Instrukcja obsługi Equity Night Vision 31302

Equity zegar Night Vision 31302

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Equity Night Vision 31302 (1 stron) w kategorii zegar. Ta instrukcja była pomocna dla 3 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/1
Two Year Limited Warranty (U.S.A.)
Equity products are warranted for two years from the date of consumer purchase
against defects in material and workmanship. During this period such defects will be
repaired, or the product will be replaced at Equitys option, without charge. This
warranty does not cover damage caused by misuse or negligence. ALL IMPLIED
WARRANTIES, INCLUDING BUT NOT LIMITED TO IMPLIED WARRANTIES OR FITNESS AND
MERCHANTABILITY, ARE LIMITED IN DURATION T0 A PERIOD ENDING TWO YEARS FROM
DATE OF PURCHASE . Some states do not allow limitations on how long an implied
warranty lasts so the above limitation may not apply to you. This warranty gives you
specific legal rights and you may also have other rights which vary from State to State.
If your product is not working properly, please send:
- the product
- a letter explaining the problem
- and $5.00 for postage and handling to :
Equity by La Crosse
Warranty Department
2830 26th St. S.
La Crosse, WI 54601
Made in China Printed in China
Please read this before operating your clock
LCD TRAVEL ALARM CLOCK
Model 31302
Using The Backlight
* Press the button to activate the display backlight . The backlight will stay on for 5 secondsSNOOZE
each time it is pressed.
Battery Warning
Clean the battery contacts and also those of the device prior to battery installation. Follow the polarity
(+) and (-) when inserting battery.
FCC INFORMATION:
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there
is no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined
by turning the equipment off and on, the user is encouraged to try to correct the interference by one
or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver
is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Caution: Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired opera-
tion.
Warning: Changes or modications to this unit not expressly approved by the party responsible
for compliance could void the user's authority to operate the equipment
Battery Installation
* The battery compartment is located on the bottom of the clock. Remove the battery cover
and insert two “AAA” batteries according to the polarity indication inside the battery
compartment. Replace the battery cover. (Batteries not included)
Plesae help in preservation of the environment and return used batteries to an authorized depot.
Remove the battery from the clock if you do not intend to use for an extended period of time.
AL / TIME / AL ON / AL OFF Set Switch
Snooze Indicator
Setting The Time
* Slide the set switch to position. AL / TIME /AL ON /AL OFF TIME
* Press button to set the correct hour. The PM inducator will light HOUR
when the hour is advanced into the PM time.
* Press button to set the correct minute.MIN
* Slide the set switch to after set your time. AL / TIME /AL ON /AL OFF AL OFF
Setting The Alarm Time
* Slide the set switch to position.AL / TIME /AL ON /AL OFF AL
* Press button to set the correct hour. The PM indicator will lightHOUR
when the hour is advanced into the PM time.
* Press button to set the correct minute.MIN
* Slide the set switch to after set your alarm time.AL / TIME /AL ON /AL OFF AL OFF
Using The Alarm
* Slide the set switch to position. The alarm indicator will light up.AL / TIME /AL ON /AL OFF AL ON
* Slide the set switch to the position to turn the alarm OFF.AL / TIME /AL ON /AL OFF AL OFF
The alarm indicator will disappear.
Using The Snooze
* Pressing the button when the alarm sounds will stop the alarm and SNOOZE
the alarm will sound again in 5 minutes.
www.equitybylacrosse.com/support www.equitybylacrosse.com/support
TIME
AL AL OFF
AL ON
H O U R
P M
SNOOZE / LIGHT
PM
Indicator
Alarm
Indicator
Time Display
SNOOZE Button
HOUR Button
MIN Button


Specyfikacje produktu

Marka: Equity
Kategoria: zegar
Model: Night Vision 31302

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Equity Night Vision 31302, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje zegar Equity

Equity

Equity 40222S Instrukcja

16 Września 2024
Equity

Equity 14080 Instrukcja

14 Września 2024
Equity

Equity 75907 Instrukcja

14 Września 2024
Equity

Equity 20078 Instrukcja

11 Września 2024
Equity

Equity 14075 Instrukcja

11 Września 2024
Equity

Equity 75906 Instrukcja

10 Września 2024
Equity

Equity 24014 Instrukcja

9 Września 2024
Equity

Equity 30401 Instrukcja

7 Września 2024

Instrukcje zegar

Najnowsze instrukcje dla zegar