Instrukcja obsługi Gamber-Johnson 7160-1982

Gamber-Johnson Kołyska/stacja dokująca 7160-1982

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Gamber-Johnson 7160-1982 (7 stron) w kategorii Kołyska/stacja dokująca. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/7
7160-1982
Dell Rugged Laptop Docking Station
Rev B
INST-1178
Printing Spec:
PS-001
© Copyright 2024 Gamber-Johnson, LLC
1 / 7
Gamber Johnson recommends the following power adapter to power the
docking station. They can be ordered from Gamber-Johnson seperatley.
7300-0714 - Bare Wire (11-16 Vdc Input, 120w Output) - Available with the
docking station as KIT
7170-1090-XX
This instruction sheet is for the following products:
Item No. 7160-1982-00
Dock - Dell Rugged Laptop, Non-RF, Non-HDMI
Item No. 7160-1982-03
Dock - Dell Rugged Laptop, Tri-RF, Non-HDMI
Item No. 7160-1982-10
Dock - Dell Rugged Laptop, Non-RF, With-HDMI
Item No. 7160-1982-13
Dock - Dell Rugged Laptop, Tri-RF, With-HDMI
This instruction sheet is for the Dell Rugged Laptop docking station only. For instructions
on features, set-up, and operation of the Dell Rugged computer, please refer to the
manual provided by Dell with the computer.
This docking station works with
Dell 12" Latitude Rugged Extreme 2-in-1 Laptop
1.
Dell 14" Rugged Laptop
2.
Dell 14" Rugged Extreme Laptop
3.
Dell 14" Rugged Extreme Business Laptop
4.
See page 4 for adjustment instructions.
If you need assistance or have questions, call Gamber-Johnson at 1-800-456-6868
Form
Revision
Product
INSTALLATION INSTRUCTIONS
Product Mounting Disclaimer
Gamber-Johnson is not liable under any theory of contract or tort law for any loss, damage, personal injury, special, incidental or consequential damages for personal injury or other damage
of any nature arising directly or indirectly as a result of the improper installation or use of its products in vehicle or any other application. In order to safely install and use Gamber-Johnson
products full consideration of vehicle occupants, vehicle systems (i.e., the location of fuel lines, brake lines, electrical, drive train or other systems), air-bags and other safety equipment is
required. Gamber-Johnson specifically disclaims any responsibility for the improper use or installation of its products not consistent with original vehicle manufactures specifications
and recommendations, Gamber-Johnson product instruction sheets, or workmanship standards as endorsed through the Gamber-Johnson Certified Installer Program.
During Installation:
DO NOT
connect this docking station to the vehicle battery until:
All other electrical connections are made
1.
Mounting of all components is complete
2.
Verification that no shorts exist in the entire system
3.
DO NOT
install equipment or route wiring or cords in the deployment path of any air bag.
When drilling into the vehicle, DO make sure that both sides of the surface are clear of anything that
could be damaged.
CAUTION:
If wiring is shorted to the frame, high current conductors can cause hazardous sparks
resulting in electrical fires or flying molten metal.
After installation:
Test the docking station to ensure that it is working properly.
File these instructions in a safe place and refer to them when performing maintenance or re-
installing.
WARNING
: Failure to follow all safety precautions and instructions may result in property damage,
serious injury, or death.
Safety is dependent on the proper installation and servicing of this docking station. It is important to
read and follow all instructions before installing this product.
To properly install a Gamber-Johnson docking station you must have a good understanding of
automotive electrical procedures and systems, along with proficiency in the installation and service of
aftermarket vehicle equipment.
There are no adjustments required at any time of the electrical components within the docking station.
Opening the docking station will void the product warranty.
IMPORTANT SAFETY INFORMATION FOR INSTALLERS
Conduct a "Bench Test"
Gamber-Johnson strongly advises a "bench test" be conducted to verify all electronic and
software issues are resolved prior to installation:
Make sure the computer is operational by itself.
1.
Insert computer into the docking station and verify that the computer is
2.
operating in the dock.
Interconnect entire assembly and verify start-up of all components, including
3.
other equipment (printers, modems, scanners, etc.)
Gamber-Johnson recommends positioning of all mounts and equipment in the vehicle
prior to the actual install to verify that mounting locations are safe and practical.
PRE-INSTALLATION RECOMMENDATIONS
2 / 7
DELL LAPTOP DOCKING STATION FEATURE IDENTIFICATION
Docking
Connector
Rear Hook
TRI-RF Connector
(Optional)
Adjustable Front
Hooks
Lockable Latch
Front Hook
Adjustment Button
IF USING FULL PCB SKU WITH HDMI: VISIT
WWW.GAMBERJOHNSON.COM
TO
DOWNLOAD THE REQUIRED DOCKING STATION DRIVERS FOR YOUR DEVICE
WWW.GAMBERJOHNSON.COM > SUPPORT > DOCKING DRIVERS
HDMI
(Optional)
Serial
USB-C
(3.0)
USB-A
(2.0)
2x USB-A
(3.0)
Ethernet
Power Input
(19v, 6a max)
TRI-RF
(WWAN, GPS,WLAN)
(Optional)
VESA 75mm Hole Pattern
(1/4-20 Mounting Hardware Provided)
Recommended Torque = 25 in/lbs
Serial Label
3 / 7

Specyfikacje produktu

Marka: Gamber-Johnson
Kategoria: Kołyska/stacja dokująca
Model: 7160-1982

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Gamber-Johnson 7160-1982, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje Kołyska/stacja dokująca Gamber-Johnson

Gamber-Johnson

Gamber-Johnson 7160-1982 Instrukcja

19 Grudnia 2024
Gamber-Johnson

Gamber-Johnson 7160-1084 Instrukcja

1 Października 2024
Gamber-Johnson

Gamber-Johnson 7160-1418 Instrukcja

1 Października 2024
Gamber-Johnson

Gamber-Johnson 7160-1368 Instrukcja

1 Października 2024
Gamber-Johnson

Gamber-Johnson 7170-0670 Instrukcja

1 Października 2024
Gamber-Johnson

Gamber-Johnson 7160-0581 Instrukcja

1 Października 2024
Gamber-Johnson

Gamber-Johnson 7160-0760 Instrukcja

1 Października 2024
Gamber-Johnson

Gamber-Johnson 7170-0798 Instrukcja

1 Października 2024
Gamber-Johnson

Gamber-Johnson 7160-0880 Instrukcja

1 Października 2024
Gamber-Johnson

Gamber-Johnson 7160-0907 Instrukcja

1 Października 2024

Instrukcje Kołyska/stacja dokująca

Najnowsze instrukcje dla Kołyska/stacja dokująca

Sony

Sony Clié PEGA-UC600 Instrukcja

22 Grudnia 2024
Sony

Sony Clié PEGA-UC500 Instrukcja

22 Grudnia 2024
JBL

JBL On Call 5310 Instrukcja

20 Grudnia 2024
SMK-Link

SMK-Link VP3420 Instrukcja

17 Grudnia 2024
SMK-Link

SMK-Link VP3650V2 Instrukcja

17 Grudnia 2024
Xcellon

Xcellon MDS-MBP7S Instrukcja

17 Grudnia 2024
Vorago

Vorago KSP-700 Instrukcja

17 Grudnia 2024
Digitus

Digitus DA-70918 Instrukcja

16 Grudnia 2024
Digitus

Digitus DA-70915 Instrukcja

16 Grudnia 2024
Digitus

Digitus DA-70916 Instrukcja

16 Grudnia 2024