Instrukcja obsługi Honeywell HCD484LX


Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Honeywell HCD484LX (144 stron) w kategorii kamera bezpieczeństwa. Ta instrukcja była pomocna dla 6 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/144
Document G-113079-002 – 02/07 – Rev 2
L-Series Color
Day/Night Camera
HCD484L HCD484LX
HCD485LX
User Guide
NTSC PAL
FraaisDeutsch Italiano
Nederland Español English
Revisions
Issue Date Revisions
1.00 10/06 New document
2 02/07 Updated document part no.; added
warning to p. iii.
Rev 2 ii G-113079-002
02/07
Rev 2 iii G-113079-002
02/07
Warnings
Installation and servicing should be performed only by
qualified and experienced personnel to conform to all local
codes and to maintain your warranty.
WARNING! 12 VDC/24 VAC models require the use
of CSA Certified/UL Listed Class 2
power adapters to ensure compliance
with electrical safety standards.
Where the MAINS plug or an appliance coupler is used as
the disconnect device, the disconnect device shall remain
readily operable.
WEEE (Waste Electrical and Electronic Equipment).
Correct disposal of this product (applicable in the
European Union and other European countries with
separate collection systems). This product should be
disposed of, at the end of its useful life, as per applicable
local laws, regulations, and procedures.
Explanation of Graphical
Symbols
RISK OF ELECTRIC
SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE THE COVER.
NO USER-SERVICEABLE PARTS INSIDE
REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL
THIS SYMBOL INDICATES THAT
DANGEROUS VOLTAGE
CONSTITUTING A RISK OF
ELECTRIC SHOCK IS PRESENT
WITHIN THE UNIT.
THIS SYMBOL INDICATES THAT
IMPORTANT OPERATING AND
MAINTENANCE INSTRUCTIONS
ACCOMPANY THIS UNIT.
CAUTION
English
Rev 2 2 G-113079-002
02/07
English
Before You Begin
Unpack Everything
Check that the items received match those listed on the
order form and packing slip. The L-Series Day/Night
packing box should include, in addition to this User Guide:
One L-Series Day/Night Color camera
One 4-pin connection cable
One Auto Iris lens plug
If any parts are missing or damaged, contact the dealer you
purchased the camera from or call Honeywell Customer
Service (see Contact Information on the back of this
manual).
Note You will also require a Phillips screwdriver to
complete the installation.
Please read this guide carefully
before you install the L-Series Day/
Night Color camera.
Keep this guide for future reference.
Rev 2 7 G-113079-002
02/07
3. Plug in the power supply. The power (PWR) LED
illuminates to show that the camera is receiving power.
If it does not illuminate, check the connections and the
power source.
Figure 6 Camera Connections
Remote Control Connections
The L-Series Day/Night Color camera can be controlled
remotely using an RS485 connection.
Figure 7 RS485 Camera Connection
PWR
VSD
DC
VIDEO
~207-253VAC 50HZ
REMOT E UP
DOWN
MENU
+
Connect to
Monitor
Power LED
Mains (230V) version shown
(HCD485L)
-+
GND
DC 12V
AC 24V
PWR VSD
DC
VIDEO
+
UP
DOWN
MENU REMOTE
RS485 Converter
TRx+
TRx-
4P Cable
3TRx+
2TRx-
4P CableConnect to
Serial Port
(COM1 or
COM2)
Serial
cable
4-Pin Cable Legend
1. Red Not used
2. Blue TRx-
3. Yellow TRx+
4. Black Not used
RS485
converter
Rev 2 8 G-113079-002
02/07
English
Programming
On-Screen Display (OSD)
Press MENU briefly to confirm the current operation setup.
The information (see Figure 8) disappears after a few
seconds if there is no button action.
Even though the OSD message disappears, the Camera ID
or Title continues to display, if selected in the CAMERA ID
sub-menu. To turn off the Camera ID or Title, either:
With external communication, change the display
position. Options are
Bottom right, bottom left, top left, top right, non-display
If you do not need to display the Operating OSD (for
example, for an external text overlay board), set it to
OFF at all times through a remote control using an
RS485 connection.
Figure 8 OSD Information Display
CAMERA ID/TITLE
Back Light WB Mode
Back Light displays if BLC is enabled (see BLC MODE
(Backlight Compensation).
Shutter Speed displays if the default shutter speed is
changed.
WB Mode always displays.
Shutter Speed


Specyfikacje produktu

Marka: Honeywell
Kategoria: kamera bezpieczeństwa
Model: HCD484LX

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Honeywell HCD484LX, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje kamera bezpieczeństwa Honeywell

Instrukcje kamera bezpieczeństwa

Najnowsze instrukcje dla kamera bezpieczeństwa