Instrukcja obsługi Honeywell XNPMI


Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Honeywell XNPMI (10 stron) w kategorii system alarmowy. Ta instrukcja była pomocna dla 7 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/10
M_2000060632_EN_1.0
Configurable Network Paging
Console
Product Instructions
Model: X-NPMI
2
Safety Guidelines
Danger
This sign reminds users of “dangerous voltage” on the
product.
Caution
This sign reminds users of important instructions
attached to the product.
Safety
guideline
In order to prevent electric shock, this equipment plug
shall not be used as conductor to extend power supply
line.
Do not block the equipment’s ventilation opening or put
other equipment on it.
Safety
guideline
Protect this equipment against rainwater or moisture so
as to avoid fire or electric shock.
Safety Precautions
Please carefully read and observe the following precautions before
installing, operating or using this product.
Electricity Utilization Safety
Local electrical safety regulations must be observed for product
installation and operation.
The Company shall not be liable for fire or electric shock accidents
caused by incorrect installation and mistake.
3
Transportation Safety
The product shall be protected against impact, violent vibration or
liquid erosion during transportation, storage and installation.
Environmental Requirements
Do not install the product within the environment of extreme
temperature or dust and mechanical vibration.
This equipment shall be well ventilated and protected against dust,
moisture, direct sunshine and violent during the use. It shall be kept
away from radiating objects or heat sources and well ventilated. The
optimum working environment temperature is 5-28ºC and relative
humidity <90%. If the equipment is in operation for a long time and
ambient temperature is too high, it is recommended that effective
measures should be taken to reduce temperature.
Requirements on grid power supply voltage by the equipment. In case
of too high, too low voltage or that fluctuating greatly, it is
recommended that AC regulated power supply should be installed.
As the product is not waterproof, do not expose it to rainwater or liquid
environment so as to avoid damaging it.
Put the equipment on solid level plane or install it on a rack.
Do not put other articles on the equipment top.
Safe Use Precautions
The equipment shall be installed under the direction of professionals.
Please carefully check power supply lines for damage prior to use. The
lines must be connected to the equipment in strict accordance with
identifications.
Power supply plugs and sockets shall match each other. Otherwise,
suitable sockets must be provided. Human damage to the sockets
shall be prohibited.
Power supply for the equipment shall be provided with sufficient
capacity and independent and reliable grounding lines.
Please ensure the equipment power supply grounding lines
interconnected and connected with the ground. Otherwise, it will cause
it abnormal, even damaged.
There are HV lines within it. When turn on the power, do not open the
equipment cover without permission so as to prevent electric shock.


Specyfikacje produktu

Marka: Honeywell
Kategoria: system alarmowy
Model: XNPMI

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Honeywell XNPMI, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje system alarmowy Honeywell

Instrukcje system alarmowy

Najnowsze instrukcje dla system alarmowy