Instrukcja obsługi Hikvision DS-PDPC12P-EG2-WB

Hikvision system alarmowy DS-PDPC12P-EG2-WB

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Hikvision DS-PDPC12P-EG2-WB (5 stron) w kategorii system alarmowy. Ta instrukcja była pomocna dla 4 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/5
1
Appearance
CAUTION
RISK OF EXPLOSION IF BATTERY
IS REPLACED BY AN INCORRECT
TYPE.
REPLACEMENT OF A BATTERY
WITH AN INCORRECT TYPE THAT
CAN DEFEAT A SAFEGUARD.
CAUTION
CHEMICAL BURNING DANGER
DO NOT SWALLOW THE
BATTERY
KEEP NEW AND USED
BATTERIES AWAY FROM THE
CHILDREN.
IF YOU THINK BATTERIES MIGHT
HAVE BEEN SWALLOWED OR
PLACED INSIDE ANY PART OF
THE BODY, SEEK IMMEDIATE
MEDICAL ATTENTION.
CAUTION
DISPOSE OF USED BATTERIES
ACCORDING TO THE INSTRUC-
TIONS AND LOCAL REGULATION.
IR LED
Camera
LED Indicator
(Optional)Bracket
Tamper Interface
Tamper Button
Power Switch
CAUTION
IF THE BATTERY COMPARTMENT
DOES NOT CLOSE SECURETLY,
STOP USING THE PRODUCT AND
KEEP IT AWAY FROM CHILDREN.
2Enrollment
Note: The enrollment progress will be completed in 3 to 10 seconds normally.
Note: make the device power off, hold the tamper switch and then power on for re-enrollment synchronously.
The distance between the detector and AXPRO should be less than 50 cm.
1Enroll the Peripheral Locally
1. Log in to the APP Store, download and install Hik-Pro.
2. Power on the security control panel.
3. Log in the APP and tap the icon "+" . Scan the QR code or input the control panel serial No. to add the control panel.
1. In the APP, tap the "Enrollment Mode" button on the control panel page to make the control panel enter the enrollment status.
2. Loosen the screw and remove rear panel.
3. Power on the peripheral, and it will be automatically enrolled to the control panel.
7 Times
HIK-PRO
xxxx
Enrollment Mode
DS-PDPC12P-EG2-WE/WB
DS-PDPC12P-EG2-WE(B)/WB(B) Wireless PIRCAM
Di agram References
E N G L I S H
©2023 Hangzhou Hikvision Digital Technology Co., Ltd. All rights reserved.
About this Manual
The Manual includes instructions for using and managing the Product. Pictures, charts, images and all other information hereinafter are for description and explanation only. The information contained in the Manual is subject to change,
without notice, due to firmware updates or other reasons. Please find the latest version of this Manual at the Hikvision website (https://www.hikvision.com/).
Please use this Manual with the guidance and assistance of professionals trained in supporting the Product.
Trademarks
and other Hikvision’s trademarks and logos are the properties of Hikvision in various jurisdictions.
Other trademarks and logos mentioned are the properties of their respective owners.
Disclaimer
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THIS MANUAL AND THE PRODUCT DESCRIBED, WITH ITS HARDWARE, SOFTWARE AND FIRMWARE, ARE PROVIDED “AS IS” AND “WITH ALL FAULTS AND ERRORS”. HIKVISION MAKES
NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION, MERCHANTABILITY, SATISFACTORY QUALITY, OR FITNESS FOR A PARTICULAR PURPOSE. THE USE OF THE PRODUCT BY YOU IS AT YOUR OWN RISK. IN NO EVENT WILL
HIKVISION BE LIABLE TO YOU FOR ANY SPECIAL, CONSEQUENTIAL, INCIDENTAL, OR INDIRECT DAMAGES, INCLUDING, AMONG OTHERS, DAMAGES FOR LOSS OF BUSINESS PROFITS, BUSINESS INTERRUPTION, OR LOSS OF DATA, CORRUPTION OF
SYSTEMS, OR LOSS OF DOCUMENTATION, WHETHER BASED ON BREACH OF CONTRACT, TORT (INCLUDING NEGLIGENCE), PRODUCT LIABILITY, OR OTHERWISE, IN CONNECTION WITH THE USE OF THE PRODUCT, EVEN IF HIKVISION HAS BEEN
ADVISED OF THE POSSIBILITY OF SUCH DAMAGES OR LOSS.
YOU ACKNOWLEDGE THAT THE NATURE OF THE INTERNET PROVIDES FOR INHERENT SECURITY RISKS, AND HIKVISION SHALL NOT TAKE ANY RESPONSIBILITIES FOR ABNORMAL OPERATION, PRIVACY LEAKAGE OR OTHER DAMAGES RESULTING
FROM CYBER-ATTACK, HACKER ATTACK, VIRUS INFECTION, OR OTHER INTERNET SECURITY RISKS; HOWEVER, HIKVISION WILL PROVIDE TIMELY TECHNICAL SUPPORT IF REQUIRED.
YOU AGREE TO USE THIS PRODUCT IN COMPLIANCE WITH ALL APPLICABLE LAWS, AND YOU ARE SOLELY RESPONSIBLE FOR ENSURING THAT YOUR USE CONFORMS TO THE APPLICABLE LAW. ESPECIALLY, YOU ARE RESPONSIBLE, FOR USING THIS
PRODUCT IN A MANNER THAT DOES NOT INFRINGE ON THE RIGHTS OF THIRD PARTIES, INCLUDING WITHOUT LIMITATION, RIGHTS OF PUBLICITY, INTELLECTUAL PROPERTY RIGHTS, OR DATA PROTECTION AND OTHER PRIVACY RIGHTS. YOU
SHALL NOT USE THIS PRODUCT FOR ANY PROHIBITED END-USES, INCLUDING THE DEVELOPMENT OR PRODUCTION OF WEAPONS OF MASS DESTRUCTION, THE DEVELOPMENT OR PRODUCTION OF CHEMICAL OR BIOLOGICAL WEAPONS, ANY
ACTIVITIES IN THE CONTEXT RELATED TO ANY NUCLEAR EXPLOSIVE OR UNSAFE NUCLEAR FUEL-CYCLE, OR IN SUPPORT OF HUMAN RIGHTS ABUSES.
IN THE EVENT OF ANY CONFLICTS BETWEEN THIS MANUAL AND THE APPLICABLE LAW, THE LATTER PREVAILS.
Hangzhou Hikvision Digital Technology CO.,Ltd. No.555 Qianmo Road, Binjiang District, Hangzhou 310052, China
1. Check Signal Strength
Enter the signal checking mode by operating on the control panel. Trigger the detector.
Solid Green for 3 s - Strong Signal
Solid Orange for 3 s - Medium Signal
Solid Red for 3 s - Weak Signal
Red light flashes for 3S - Failure
2. Check the installation environment
3Installation
2Enroll the Peripheral with QR and serial No.
1. In the APP, tap the icon "+"and scan the QR code or serial No. on the peripheral.
2. Loosen the screw and remove rear panel.
3. Power on the peripheral, and it will be automatically enrolled to the control panel.
Hangzhou Hikvision Digital Technology CO.,Ltd. No.555 Qianmo Road, Binjiang District, Hangzhou 310052, China
7 Times
HIK-PRO
xxxx
Device
Signal Strength Test
HIK-PRO
3. Install the Detector
Note: The additional force shall be equal to three times the weight of the equipment but not less than 50N. The equipment
and its associated mounting means shall remain secure during the installation. After the installation, the equipment,
including any associated mounting plate, shall not be damaged.
Make sure there is no obstacle sheltering the LENs and IR light.
with Screws
a. Knock out the screw holes on the rear panel.
with the Sponge Tape
Paste the device on the wall with sponge tape.
You can paste the detector on the wall or in the corner.
Hangzhou Hikvision Digital Technology CO.,Ltd. No.555 Qianmo Road, Binjiang District, Hangzhou 310052, China
b. Secure the rear panel on the wall with four screws.

Specyfikacje produktu

Marka: Hikvision
Kategoria: system alarmowy
Model: DS-PDPC12P-EG2-WB

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Hikvision DS-PDPC12P-EG2-WB, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje system alarmowy Hikvision

Hikvision

Hikvision DS-PDP15P-EG2 Instrukcja

3 Października 2024
Hikvision

Hikvision DS-PHA48-EP Instrukcja

24 Września 2024
Hikvision

Hikvision DS-PDCL12-EG2 Instrukcja

24 Września 2024
Hikvision

Hikvision DS-PDSMK-4 Instrukcja

24 Września 2024
Hikvision

Hikvision DS-PDPC12P-EG2 Instrukcja

24 Września 2024
Hikvision

Hikvision DS-PM1-O4H-H Instrukcja

24 Września 2024
Hikvision

Hikvision DS-PS1-B Instrukcja

24 Września 2024
Hikvision

Hikvision DS-PDBG8-EG2 Instrukcja

24 Września 2024
Hikvision

Hikvision DS-PS1-R Instrukcja

24 Września 2024
Hikvision

Hikvision DS-PDSKM-VG3 Instrukcja

24 Września 2024

Instrukcje system alarmowy

Najnowsze instrukcje dla system alarmowy

Ikea

Ikea BLÅSJÖN 105.740.93 Instrukcja

9 Października 2024
Ikea

Ikea PATRULL 100.989.49 Instrukcja

9 Października 2024
Ikea

Ikea DOPPA 403.033.64 Instrukcja

9 Października 2024
Ikea

Ikea ROTHULT 504.179.25 Instrukcja

9 Października 2024
Ikea

Ikea DOPPA 803.102.25 Instrukcja

9 Października 2024
Ikea

Ikea BLÅSJÖN 005.499.90 Instrukcja

9 Października 2024
Ikea

Ikea ROTHULT 004.296.19 Instrukcja

9 Października 2024
Ikea

Ikea DOPPA 103.102.24 Instrukcja

9 Października 2024
Ikea

Ikea MÖRKRÄDD 503.503.74 Instrukcja

9 Października 2024
Ikea

Ikea DOPPA 603.033.63 Instrukcja

9 Października 2024