSync.

Installing ActiveSync and Synchronizing with Your Computer

CAUTION: For synchronization to work properly, install Microsoft

ActiveSync version 3.8 or greater on your computer before you connect

your HP iPAQ to your personal computer. ActiveSync 3.7.1 can be used

with this product; however, earlier versions of ActiveSync will not work

with the HP iPAQ hw6500 Mobile Messenger series.

To install Microsoft ActiveSync on your personal computer:

1. Insert the Companion CD into the CD tray or slot on your computer.

2. When the CD displays on your computer screen, click on the Start

Here tab, then select the link to install Microsoft ActiveSync.

Using ActiveSync 3–2

NOTE: If the Companion CD does not automatically start on your

personal computer, you may need to manually start it by clicking on the

Microsoft Windows Start menu in the lower left corner of the monitor

screen, and then clicking on Run. In the Run dialog box, navigate to

your CD drive and double-click on SETUP.EXE to start the

Companion CD.

3. Install Microsoft Outlook 2002 from the Companion CD to your

personal computer, if you do not already have it installed.

NOTE: To synchronize Calendar, Tasks, Contacts, and E-mail with your

HP iPAQ, you must have Microsoft Outlook 98 or later installed on your

personal computer. Microsoft Outlook Express does not work with the

HP iPAQ and ActiveSync.

4. Install ActiveSync 3.8 from the Companion CD onto your personal

computer by following the instructions in the installation wizard. For

more help, click the ActiveSync Help button during installation.

5. After installing ActiveSync on your computer and, when prompted,

connect the HP iPAQ to the computer using the HP iPAQ Cradle.

a. Connect the USB connector on the cradle 1 to the USB port on

your computer.

b. Connect one end of the AC Adapter 2 to the cradle and

connect the other end to an electrical outlet to charge the unit.

c. Insert the HP iPAQ in the cradle 3.

6. Follow the on-screen ActiveSync instructions on your personal

computer to establish a connection between your HP iPAQ and

your personal computer.

Using ActiveSync 3–4

You can receive update notifications by means of the Always-up-to-date

(AUTD) feature in Exchange Server 2003. Up-to-date notifications

generated by Exchange Server 2003 initiate Exchange ActiveSync

synchronization between your HP iPAQ and your Exchange mailbox.

NOTE: To set up Exchange ActiveSync, you will first need to contact your

corporate IT team for the name of the corporate server with Exchange

Server 2003 installed.

To set up Exchange ActiveSync synchronization after you have the

server information:

1. On your personal computer, click the Microsoft ActiveSync

application in your system tray.

2. Click Options > Sync Options tab.

3. Under Server, click in the Enable Synchronization with a

Server box to enable it, then click Configure.

4. Place a checkmark in the boxes next to the features to be enabled

(Calendar, Contacts, Inbox).

5. Follow the on-screen instructions to set up Exchange ActiveSync.

NOTE: For more information, refer to the Microsoft Windows Mobile

Web site at www.microsoft.com/windowsmobile.

Using the Serial Infrared (IR) Connection

As an alternative to using the HP iPAQ Cradle or Exchange ActiveSync,

you can synchronize your HP iPAQ and your computer using an infrared

connection if you have an infrared port or an infrared USB adapter

installed on your computer. The infrared connection option works only on

computers that have Microsoft Windows 98SE, Me, 2000, or XP

operating systems installed.

To set up an infrared connection to a computer:

1. Synchronize your HP iPAQ with your computer using the HP iPAQ

Cradle before the first time you establish an ActiveSync connection

via infrared.

2. Follow your computer manufacturer’s instructions to install and set

up an infrared port.

3. Remove the HP iPAQ from the cradle and line up the infrared port

with the computer infrared port so they are unobstructed and within

30.5 cm (12 inches) of each other.

4. Initiate a connection by tapping Start > ActiveSync > Tools >

Connect via IR. Synchronization begins on your HP iPAQ.

5. To disconnect, move the devices away from each other or tap X in

the upper right of the screen to turn off.

Using ActiveSync 3–5

Changing Synchronization Settings

You can modify your synchronization settings for Microsoft ActiveSync to:

•Change when your HP iPAQ synchronizes with your computer

or server.

•Change the type of connection from your HP iPAQ to your

computer (for example, USB or infrared connections).

NOTE: The HP iPAQ hw6500 Mobile Messenger series does not support

synchronization with a personal computer using a serial cable.

•Select the files and information to synchronize with your computer.

•Select the files and information you do not want to synchronize with

your computer (for example, e-mail attachments).

•Determine how conflicts between information on your HP iPAQ and

information on your computer are handled.

To change synchronization settings:

1. From the Start menu on your computer, click Programs >

Microsoft ActiveSync > Tools > Options.

a. On the Sync Options tab, select the files and information to

synchronize with your computer.

b. On the Schedule tab, select when your HP iPAQ synchronizes

with your computer.

c. On the Rules tab, determine how conflicts between

information on your HP iPAQ and information on your

computer are handled.

2. Tap OK when you are finished.

3. From the File menu, click Connection Settings. Select the

type of connection to be allowed between the HP iPAQ and

the computer.

Copying Files

You can copy files to and from your computer using Explore in

ActiveSync and Windows Explorer.

To copy files:

1. Insert your HP iPAQ into the cradle.

2. From the Start menu on your computer, click Programs >

Microsoft ActiveSync.

3. Click Explore.

4. Double-click the My Pocket PC icon.

5. On your computer, right-click the Start menu, and select Explore.

6. Locate the file(s) to be moved.

NOTE: You cannot copy preinstalled files or system files.

Learning Input Methods 4–2

Keyboard Components

Using the Function and Shortcut Keys

The Thumb Keyboard keys perform additional functions when pressed in

the combinations indicated.

The Blue Key is a function (Fn) key on the left side of the keyboard. Blue

symbols used in conjunction with the Blue Key are located on the upper

left of the keys.

1Blue Key Use this function key in conjunction with Blue symbols

on the upper left of the keyboard keys to type

symbols and to type numbers on the numeric keypad.

2ContextMenu Key Press to display a drop-down context menu when

working within applications such as Calendar,

Messaging, Pocket Word, Notes, and Tasks.

3Start menu Key Press to display the Start menu.

Keystroke Combination Action

Blue Key + any key Enters characters printed on the upper

left of the key (indicated in blue).

Blue Key pressed twice Toggles on blue keys. Press Blue Key

once to toggle off.

Blue Key + down arrow Page down

Blue Key + up arrow Page up

Blue Key + left arrow Scrolls left

Learning Input Methods 4–3

“Sticky” Keys

The integrated keyboard uses a “Sticky Key” feature for the Shift and

Blue (Fn) keys (known as “key modifiers”). This means that when you

enter a number or symbol requiring a combination of keys to be pressed,

the key modifier will stay engaged until you press the second key. It is not

necessary to press both keys at the same time.

Special Keys

NOTE: To type a backslash (\) on the Thumb keyboard, first press the

Blue (Fn) Key + P to create a forward slash (/), then the Symbol/

Space Bar key to modify it as necessary. Refer to the following “Accent

Characters” section for more information on modifying characters.

Accent Characters

To type any of the accent characters, press the letter you require to be

accented, then press the Blue (Fn) Key and the Symbol/Space bar.

Continue pressing the Blue (Fn) Key and the Space bar until you reach the

desired special character. For example, if you press a, then the Blue Key

and the Symbol/Space Bar, the a will result in à. If you press the Blue

(Fn) Key and Space Bar again, the à will change to á. If you continue to

press the Blue (Fn) Key and the Space Bar, the accent mark over the a will

continue to change.

To type a capital letter with an accent, press and hold down the Shift key

and press the desired letter, then press the Blue (Fn) Key and the Space

Bar. For example, press Shift + a, then press the Blue (Fn) Key and

the Space Bar, the A will result in À.

Blue Key + right arrow Scrolls right

Blue Key + OK Closes program

Keystroke Combination Action

(continued)

Key Function Description

Function (Fn) key “Sticky Key” for invoking

alternate functions or symbols on

most keys.

Function (Fn) key

and space bar key

(English only)

Used for selecting alternate

characters and symbols to

replace a character.

Learning Input Methods 4–4

Refer to the following table for a list of special characters.

NOTE: It is recommended that you print this table for future reference.

Special Character Table

Original

Character

Modified Character

à á â ä å ą ã ă æ

Á Â Ä Å Ą Ã Ă Æ

ç ć č ©

Ç Ć Č ©

è é ê ë ę

È É Ê Ë Ę

ì í î ï

Ì Í Î Ï

ò ó ô õ ö ő ø œ

Ò Ó Ô Õ Ö Ő Ø Œ

þ ¶

Learning Input Methods 4–6

Using the On-Screen Keyboard

Use the stylus to tap letters, numbers, and symbols on the on-screen

keyboard to enter typed text directly onto the screen.

NOTE: A question mark within a program indicates a Help file. Tap

the ? to open the Help file.

1. From any application, tap the up arrow next to the

Input Panel icon.

2. Tap Keyboard to display a keyboard on the screen.

NOTE: To see symbols on the keyboard, tap the 123 or Shift key.

3. Tap a letter, symbol, or number to enter information.

4. Tap OK.

Writing with the Stylus and the Letter Recognizer

Use the stylus and Letter Recognizer to write letters, numbers, and symbols

on the screen. Create words and sentences by writing in uppercase (ABC),

lowercase (abc), and symbols (123) as instructed here.

To write with the stylus and Letter Recognizer:

1. From any application, tap the up arrow next to the

Input Panel icon.

2. Tap Letter Recognizer.

3. Write a letter or symbol between the dashed line and baseline.

a. To display in uppercase, write a letter between the hatch marks

labeled ABC.

b. To display in lowercase, write a letter between the hatch marks

labeled abc.

c. Write a number or draw a symbol between the hatch marks

labeled 123.

What you write will be converted to text.

Learning Input Methods 4–8

b. To type numbers or symbols, write a number or symbol between

the hatch marks labeled “123.”

What you write will be converted to text.

Drawing and Writing on the Screen

Use the stylus as a pen to draw and write on the screen in the Notes

program or from the Notes tab in Calendar, Contacts, or Tasks.

1. From the Start menu, tap Notes > New.

2. Draw and write on the screen.

3. Tap the Pen icon.

4. Tap OK.

Converting Writing to Text

You can convert your writing to text when you write with the stylus in the

Notes program or from the Notes tab in:

•Calendar

•Contacts

•Tasks

To convert writing to text:

1. From the Start menu, tap Notes.

NOTE: Otherwise, tap the Notes tab in Calendar, Contacts, or Tasks.

2. Tap a note to open it.

3. Tap Tools.

4. Tap Recognize.

NOTE: To convert a particular word or phrase, highlight it before you tap

Recognize. If a word is not recognized, it will not be converted.

5. Tap OK.

Learning Input Methods 4–9

Changing Word Suggestion Options

As you type or write, the HP iPAQ suggests words for you in a box above

the soft keyboard, Letter Recognizer, or Block Recognizer.

NOTE: This feature is unavailable when you use the Thumb Keyboard

or Transcriber.

You determine:

•If words are suggested.

•The number of letters you enter before a word is suggested.

•The number of words that are suggested per entry.

To change settings for word suggestions:

1. From the Start menu, tap Settings > Personal tab > Input.

2. Tap the Word Completion tab.

SHORTCUT: From within any application, tap the up arrow next to the

Input Panel icon and tap Options > Word Completion tab.

Using the Phone Features 5–1

5Using the Phone Features

Use the HP iPAQ Mobile Messenger phone to make and receive telephone

calls and send and receive Text and MMS (Multimedia Message Service)

messages. Your mobile phone service provider may provide other useful

services such as voicemail.

The phone can also be used to connect to an Internet Service Provider (ISP)

or work network so you can browse the Web and read e-mail. You can

connect to the Internet or work network over GPRS/EDGE (General Packet

Radio Service/Enhanced Data Rates for Global Evolution), or you can use

GSM (Global System for Mobile Communications) for dial-up access.

For information on establishing GSM/GPRS/EDGE data connections,

refer to Chapter 7, “Making Data Connections.”

NOTE: EDGE is an enhancement to GPRS technology and enables higher

speed data connections than GPRS. This means faster phone multimedia

capabilities such as sending and receiving SMS/MMS messages, and

sharing video clips. Check with your service provider to see if they

support EDGE technology. If your service provider does not support the

EDGE network, the HP iPAQ defaults to GPRS.

SIM Card

A Subscriber Identity Module (SIM) card is required to operate the phone

features on your HP iPAQ. The SIM card is a plastic card embedded with

a computer chip that stores and transacts data. After the SIM card is

activated by your mobile phone service provider, the computer chip will

contain information about your phone number, service, registration

information, and contacts, as well as memory to store speed dial numbers

and text or SMS/MMS messages that you receive.

With the exception of emergency calls, the SIM card must be inserted into

the SIM slot under the battery on the back of the HP iPAQ for voice/data

calls to work.

To dial an emergency number from the Phone keypad, tap the emergency

number appropriate for your region, and then tap Talk.

NOTE: tSee your local telephone directory for emergency numbers used

in your area. Emergency numbers can be dialed without a SIM card

being inserted in the HP iPAQ and there is no charge for

emergency calls.

Using the Phone Features 5–2

Inserting a SIM Card

To insert the SIM card into the HP iPAQ, you must first remove the battery

cover and the battery from the HP iPAQ.

1. On the back of your HP iPAQ, press down the battery cover

latch 1.

2. Use your thumb to slide the battery cover down and away from the

HP iPAQ 2.

3. Remove the battery.

NOTE: If the battery is already installed, you must remove it before

inserting the SIM card. For more information on removing the battery, see

Chapter 13, “Managing the Battery.”

Using the Phone Features 5–3

4. Insert the SIM card into the SIM slot by aligning the notched corner

on the card with the notched corner in the SIM slot, then push the

SIM card into the SIM slot. Be sure to push it in all the way.

NOTE: The gold side of the SIM card should be facing down when it is

inserted into the SIM slot.

Removing the SIM Card

1. Repeat the previous steps to remove the battery cover and battery.

2. Insert the stylus 1 into the right side of the SIM slot opening 2 and

nudge or push the SIM card out of the slot 3. Do not touch the

metal contacts.

Using the Phone Features 5–5

You can disable your PIN; however, for security reasons, it is

recommended that you keep it enabled. While enabled, you must enter

your PIN every time you turn on your phone features.

CAUTION: After three consecutive, incorrect PINs are entered, the SIM

card locks to prevent further use. If the letters PUK (PIN Unblocking Key)

display on your HP iPAQ screen, you have locked your SIM card and

must enter your PIN Unblocking Key on the screen to unlock it. If you did

not receive a PIN Unblocking Key with your SIM card, you must contact

your service provider to unlock it.

If your HP iPAQ is ever stolen or lost, the PIN safeguards your phone

against fraudulent use.

To enable your PIN:

1. From the Phone keypad, tap Tools > Options > Phone tab.

2. Select Require PIN when phone is used.

3. Enter the PIN number given to you from your mobile phone service

provider along with the SIM card, or enter the default PIN code

of 1234.

4. Press ENTER to enable your PIN.

NOTE: To change the PIN at any time, tap CHANGE PIN.

NOTE: To safeguard your HP iPAQ from unauthorized use, see the

section Setting a Password in Chapter 1, “Getting to Know Your HP iPAQ

Mobile Messenger.”

Phone Buttons and Icons

Phone Icons Definition

Press this green Answer/Send Application

Button to answer a call, access the phone keypad,

and send a call.

Press and hold this Button to activate the

speakerphone function during a phone call.

Press and hold this red End Call

Application Button to end a call.

Phone is powered off.

Phone is powered on.

Network is searching or unavailable.

Using the Phone Features 5–6

Checking Your Connection

and Signal Strength

After you insert the activated SIM card into your HP iPAQ, your unit

connects to your service provider’s network.

The powered on icon indicates that you are connected to your service

provider’s network. After that, full strength connection is indicated by the

signal strength icon . The number of vertical bars in the icon diminish

as the signal strength diminishes. The phone icon indicates no signal.

Phone connection unavailable or network error.

Signal strength indicator for phone functions.

Call missed. Tap this icon to view missed calls.

Call Forwarding Active.

Phone Volume is active.

Microphone is in mute position.

GPRS Service is available.

Active data connection to GPRS network.

Event notifications set to vibrate instead of alarm. To

set to vibrate: Tap Speaker icon in the Navigation

bar and in the pop-up menu, tap Vibrate.

One or more instant messages have been received.

Tap this icon to view messages.

One or more e-mail/SMS/MMS or voicemail

messages have been received. Tap this icon to

view messages.

Message Center indicates messages received from

different communication areas such as phone or

voice messages, e-mail/SMS/MMS,

announcements, etc. Tap this screen icon to view all

messages in the message center.

Phone Icons Definition

(continued)

Using the Phone Features 5–7

Automatic Frequency Band Selection

Your HP iPAQ has an integrated GSM/GPRS/EDGE feature that supports

four different frequency bands which allow for international roaming.

When traveling between countries and wireless network operators, the

automatic selection feature changes the frequency bands of the GSM/

GPRS/EDGE connection settings. It does this by initiating an automatic

search for network frequency bands when your home bands are not

available. This automatic selection feature is the default setting on your

HP iPAQ.

Turning the Phone On and Off

You can turn your Phone on and off while keeping your HP iPAQ

powered on.

There are several ways to turn on your Phone:

•From the Today screen, tap the iPAQ Wireless icon in the

Command bar at the bottom of the screen, then tap the Phone

button on the iPAQ Wireless screen.

•From the Today screen, use the numeric keypad on the Thumb

Keyboard to enter a phone number. After the first or second number

is entered, the phone keypad displays. Tap Yes when asked if you

want to turn on the phone.

•Press the green Answer/Send Phone button to display the phone

keypad. Enter a phone number on the keypad and tap Yes when

asked if you want to turn on the phone.

•From the Today screen, tap the phone icon in the Navigation

bar and, from the pop-up menu, tap Turn off flight mode.

NOTE: Flight mode turns on/off all wireless functions on your

HP iPAQ. Turn on Flight mode when you are traveling by air to

prevent a wireless function from turning on automatically.

There are two ways to turn off your phone:

•From the Today screen, tap the iPAQ Wireless icon in the

Command bar, then tap the Phone button to turn off the phone.

•On the Today Screen, tap the icon in the Navigation bar and,

from the pop-up menu, tap Turn on flight mode.

NOTE: Leave the phone turned on to receive calls when your HP iPAQ is

powered off.

You can use other programs on your HP iPAQ during a call. To quickly

switch back to Phone, tap the green Answer/Send application

button, or tap Start > Programs > Phone.

Using the Phone Features 5–9

b. Use Display to adjust backlight brightness and set a timer to

turn off the backlight, if HP iPAQ is not used.

c. Use Power to set a timer to turn off the power if HP iPAQ is

not used.

d. Use Wireless to keep wireless settings On or Off (Phone

and Bluetooth).

5. Tap OK when you have finished setting the profile.

6. Tap Yes to save your changes to the selected profile.

Switching a Profile

To quickly switch a profile from within any application:

1. Press and hold the Power button to bring up the quick

access menu.

NOTE: The quick access menu includes five tasks and a shortcut to Profile

Settings, in addition to the profile selections that allow you to switch tasks.

2. Tap the desired profile.

NOTE: The quick access menu disappears after 10 seconds.

NOTE: When the Backlight is adjusted to its lowest setting, it cannot be

turned on from the quick access menu. It can only be turned back on by

accessing the Start menu > Settings > System tab > Backlight >

Brightness tab and adjusting the brightness level. The brightness level

can also be accessed from the battery icon if the TodayPanel

is displayed.

Making and Receiving Phone Calls

You can now make local or long distance domestic calls and, if you

requested the setup, you can also make international calls.

Using the Phone Features 5–10

Making a Call

1. From the Today screen, tap the iPAQ Wireless button in the

Command bar.

2. Tap the Phone icon on the iPAQ Wireless screen.

Alternate: Tap the icon in the Navigation bar > Turn off

flight mode (activates the wireless radio which turns on

your phone).

3. Press the green Answer/Send button on the Thumb

keyboard or from the Today screen, tap Start > Phone.

4. Tap the number you want to call, and then tap Talk or press the

green Answer/Send button from the Thumb keyboard.

NOTE: Press the Blue key to access the numbers on the Thumb Keyboard.

Refer to the following sections for alternate ways to make a call:

•“Making a Call from Contacts”

•“Making a Call Using Speed Dial”

•“Making a Call From Call History”

•“Making a Conference Call”

Answering a Call

When you receive a phone call, the HP iPAQ rings or vibrates and a

message appears on the screen, giving you an option to either answer or

ignore the incoming call.

•Tap Answer on the Phone keypad or press the green

Answer/Send button on the Thumb keyboard to receive

the call.

NOTE: To silence the phone and reject the call, tap Ignore. This may

send the caller to your voicemail or send out a busy signal, depending on

your service provider.

Ending a Call

When your phone call is finished, tap End on the Phone keypad or press

and hold the red End Call button to end the call.

Making a Call from Contacts

•Tap on the Contacts icon located on the Thumb keyboard, tap

and hold the contact’s phone number, and then tap Call Work,

Call Home, or Call Mobile.

•To make a call from an open contact, tap the number you want

to call.

Using the Phone Features 5–12

4. Tap OK.

Editing a Speed Dial Entry

1. From the Speed Dial list, tap and hold the contact name in the

box to the right of the assigned speed dial number.

2. Tap Edit or Delete.

3. Enter your changes and tap OK.

Making a Call From Call History

From the Phone keypad, tap Call History, and then tap the icon next to

the desired number.

Making a Conference Call

You can create a three-way conference call between yourself and two

other parties.

From the Phone keypad, dial the first number, tap Talk and after the call

is initiated, tap Hold, dial the second number, tap Talk and then

tap Conference.

Adjusting Phone Volume

During a phone call, push the Phone volume slider on the top, left side of

the HP iPAQ up (+) or down (-).

NOTE: The Phone volume can only be adjusted during a phone call.

Enabling the Mute Function

During a call, you can mute your microphone so that the person with whom

you are speaking cannot hear you, but you can still hear him or her. This

is useful if you do not want the other person to hear a conversation or

background noise on your side of the call.

From the Phone keypad, tap the microphone icon in the Command

bar to mute or unmute a call.

Setting Ring Tones

1. Tap > Settings > System tab > HP Profiles.

2. Tap the Alert icon and tap the drop-down list under Ring

type to select the type of ring to be used.

3. Tap the drop-down list under Ring tone and select the ring tone to

be used.

4. To listen to the selected sounds, tap the Play icon. When you are

finished listening, tap the red Stop icon.

NOTE: You can also select Ring Tones by tapping Start > Settings >

Phone icon.

Using the Phone Features 5–13

NOTE: To use custom.wav, .mid, or .wma files as ring tones, use

ActiveSync on your personal computer to copy the file to the My

HP iPAQ\Windows\Rings folder on your HP iPAQ. Then, select the

sound from the Ring tone list.

To control tapping sounds for the keypad:

1. From the Start menu, tap Settings > Personal tab > Sounds

& Notifications.

2. Place a checkmark in the box next to Screen taps and select Soft or

Loud. If there is no checkmark in the Screen taps box, a tone is

not played.

3. Tap OK to save the settings.

Changing Ring Tones

You can select a different sound to notify you of incoming calls.

1. From the Phone keypad, tap Tools > Options.

2. Tap the Ring tone listbox, and select the sound you want to use.

Changing Keypad Tone

You can change the tone you hear when entering a phone number on the

keypad. If set to Tones, the tone is heard continuously for as long as the

number on the keypad is pressed. If set to Beep, the tone is heard only for

one or two seconds.

1. From the Phone keypad, tap Tools > Options.

2. Tap the Keypad list, and select the option you want.

To prevent tones from being heard when entering a phone number,

select Off.

Adding Ring Tones

You can add different sounds to notify you of different events on your

HP iPAQ.

1. From the Start menu, tap Settings > System tab > Add

Ring Tone.

2. Tap the Ring tone list, and select the event sound you want to use,

and tap the Add button.

3. Tap OK when you are finished adding ring tones to your HP iPAQ.

Enabling Speakerphone Mode

Your HP iPAQ has a speakerphone mode that allows you to talk hands-free

or allows other people to listen to the caller.

To enable the speakerphone mode:

1. First make a phone call.

Using the Phone Features 5–14

2. Hold down the green Answer/Send button until the

speakerphone dialog box comes on and the speakerphone icon

appears in the top Navigation bar.

SHORTCUT: From the Phone keypad, tap Tools > Speakerphone.

3. To turn off the speakerphone, hold down the Answer/Send

button again.

WARNING! Do not leave the phone in speakerphone mode and hold it

to your ear, the sound may temporarily impair your hearing.

Taking Notes During a Call

To create a note during a call, tap the Note icon in the Command bar

and enter or record your note.

Using Voicemail

The first speed dial location is set as a default for your voice mailbox

number. When you insert your SIM card into your HP iPAQ, it sets as

default the voice mailbox number of your mobile service provider. You may

need to configure your phone to the Voicemail setting by dialing or setting

the Voicemail dial number or password.

To retrieve your voicemail:

•With the phone turned on and the phone keypad visible on the

screen, press and release the left side of the 5-way navigation

button, select 1 Voicemail, then press .

Putting a Call on Hold

During a phone call, tap Hold on the Phone keypad to put the call on

hold. The call on hold appears on the top right of the dialer screen. You

may switch between calls by tapping the call on hold.

Using Call Waiting

Call waiting notifies you of incoming calls when you are already in a

phone session.

To activate Call Waiting:

1. From the Phone keypad, tap Tools > Options > Services tab.

2. Tap Call Waiting > Get Settings.

3. Select Notify me.

4. Tap OK.

NOTE: To stop using call waiting, select Do not notify me.

Using the Phone Features 5–15

To use Call Waiting to answer an incoming call during a phone

conversation, tap Answer to move the current phone call to Call

Waiting. The phone call on Call Waiting displays on the screen. Tap

Ignore if you do not want to answer the incoming call.

Displaying Caller ID

You can display your caller ID when placing a phone call.

1. From the Phone keypad, tap Tools > Options > Services tab.

2. Tap Caller ID > Get Settings.

3. Select Everyone.

4. Tap OK.

NOTE: To prevent your caller ID from being displayed to others, select

No One.

Blocking Calls

Use call barring to block certain types of incoming and/or outgoing calls.

1. From the Phone keypad, type Tools > Options > Services tab.

2. Tap Call Barring > Get Settings.

3. Select the type of incoming and/or outgoing calls you want to

block such as barring incoming call when you phone is in roaming

mode or block all outgoing international calls.

4. Tap OK to close the program.

Forwarding Calls

Use call forwarding to forward all incoming calls to a different number.

1. From the Phone keypad, tap Tools > Options > Services tab.

2. Tap Call Forwarding > Get Settings.

3. Select Forward all incoming phone calls, and specify the

phone number to receive forwarded calls.

You can also use call forwarding to forward incoming calls to a different

number based on your situation.

• Select Unavailable to forward calls only when your phone is

turned off or you are unreachable.

• Select Busy to forward calls only when the line is busy.

• Select No answer to forward calls only when you can’t

answer your phone.

NOTE: To stop using Call Forwarding, clear the box next to Forward

all incoming phone calls.

Using the Phone Features 5–16

Changing the System Volume

You can adjust the volume for system sounds, such as the sound you hear

when you tap on program names and menu options.

•Tap the icon in the Navigation bar.

• In the pop-up volume box, move the system volume slider

to the desired volume level.

Select On, Vibrate, or Off to quickly change both the system and ringer

volume settings.

NOTE: You can also move the volume control on your HP iPAQ to quickly

change the ringer settings. The volume slider is located on the top, left

side of the HP iPAQ. Press up (+) or down (-) to adjust volume.

Change the Ringer Volume

There may be times when you want to change the ringer volume on your

HP iPAQ. For example, you may want to increase the ringer volume when

you're anticipating an important call, or immediately silence the ringer

when you receive a call during a meeting or when you're in a

quiet environment.

•Tap the icon in the Navigation bar.

•In the pop-up volume box, move the ringer volume slider to the

desired volume level.

Select On, Vibrate, or Off to quickly change both the ringer and system

volume settings.

NOTE: You can also move the volume control on your HP iPAQ to quickly

change the system volume settings.

Changing the Phone Settings

To change the phone settings, from the Start menu, tap Settings

> Phone.

You can customize phone settings such as the ring type and ring tone to

be used for incoming calls, and the keypad tone to be used when entering

phone numbers. You can also protect your phone from unauthorized use

with a PIN.

•To change phone settings from the Phone keypad, tap Tools in the

Command bar > Options > Phone tab.

From the Phone tab, you can change the following items:

• Ring type—Tap the Ring type list and select the

desired option.

• Ring tone—Tap the Ring tone list and select the sound

you want.

Using the Phone Features 5–20

•To access the GPRS Settings, from the Start menu, tap Settings >

Connections tab > GSM/GPRS Manager icon. If your

operator name appears in the drop-down list, it is recommended

that you use that connection and, if needed, edit the

default settings.

NOTE: In the event the automatic detection setting fails, complete one of

the two following items:

•Select the appropriate country and operator name, then tap OK.

The settings automatically update.

•If your operator name does not appear in the drop-down list, you

must manually add it to the list by tapping the down arrow in the

Operator box and tapping “Create New . . .”. For more

information, refer to the “Creating a New Connection” section in

this chapter.

Editing Network Properties

CAUTION: Editing Network Properties is not recommended unless you

are being accompanied by service provider Help.

Tapping on the Edit network Parameters bar on the GSM/GPRS

Settings screen gives you access to the following areas:

• Internet Connection Information—Walks you through the

different settings for GPRS (General Packet Radio Service) and

CSD (Circuit Switched Data) connections.

• MMS Multimedia Messages—Allows you to modify the

Multimedia Message Service Center (MMSC) address.

Using the Phone Features 5–21

•WAP Information

Editing an Internet Connection

If you tapped Internet Connection Information on the Edit

properties screen:

1. Select the connection to edit by tapping the appropriate box and

tap OK.

2. Enter a name for the connection such as the carrier name.

3. Tap Next.

4. After APN: enter the Access Point Name of the server you are

attempting to connect.

5. After Name: enter the Log on for your connection.

6. After Password: enter the password for your connection.

7. Tap Next.

8. On the next screen, tap one of the following:

• Dynamic IP address

• Static IP address

9. Tap Next.

10. On the next screen, tap one of the following:

• Dynamic DNS addresses

• Static DNS addresses

11. Tap OK.

Editing MMS Multimedia Messages Settings

If you tapped MMS Multimedia Messages on the Edit

properties screen:

1. Under Enter the MMS Center Address, enter the URL where

all MMS messages are sent for delivery by the network (for

example, enter http://mms.mobilelife.co.th).

Using the Phone Features 5–22

2. Enter the following information:

•APN: Access Point Name of the MMS server being connected.

•Name: Log on name for the MMS server.

•Password: Password for the MMS server.

3. Tap OK.

4. Enter the IP address and the Port number for the WAP MMS

Gateway and tap Finished.

Editing WAP Information Settings

If you tap WAP Information on the Edit properties screen:

1. Enter the IP address and the Port information for the WAP Gateway.

2. Tap Next.

3. Enter the IP address and the Port information for the secure

WAP Gateway.

4. Tap Finish.

Creating a New Connection

Before creating a new connection, you must obtain the following

information from your service provider:

•To make a GPRS Connection:

•APN

• Username/Password

•DNS address

• IP address

•To make an MMS Connection:

• MMS Center Address

• APN (for MMS server if different than Internet connection)

•User Name/Password

•IP Address/Port

•To make a WAP connection:

•IP Address

•Port

•WAP Gateway

•Secure WAP Gateway—IP and Port

To create a new connection:

1. Tap the down arrow under Country and select the appropriate

country name.

Using the Phone Features 5–24

device generates a distinct audio tone for every supported character, and

these tones are decoded and converted back into text on the receiving

TTY device.

Due to the use of audio compression codecs in modern digital cellular

telephones, these TTY audio tones may be unintentionally distorted while

being transmitted through cellular telephones. In order for TTY devices to

continue to work in cellular networks, the cellular telephone must be set

into a mode that optimizes the compression codec to handle TTY tones

instead of the human voice.

NOTE: For information on connecting TTY devices to the HP iPAQ, refer

to the TTY device manufacturer’s documentation.

Enabling TTY Support

Before connecting the optional TTY device to the phone, you must enable

TTY support in order to prepare the HP iPAQ Phone to expect a TTY device

to be connected.

To enable TTY support:

1. From the Start menu, tap Phone > Tools > Options > TTY tab.

2. Place a checkmark in the Enable TTY support box by tapping it.

3. Tap OK. The TTY icon displays in the Navigation bar when it

is enabled.

4. Connect the optional TTY device or plug into the headphones as

stated in the TTY manufacturer’s documentation and connect the

headphones to the HP iPAQ. This connection activates the TTY

audio mode.

Making a Phone Call Using the TTY HP iPAQ

To make a phone call:

1. Press the green Answer/Send phone button on the front of the

HP iPAQ to launch the phone keypad.

Using the Phone Features 5–25

2. Dial the phone number of the person you are trying to reach who

also has a TTY device connected to their phone. If the prompt

displays asking if you want to turn on the phone, tap Yes.

3. When the phone call is answered, start typing onto the

TTY keyboard.

The letters typed into the machine are turned into electrical signals

that travel over regular telephone lines. When the signals reach

their destination (another TTY device), they are converted back into

letters which appear on a display screen, are printed out on paper,

or both.

When you are finished typing your phone conversation, the person

on the other end of the line may begin typing their answers or

comments to you.

4. To end a phone call, press and hold the red End Call phone

button on the front of the HP iPAQ.

NOTE: TTY audio mode activation may not be possible while a telephone

call is already in progress.

NOTE:

•If a normal headset is connected while TTY support is enabled, the

audio quality may be decreased.

•If a Bluetooth headset is connected while TTY support is enabled,

the audio quality will not change because TTY audio mode has not

been activated.

•However, if you make a phone call using a Bluetooth headset while

TTY mode is enabled AND a plug has been inserted into the

headphone jack, TTY audio mode will be activated and voice

quality will decrease.

Deactivating TTY Audio Mode

To deactivate TTY audio mode:

•Remove the plug from the headphone jack or

•Uncheck the Enable TTY support check box in the Start menu

> Phone > Tools > Options > TTY tab.

Disabling TTY Support

To disable TTY support:

1. From the Start menu, tap Phone > Tools > Options >

TTY tab.

2. Uncheck the Enable TTY support box.

NOTE: It has not been determined if deactivation by either method is

possible while a TTY telephone call is in progress.

Managing Multiple Wireless Connections 6–2

Power Buttons

The two Power buttons display:

•Gray background with an x when they are powered off.

•Amber background when they are powered on and signals are

available, but not connected.

•Green background when they are powered on and connected or

associated with another HP iPAQ.

NOTE: If a button does not immediately respond when tapped, it may be

busy performing a task you requested.

The All Off button displays:

•Gray background with the x when all wireless

features are powered off.

•Green background when one or more wireless features are

powered on.

Settings Buttons

The Settings buttons—Phone Settings, Bluetooth Settings, and Bluetooth

Manager— only function when the Power buttons are enabled. With the

Power button turned on, press the Settings button to open a page with

information about configuration and settings for that particular

wireless feature.

NOTE: You cannot access these configuration pages if you press the

Settings buttons while in a disabled state.

Phone Settings Button

First, tap the Phone Power button to power it on; then press the

Settings button to open the configuration screen.

NOTE: For information on configuring the Phone settings, refer to

Chapter 5, “Using the Phone Features,” and Chapter 7, “Making Data

Connections.”

Bluetooth Settings and Manager Buttons

First press the Bluetooth Power button to power it on; then press either

the Settings or Manager button to open the Bluetooth settings and

configuration screens.

NOTE: For information on configuring Bluetooth settings or manager,

refer to Chapter 9, “Using Bluetooth.”

Managing Multiple Wireless Connections 6–3

Managing Data Connections

When you tap a data connectivity icon in the Navigation bar, it opens a

drop-down connectivity box that displays the status of your wireless data

connections and information about which service is connected. From this

drop-down box, you can also create new connections, access wireless

settings menus, and turn on or off the wireless features.

NOTE: For information on configuring data connections, refer to Chapter

7, “Making Data Connections.”

Data Connectivity Icons

Inactive connection to computer or wireless network.

Active connection to computer or wireless network.

GPRS service is registered and available if you are subscribed to

the GPRS service.

Active data connection to GPRS network.

Making Data Connections 7–1

7Making Data Connections

The HP iPAQ hw6500 Mobile Messenger series offers you a

comprehensive set of wireless capabilities to keep you connected in or out

of the office. With Global System for Mobile Communications/General

Packet Radio Service/Enhanced Data Rates for Global Evolution (GSM/

GPRS/EDGE), and Bluetooth integrated into a single HP iPAQ, you have

broad coverage offering high speed access to the Internet, and to business

and personal information.

NOTE: EDGE is a global standard for wireless wide-area data

communication being rapidly deployed by GSM carriers worldwide.

Actual download speeds may vary. Coverage is subject to transmission

limitations and terrain, system capacity and other limitations. Not all

features and service options are available in all areas.

Use the following options to get connected:

•Use the GPRS/EDGE technology integrated on your HP iPAQ to

connect to a Virtual Private Network (VPN) or to remotely connect

to your mobile Internet Service Provider (ISP).

•Make a wireless GSM/GPRS/EDGE connection to place a phone

call or send or receive e-mail, text message, or Multimedia

Message Service (MMS) messages.

NOTE: EDGE technology delivers faster data speed than GPRS to mobile

devices. It allows users to connect to the Internet and send and receive

data, including digital images, Web pages and photographs faster than

with a GSM/GPRS network. If a network provider does not have EDGE

technology deployed, the HP iPAQ defaults to GPRS data transfer rates.

Because EDGE is integrated into GPRS technology when it is enabled by

your service provider, there is no visible means of identifying when it is

being used. You will only receive faster data transmission.

•Transfer information between Bluetooth enabled devices.

•Transfer information between two Infrared (IrDA) enabled ports.

NOTE: Use of dial-up and wireless Internet, e-mail, corporate networks,

and other wireless communications, such as Bluetooth-enabled devices,

may require separately purchased additional hardware and other

compatible equipment, in addition to a separately purchased service

contract. Check with your service provider for availability and coverage

in your area. Not all Web content may be available. Some Web content

may require installation of additional software. GPRS may not be

available in all networks. GPRS data transmission speeds may vary

based upon network capabilities and other conditions. The establishment

and continuation of a GPRS connection depends on network availability,

provider support, and signal strength.

Making Data Connections 7–6

3. Tap the Go icon.

Using a Favorites List

With Pocket Internet Explorer and a connection to the Internet, you can

view Web sites on your HP iPAQ by selecting one from your

Favorites list.

To select a Web site from your Favorites list:

1. From the Start menu, tap Internet Explorer.

2. Tap the Favorites icon located in the Command bar, and

then tap the Web site you want to view.

Using GPS Navigation 8–1

8Using GPS Navigation

Getting Acquainted

Your HP iPAQ includes Global Positioning System (GPS) Navigation

technology; therefore it is capable of using GPS software applications that

are compatible with this device. The GPS technology on your HP iPAQ is

based on a worldwide system of GPS satellites orbiting the earth that

continuously transmit digital radio signals. These radio signals contain

data on the satellites’ locations and their exact clock time and are used to

determine your location on the earth.

With your GPS capable device, you can use navigation software from

other third-party companies. For GPS navigation solutions recommended

by HP, visit www.hp.com/go/gpsnavigation. However, before you

purchase, download or install any GPS software, you must determine that

the application is compatible with this device. Check with the GPS

software supplier to see if their software is compatible with the HP iPAQ

hw6500 Mobile Messenger series.

Setting Up Your HP iPAQ

First follow the instructions in the printed

Getting Started

document until you complete creating a partnership with

your personal computer. This includes installing the Subscriber

Identity Module (SIM) and battery, synchronizing your HP iPAQ with your

personal computer, and establishing a partnership.

Setting Up Internet Access on Your HP iPAQ

Now that you have completed the steps in the Getting Started document,

verify you have Internet access on your HP iPAQ by visiting a web site such

as www.google.com or www.yahoo.com. If you cannot access the

Internet, take your HP iPAQ out of the cradle and use a GPRS connection.

For details, refer to Chapter 7, in the section “Creating a GPRS/EDGE

Connection.”

Using HP iPAQ Quick GPS Connection Utility

To improve connection performance, you need to enable the HP iPAQ

Quick GPS Connection Data Utility and download the latest data file. Even

though the GPS radio on your HP iPAQ is able to connect to the GPS

satellites without enabling the Quick GPS Connection Utility, it may take a

few minutes longer and even up to five minutes to locate the satellites if you

do not use this utility.

The default settings on the HP iPAQ Quick GPS Connection Utility are set

where the device cannot receive automatic updates unless you enable

the update feature.

Using GPS Navigation 8–2

To change the default settings:

1. From the Start menu, tap Settings > Connections > Quick

GPS Connection icon.

2. In the Settings tab, tap the check boxes to enable or disable the

following settings:

• Enable updates—This setting allows you to enable or

completely disable the Quick GPS Connection capability. If you

disable it, then your HP iPAQ will no longer receive Quick GPS

Connection updates and your GPS start-up times could take a

few minutes in unfavorable conditions.

• Initiate GPRS Connection for updates—This setting allows

Quick GPS Connection updates to your device over the air

when enabled.

• Show expiration reminders and warnings—This setting reminds

you by notification when your satellite location file is out-of-

date. If this setting is not enabled, notifications do not occur.

• Show tray icon on today screen—This setting turns on a Quick

GPS Connection icon in the Command bar that notifies you by

its color if your satellite location file is up-to-date.

• Blue icon—Up-to-date settings

• Blue/Gray icon—Less than 50% time remaining until

settings expire

• Gray icon—Expired settings

NOTE: The Quick GPS Connection data on your HP iPAQ can be

automatically updated using a wireless (GPRS) connection. This setting is

called “Initiate GPRS Connection for updates” as described above. Since

the update files are small, you should be able to download them

wirelessly with little impact to device performance.

Using Bluetooth 9–1

9Using Bluetooth

Your HP iPAQ comes with built-in Bluetooth technology that allows short-

range connections and provides fast, reliable, wireless communication.

With Bluetooth powered on, you can send information or perform the

following tasks wirelessly between two Bluetooth devices, within a range

of 10 meters (approximately 33 feet):

•Exchange contacts, calendar items, and tasks

•Send or exchange business cards

•Transfer files

•Synchronize with a computer through an ActiveSync connection

•Partner with a Bluetooth-enabled cell phone and use the cell phone

as a wireless modem

•Partner with a Bluetooth-enabled portable notebook and use your

HP iPAQ as a wireless modem

•Connect to other Bluetooth devices (Virtual COM port)

•Use a Bluetooth headset with your HP iPAQ

•Use Bluetooth headphones or Stereo speakers with your HP iPAQ

•Print to a Bluetooth printer

•Connect to a Bluetooth keyboard

•Create a personal area network (PAN) to chat, play games, etc.

NOTE: Use of dial-up and wireless Internet, e-mail, corporate networks,

and other wireless communications, such as Bluetooth-enabled devices,

may require separately purchased additional hardware and other

compatible equipment, in addition to a standard Wireless Local Area

Network (WLAN) or Wi-Fi infrastructure and a separately purchased

service contract. Check with your service provider for availability and

coverage in your area. Not all Web content may be available. Some

Web sites may not be formatted to fit Pocket PC screens and may require

installation of additional software.

Getting Acquainted with Bluetooth

Before you start using Bluetooth to establish wireless connections, take a

few minutes and familiarize yourself with:

•Terms used in this chapter

•Supported Services

•Bluetooth Settings

•Bluetooth Manager

NOTE: For more detailed help, refer to the Help files installed on your

HP iPAQ. From the Start menu, tap Help > Bluetooth.

Using Bluetooth 9–2

Understanding Terms

The following Bluetooth terms are used throughout this chapter.

Supported Services

The functions that Bluetooth supports are called services. You can

communicate only with Bluetooth devices that support at least one of the

following service profiles:

•AV (Audio Video/Stereo Headphone profile)

•BPP (Basic Printer profile)

•DUN (Dial-up Networking profile)

•FAX (Facsimile)

•FTP (File Transfer profile)

•GAP (Generic Access profile)

•HCRP (Hard Cable Replacement profile)

•HSP (Headset profile)

•LAP (LAN Access profile)

•OBEX (Object Exchange profile)

Term Definition

Authentication Verification of a numeric passkey before a connection

or activity can be completed.

Authorization Approval of a connection, access, or activity before it

can be completed.

Bonding (Paired devices) Creating a trusted connection between your device

and another. After a bond is created, the two devices

become paired.

A paired device does not require authentication

or authorization.

Device address Unique electronic address of a Bluetooth device.

Device discovery Location and recognition of another Bluetooth device.

Device name Name that a Bluetooth device provides when

discovered by another device.

Encryption Method of protecting data.

Passkey Code you enter to authenticate connections or

activities requested by other devices.

Personal Information

Manager (PIM) Collection of programs used to manage daily

business tasks (for example: Contacts, Calendar,

and Tasks).

Profiles Collection of Bluetooth settings.

Service discovery Determination of which programs you have in

common with other devices.

Using Bluetooth 9–3

•OPP (Object Push profile)

•PAN (Personal Area Network profile)

•SPP (Serial Port profile)

•ActiveSync (Uses SPP to connect to ActiveSync on a computer)

Working with Bluetooth Settings

From the tabs in Bluetooth Settings, you can:

•Select or add a user profile

•Turn Bluetooth on and off

•Enter or change your HP iPAQ Bluetooth Identification

•Set your connection preferences

•Enable Bluetooth services

•Specify security settings

•Define settings for sharing and connecting

•View software and port information

Turning On Bluetooth

To turn on Bluetooth:

1. From the Today screen, tap the iPAQ Wireless icon in the

Command bar.

2. On the iPAQ Wireless screen, tap the Bluetooth icon.

When Bluetooth is turned on, the Bluetooth LED on the top of your

HP iPAQ blinks blue.

To turn off Bluetooth, tap the Bluetooth icon again. When Bluetooth is

turned off, the Bluetooth LED stops blinking and no incoming or outgoing

Bluetooth connections are possible.

BATTERY SAVING TIP: Turn Bluetooth off when you are not using it.

Opening Bluetooth Settings

1. From the Today screen, tap the iPAQ Wireless icon in the

Command bar.

2. On the iPAQ Wireless screen, tap Bluetooth > Settings.

NOTE: Bluetooth must be powered on to enable the Bluetooth Settings

button. You cannot access the settings if you press the Bluetooth Settings

button while in a disabled state. For this reason, tapping the Bluetooth

button is included in all following instructions. Tapping the Bluetooth

button when it is already on turns it off.

Using Bluetooth 9–5

3. In the Services box, select the service you want to enable:

File Transfer, Information Exchange, Serial Port,

Personal Network Server, Hands free, or Dial-up

Networking Server.

4. The Service you select automatically enables the Service

settings. Tap on the appropriate check box to change these

Service settings to your preference.

5. Tap OK to return to the iPAQ Wireless screen.

NOTE: If you select Authorization required in the Service Settings,

you must authorize each connection. Your HP iPAQ will then always ask

you if the connection should be permitted.

Secure Connections using a Passkey or Bond

To establish a secure connection with another device, you can use the

passkey feature or an established bond. You can also add data encryption

to this type of security.

A passkey is a code you enter to authenticate connections requested by

other devices. The passkey must be known and used by both parties or the

connection will not be allowed.

To require a passkey or bond:

1. From the Today screen, tap iPAQ Wireless > Bluetooth >

Settings > Services tab.

2. Tap the tab for the service you want to enable: File Transfer,

Information Exchange, Serial Port, Personal Network

Server, Hands free, or Dial-up Networking Server.

3. Select Authentication (Passkey) required.

4. Select Encryption Required if you want to require all data

exchanged between the devices to be encrypted.

5. Tap OK.

Using Bluetooth 9–6

Setting a Shared Folder

You can determine the folder that other devices access when they connect

to your HP iPAQ.

To select a shared folder:

1. From the Today screen, tap the iPAQ Wireless icon >

Bluetooth > Settings > Services tab.

2. Under Services, tap File Transfer.

3. Under Service Settings, select your preferred settings.

4. Tap the Advanced tab.

5. Tap the Folder icon and locate a desired file folder.

6. Tap OK.

Understanding Profiles

Use profiles to quickly enable selected personal settings in

multiple environments.

Creating a Profile

To create a profile:

1. From the Today screen, tap the iPAQ Wireless icon in the

Command bar.

Using Bluetooth 9–8

2. From the General tab, tap the Profile icon.

3. Select a profile from the Add/Delete Profiles list.

4. Tap the Rename button.

5. Enter a new descriptive name.

6. Tap OK.

Deleting a Profile

1. From the Today screen, tap the iPAQ Wireless icon >

Bluetooth > Settings.

2. From the General tab, tap the Profile icon.

3. Select a profile from the Add/Delete Profiles list.

4. Tap the Delete button.

5. Tap Yes to confirm you want to delete the profile.

6. Tap OK.

Working with Bluetooth Manager

Use Bluetooth Manager to:

•Establish connections

•Exchange business cards or files

•Control the on-screen display

•Display shortcuts

Opening Bluetooth Manager

From the Today screen, tap the iPAQ Wireless icon in the Command

bar > Bluetooth > Manager.

The first screen that displays is My Shortcuts.

NOTE: Bluetooth must be powered on to enable the Bluetooth Manager

button. You cannot access Manager if you press the Manager button

while in a disabled state. For this reason, tapping the Bluetooth power-on

button is included in all following instructions. If Bluetooth is already

powered on when you perform the tasks, do not tap the Bluetooth button

again. Tapping the Bluetooth button when it is already on turns it off.

Locating and Selecting a Device

Several tasks require you to locate a device and connect to it. When you

are required to locate a device, the Bluetooth browser assists by searching

for a function that supports other Bluetooth devices.

Pairing Devices

When you pair devices, they must exchange a computer generated

security key prior to each connection. The security key is generated from

a unique Bluetooth device address, a random number, and a

user-defined password.

Using Bluetooth 9–9

After two devices are paired, they have a trusted relationship with each

other. No additional input is needed from the user. Therefore, connections

and activities can be performed between the paired devices without

constant authorization from the user.

NOTE: The remote device must have Bluetooth turned on and set up to

allow discovery before the connection can occur. For more information,

refer to “Setting Accessibility Properties.”

To pair devices:

1. From the Today screen on the HP iPAQ, tap the iPAQ Wireless

icon in the Command bar > Bluetooth > Manager.

2. Tap Tools > Paired devices.

3. Tap Add.

4. Tap the Lookup icon.

5. Tap the device name as it appears on the screen.

6. Create a password in the Passkey field so the devices can

be paired.

7. Tap OK.

8. Enter the same password into the other device.

9. Tap OK.

NOTE: Some devices, such as mobile phones, need to be placed in a

mode to accept a bond from another device. Refer to that device’s user

instructions for more information.

Unpairing Devices

You can remove a paired relationship between devices.

1. From the Today screen, tap the iPAQ Wireless icon in the

Command bar > Bluetooth > Manager.

2. Tap Tools > Paired devices.

3. Tap a device name.

4. Tap Remove.

5. Tap Yes to remove the pairing.

Connecting to Other Devices

Use ActiveSync, serial, and dial-up connections to communicate with other

Bluetooth devices. Establish a partnership with a cell phone and set up the

Bluetooth services it offers.

Identifying the Communications Port

You can identify the virtual COM ports used to create a serial port

connection. You may need to identify these COM ports for activities such

as printing.

Using Bluetooth 9–13

4. From the Bluetooth Browser screen, select the computer you

want to synchronize with, and tap Next.

5. Under Shortcut creation, create a shortcut name for this

connection, and then tap Finish.

NOTE: If you are setting up the ActiveSync partnership with an Evo

Notebook or Desktop computer, select the name you typed in Step 7 of

“Using the HP Bluetooth Multiport Module for Evo Notebooks and

Desktops.”

Establishing a Serial Connection

Use the wireless Bluetooth serial port connection just as you would a

physical serial cable connection. You must configure the application that

will use the connection to the correct serial port.

To establish a serial connection:

1. From the Today screen, tap the iPAQ Wireless icon >

Bluetooth > Manager.

2. Tap New > Explore a Bluetooth device > Next.

3. Tap the device name as it appears on the screen.

4. Follow the connection wizard instructions.

Dial-Up Networking Service

Use dial-up networking (DUN) to connect to the internet from another

Bluetooth device through your HP iPAQ.

Using Dial-Up Networking Service

NOTE: An activated SIM card must be inserted in your HP iPAQ and the

phone must be turned on before beginning this process.

To connect to a device that provides phone or modem access:

1. You must first pair the two devices. For more information, see the

section on ”Pairing Devices” in this chapter.

Using Bluetooth 9–14

On the Alternate device:

2. Use the documentation that came with the alternate device to create

a connection to the HP iPAQ hw6500 Mobile Messenger series.

3. On the screen that requires you to enter a phone number, use

*99#. You may need to enter the country code and area code,

depending on where you are calling. In addition, you may be

asked for the username and password you received from your

mobile phone service provider.

NOTE: To use the HP iPAQ hw6500 Mobile Messenger series as a dial-

up networking server, use the default phone number *99#. However,

depending on your location, you may not need the country code or area

code. For more information on this, ask your mobile phone

service provider.

4. Tap OK to begin dialing.

On your HP iPAQ:

5. To authorize the dial-up connection, tap Accept when the

Authorization Request screen appears.

On the Alternate device:

6. A dialog box displays your device dialing *99#. Once the

connection occurs, an icon with two green arrows pointing toward

each other appears on the Bluetooth Display screen.

You now have a dial-up networking connection to access

the Internet.

NOTE: In the future, you may only need to tap on the Dial-up Networking

icon in the Bluetooth Display screen to access the Internet.

Joining a Personal Area Network

Connect two or more Bluetooth devices to share files, collaborate, or play

multi-player games.

To establish a Personal Area Network connection:

1. From the Today screen, tap iPAQ Wireless > Bluetooth

> Manager.

2. Tap New > Join a personal network.

3. Follow the Connection Wizard instructions.

Working with Files

You can exchange information with a connected device and use the

Bluetooth File Explorer to:

•Navigate through the directories

•View files and folders

•Create new folders

Using Bluetooth 9–17

Sending, Exchanging, or Requesting Business Cards

1. From the Today screen, tap the iPAQ Wireless icon in the

Command bar > Bluetooth > Manager.

2. Tap Tools > Business Card Exchange.

3. Tap Send, Exchange, or Request a business card.

4. Tap the device where you want to send, exchange, or request a

business card.

NOTE: If you are Exchanging a business card, the device’s information (if

available) is sent directly to your Contacts list in Pocket Outlook.

5. Tap OK.

NOTE: Be sure the receiving device has been enabled to accept

the transfer.

Opening a Connection

1. From the Today screen, tap the iPAQ Wireless icon in the

Command bar > Bluetooth > Manager.

2. Tap New > Explore a Bluetooth device and allow the

discovery process to search for the Bluetooth enabled device.

3. When the discovered device icon displays on your screen, tap the

device in which you want to connect.

4. Tap OK.

NOTE: Bluetooth can be set to automatically open a connection by

setting your connection preferences. For more information, refer to

Chapter 7, “Making Data Connections.”

Using Bluetooth 9–18

Viewing Connection Status

You can view:

•Connection’s name

•Device’s name

•Connection status

•Length of connection

•Signal strength

To view the connection status:

1. From the Today screen, tap the iPAQ Wireless icon in the

Command bar > Bluetooth > Manager.

2. Tap and hold an active connection icon or list name, and

tap Status.

3. Tap OK.

Closing a Connection

1. From the Today screen, tap the iPAQ Wireless icon in the

Command bar > Bluetooth > Manager.

2. Tap and hold the connection icon or list name.

3. Tap Disconnect from the menu.

4. Tap OK.

Viewing Connection Information

1. From the Today screen, tap the iPAQ Wireless icon in the

Command bar > Bluetooth > Manager.

2. Tap and hold the connection icon or list name.

3. Tap Properties from the menu.

4. Tap OK.

Working with Connections

You can create shortcuts to open and view status information for

all connections.

Creating a Shortcut

Creating a shortcut to one or more services does not establish a

connection. It only places a shortcut to that service on the Shortcut tab

of the Bluetooth Manager.

To create a shortcut:

1. From the Today screen, tap the iPAQ Wireless icon in the

Command bar > Bluetooth > Manager.

2. Tap New, then a type of service, and tap Next.

3. When the discovered device displays on your screen, tap it (device

icon or list name) and tap Next.

Specyfikacje produktu

Marka:	HP
Kategoria:	Przenośny
Model:	ipaq hw6515 gps

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z HP ipaq hw6515 gps, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą

Twoje imię*

Twój email*

Napisz tutaj swoje pytanie

Instrukcje Przenośny HP

HP ipaq hw6500 gps Instrukcja

2 Lipca 2024

HP ipaq h6310 Instrukcja

2 Lipca 2024

HP ipaq hw6915 Instrukcja

1 Lipca 2024

HP ipaq 514 Instrukcja

1 Lipca 2024

HP iPAQ 100 Classic Instrukcja

1 Lipca 2024

HP ipaq h6365 Instrukcja

30 Czerwca 2024

HP ipaq hw6515 Instrukcja

30 Czerwca 2024

HP iPAQ 900 Instrukcja

30 Czerwca 2024

HP ipaq h6340 gps Instrukcja

30 Czerwca 2024

HP ipaq hw6515 gps Instrukcja

30 Czerwca 2024

Instrukcje Przenośny

Najnowsze instrukcje dla Przenośny

Huawei T211 Instrukcja

15 Stycznia 2025

Swissvoice mp01 Instrukcja

12 Stycznia 2025

Geemarc CL8360 Instrukcja

11 Stycznia 2025

HTC P3300 Instrukcja

11 Stycznia 2025

Alcatel IP Touch 600 Instrukcja

21 Grudnia 2024

Sanyo Katana II - Sprint Instrukcja

17 Grudnia 2024

Sunstech Arrow Instrukcja

5 Października 2024

Swisstone SD 530 Instrukcja

5 Października 2024

Emporia EUPHORIA 3G Instrukcja

5 Października 2024

Emporia Telme C135 Instrukcja

5 Października 2024