Instrukcja obs艂ugi GMG Yepp e-bike set

GMG R贸偶norodny Yepp e-bike set

Przeczytaj poni偶ej 馃摉 instrukcj臋 obs艂ugi w j臋zyku polskim dla GMG Yepp e-bike set (2 stron) w kategorii R贸偶norodny. Ta instrukcja by艂a pomocna dla 3 os贸b i zosta艂a oceniona przez 2 u偶ytkownik贸w na 艣rednio 4.5 gwiazdek

Pobierz PDF
Strona 1/2
Ebike 2012/01
Installation instructions for the Yepp e-bike set
Contents
1. Mount the Yepp e-bike set on the Yepp Easyfit carrier as shown on the photo below.
The 4 clamps of the Easyfit carrier are not needed anymore.
Please note that the 4 bolts are mounted from the underside into the 4 slot holes.
See the picture below for the proper positioning and then mount the 4 nuts loosely on the bolts.
2. Now position the Yepp Easyfit carrier on your e-bike luggage carrier.
Please note that the position of the gravity point of the Yepp Maxi on the carrier must never
be further then 10 cm behind the rear axle. (see also the user instructions for the Yepp Maxi Easyfit and
Yepp Junior).
Ebike 2012/01
3. After correct positioning, please mount the 2 long bolts and tighten the nuts firmly.
Force: 8Nm. Please note that the Easyfit carrier is straight and parallel positioned on the e- bike luggage
carrier.
4. Now tighten the 4 other nuts firmly; force: 8Nm.
5. Check all bolts after a few weeks and tighten them again if necessary.
6. The Easyfit carrier is now ready for use to mount your Yepp Maxi Easyfit or Yepp Junior.
Recommendation
After installing and fitting the Yepp e-bike set on your Easyfit carrier , please check whether the
bicycle could tip over backwards when the child is in the seat. If so, move the Yepp Easyfit carrier forwards.
Check regularly that all fittings are sufficiently tightened.
Warnings
- The Yepp e-bike set and Yepp Easyfit carrier can only be installed on luggage carriers with a load capacity of
25 kg and meeting with EN 14872.
If the Yepp Easyfit carrier is used with the Yepp Junior, the luggage carrier must have a load
capacity of 35 kg.
- Use the Yepp Easyfit carrier only on e-bikes suitable for carrying the additional load.
Check the bicycle handbook or consult the cycle manufacturer or your dealer.
- The Yepp Easyfit carrier must not be used on motorised vehicles (including mopeds, scooters, etc.).
- Never modify the carrier yourself.
- Do not use the carrier if any part of it is faulty.
Safety advice
- Use a good two-legged stand.
Guarantee
GMG guarantees that this product at the time of purchasing has no defect in workmanship and material. GMG
guarantees the product for a period of 12 months after purchase date.
In case this product shows a material and/or manufacturing fault than GMG is required to respect this
guarantee. In that case please contact your dealer.
Rights of modifications reserved.
GMG bv
Tingietersweg 125 - 2031 ER Haarlem - The Netherlands - www.yepp.nl

Specyfikacje produktu

Marka: GMG
Kategoria: R贸偶norodny
Model: Yepp e-bike set

Potrzebujesz pomocy?

Je艣li potrzebujesz pomocy z GMG Yepp e-bike set, zadaj pytanie poni偶ej, a inni u偶ytkownicy Ci odpowiedz膮


Instrukcje R贸偶norodny GMG

GMG

GMG Yepp Maxi Instrukcja

24 Wrze艣nia 2024
GMG

GMG Yepp Mini Ahead adapter Instrukcja

24 Wrze艣nia 2024
GMG

GMG Yepp e-bike set Instrukcja

16 Wrze艣nia 2024
GMG

GMG Yepp Easyfit carrier Instrukcja

11 Wrze艣nia 2024
GMG

GMG Yepp Mini Instrukcja

8 Wrze艣nia 2024
GMG

GMG Yepp Junior Easyfit Instrukcja

8 Wrze艣nia 2024

Instrukcje R贸偶norodny

Najnowsze instrukcje dla R贸偶norodny

Walkera

Walkera Goggle 3 Instrukcja

15 Pa藕dziernika 2024
Walkera

Walkera Goggle 4 Instrukcja

15 Pa藕dziernika 2024
Somfy

Somfy Telis Lounge Instrukcja

5 Pa藕dziernika 2024
Navman

Navman NavBus Instrukcja

5 Pa藕dziernika 2024
Trelock

Trelock LS 320 Instrukcja

5 Pa藕dziernika 2024
DJI

DJI Phantom 3 Standard Instrukcja

5 Pa藕dziernika 2024
Bobike

Bobike Maxi City Instrukcja

5 Pa藕dziernika 2024
Tanita

Tanita 1210N Instrukcja

5 Pa藕dziernika 2024
Kerbl

Kerbl 81685 Cat flap Instrukcja

5 Pa藕dziernika 2024
Tanita

Tanita HC-212F Breath Checker Instrukcja

5 Pa藕dziernika 2024