Instrukcja obsługi Equity 75907
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Equity 75907 (1 stron) w kategorii zegar. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek
Strona 1/1
Please read this before operating your clock
1.8” LED Display Quick-Set Alarm Clock
Model 75905 / 75907
Features
• Large 1.8” LED Display
• Quick-Set numeric keys for time & alarm
• Extra Loud or Normal Alarm Volume Select
• LED Display Dimmer control
• 9 minute snooze
• Requires Two “AAA” Batteries For Back-Up (Not Included)
• AC 120V, 60Hz, ETL approved
Power Supply
* Begin by plugging in the power cord into a standard household outlet.
Setting The Time
* After powering your clock, slide the TIME-LOCK-ALARM set switch to TIME set position.
* The hour digits will ash indicating it needs to be set. Press numeric buttons to enter hour digits.
The LED display will show the numbers that you have entered.
* After 4 seconds, the minute digits will ash indicating it needs to be set. Press numeric buttons to
enter minute digits. The LED display will show the numbers that you have entered.
* Press RESET button to change your setting. Press PM button to show pm time.
Slide TIME-LOCK-ALARM set switch to LOCK after time was set.
* Press RESET button to return to hour setting.
Time-Lock-Alarm Set Switch
Dimmer Switch Alarm Hi/Lo/Off Switch
Snooze Button
PM Light
Indicator
Alarm Light
Indicator
Time Display
Speaker Holes
PM
AL
HI TIME HI
LOCK LO
ALARM OFF
PM
Reset
DIMMER ALARM
LO 123
45 6
7890
SNOOZE
www.equitybylacrosse.com/support
Two Year Limited Warranty (U.S.A.)
Equity products are warranted for two years from the date of consumer purchase
against defects in material and workmanship. During this period such defects will be
repaired, or the product will be replaced at Equity’s option, without charge. This
warranty does not cover damage caused by misuse or negligence. ALL IMPLIED
WARRANTIES, INCLUDING BUT NOT LIMITED TO IMPLIED WARRANTIES OR FITNESS AND
MERCHANTABILITY, ARE LIMITED IN DURATION T0 A PERIOD ENDING TWO YEARS FROM
DATE OF PURCHASE . Some states do not allow limitations on how long an implied
warranty lasts so the above limitation may not apply to you. This warranty gives you
specific legal rights and you may also have other rights which vary from State to State.
CA UTI ON : TO RE DUCE TH E
RISK OF EL EC TRIC SHOCK,
D O N O T R E M O V E C O V E R
( O N B A C K ) . N O U S E R -
S E R V I C E A B L E P A R T S
INSI DE . REF E R S ER VI C IN G
T O Q U A L I F I E D S E R V I C E
PERSONNEL.
Th e e xc la ma ti on
po i nt wi t hi n t he
triangle is a warning
sign alerting you of
impo rtant instruc-
tions accompanying
the product.
The lightning flash
a n d ar r o wh e a d
within the triangle
is a warni ng sign
a le r t i n g y o u o f
"dangerous voltage"
inside the product.
If your product is not working properly, please send:
- the product
- a letter explaining the problem
- and $5.00 for postage and handling to :
Equity by La Crosse
Warranty Department
2830 26th St. S.
La Crosse, WI 54601
Made in China Printed in China
ATTENTION : POUR PRÉVENIR LES CHOCS ÉLECTRIQUES NE
PAS UTILISER CETTE FICHE POLARISÉE AVEC UN
PROLONGATEUR, UNE PRISE DE COURANT, OU UNE AUTRE
SORTIE DE COURANT SAUF SI LES LAMES PEUVENT ETRE
DÉCOUNVERT.
INSÉRÉES À FOND SANS EN LAISSER AUCUNE PARTIE À
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRICAL SHOCK, DO NOT EXPOSE
THIS APPLIANCE TO RAIN OR MOISTURE.
Caution: To prevent electrical shock do not use this (polarized) plug with an
extension cord, receptacle, or other outlet unless the blades can be fully inserted
to prevent blade exposure.
www.equitybylacrosse.com/support
Setting The Alarm Time
* Slide the TIME-LOCK-ALARM set switch to ALARM set position.
* The hour digits will ash indicating it needs to be set. Press numeric buttons to enter hour digits.
The LED display will show the numbers that you have entered.
* After 4 seconds, the minute digits will ash indicating it needs to be set.
Press numeric buttons to enter minute digits. The LED display will show the numbers that you
have entered.
* Press RESET button to change your setting. Press PM button to show pm time.
Slide TIME-LOCK-ALARM set switch to LOCK after Alarm was set.
Using The Alarm
* Slide the HI/LO/OFF HIalarm switch to position for loud alarm sound.
The alarm indicator will be lit.
* Slide the HI/LO/OFF alarm switch to LO position for regular alarm sound.
The alarm indicator will be lit.
* Slide the HI/LO/OFF OFF alarm switch to position to turn OFF alarm.
The alarm indicator will turn off.
Using The Snooze
* Press the button when the alarm sounds to stop the alarm sound. SNOOZE
The alarm will sound again in nine minutes.
* The snooze function can be repeated.
* Slide the HI/LO/OFF alarm switch to OFF position to turn off the alarm.
Using The Display Dimmer Switch
* Slide the HI/LO HI display dimmer switch to position for brighter display.
* Slide the HI/LO display dimmer switch to LO position for normal display
Battery Backup
* Insert two “AAA” batteries into the battery compartment at the back of the clock.
If the power is interrupted. The battery will keep the alarm and time settings until
the power is restored. The LED display will not light-up but the alarm will sound at
the preset alarm time. If there is no battery installed but the power is interrupted,
the display will ash at 12:00 and the time and alarm need to be set again.
Battery Instruction
1. Always purchase the correct size and grade of battery most suitable for the intended use.
2. Replace all batteries of a set at the same time.
3. Clean the battery contacts and also those of the device prior to battery installation.
4. Ensure the batteries are installed correctly with regard to polarity ( + and - ).
5. Remove the batteries from equipment which is not to be used for an extended period of time.
6. Remove used batteries promptly.
FCC INFORMATION:
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there
is no guarantee that interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be determined
by turning the equipment off and on, the user is encouraged to try to correct the interference
by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver
is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Caution: Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
Warning: Changes or modications to this unit not expressly approved by the party responsible
for compliance could void the user's authority to operate the equipment
1. Read Instructions-All the safety and operating instructions should be read before the
appliance is operated.
2. Retain Instructions - The safety and operating instructions should be retained for future
reference.
3. Water and Moisture - The appliance should not be used near water - for example, near a
bathtub, washbowl, kitchen sink, laundry tub, in a wet basement, or near a swimming pool,
and the like.
4. Ventilation - The appliance should be situated so that its location or position does not interfere
with its proper ventilation, For example, the appliance should not be situated on a bed, sofa,
rug, or similar surface that may block the ventilation openings,or, place in a built-in installa-
tion, such as a bookcase or cabinet that may impede the ow of air through the ventilation
openings.
5. Heat - The appliance should be situated away from heat sources such as radiators, heat
registers, stoves, or other appliances (including ampliers) that produce heat.
6. Power Sources-The appliance should be connected to a power supply only of the type
described in the operating instructions or as marked on the appliance.
7. Grounding or Polarization-The precaution should be taken so that the grounding or polariza-
tion means of an appliance is not defeated.
8. Power-Cord Protection - Power supply cords should be routed so that they are not likely to be
walked on or pinched by items placed upon or against them, paying particular attention to
cords at plugs, convenience receptacles, and the point where they exit from the appliance.
9. Cleaning - The appliance should be cleaned only as recommended by the manufacturer.
10. Object and Liquid Entry - Care should be taken so that objects do not fall and liquids are not
spilled into the enclosure through openings.
11. Damage Requiring Service - The appliance should be serviced by qualied service personnel
when:
A. The power -supply cord or the plug has been damaged; or
B. Objects have fallen, or liquid has been spilled into the appliance; or
C. The appliance has been exposed to rain; or
D. The appliance does not appear to operate normally or exhibits a marked change in
performance; or
E. The appliance has been dropped, or the enclosure damaged.
12. Servicing - The user should not attempt to service the appliance beyond that described in the
operating instructions. All other servicing should be referred to qualied service. personnel.
13. Do not mix old and new batteries,
Do not mix alkaline, standard (carbon-zinc), or rechargeable (ni-cad, ni-mh, etc.)
Safety Instructions
www.equitybylacrosse.com/support www.equitybylacrosse.com/support
Specyfikacje produktu
| Marka: | Equity |
| Kategoria: | zegar |
| Model: | 75907 |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z Equity 75907, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje zegar Equity
16 Września 2024
14 Września 2024
14 Września 2024
9 Września 2024
6 Września 2024
Instrukcje zegar
- zegar Ikea
- zegar Braun
- zegar Lenovo
- zegar Livoo
- zegar Geemarc
- zegar Panasonic
- zegar Muse
- zegar Nedis
- zegar Marquant
- zegar Casio
- zegar Citizen
- zegar ECG
- zegar Krontaler
- zegar TFA
- zegar Auriol
- zegar Techno Line
- zegar Seiko
- zegar La Crosse Technology
- zegar Velleman
- zegar ART
- zegar Lorus
- zegar Invicta
- zegar Tronic
- zegar Oregon Scientific
- zegar Elro
- zegar Hama
- zegar Taylor
- zegar Hager
- zegar Trevi
- zegar Alecto
- zegar Zenith
- zegar ADE
- zegar Vitek
- zegar Fysic
- zegar Amplicom
- zegar Ascot
- zegar Ecom
- zegar United Office
- zegar Karlsson
- zegar Cresta
- zegar GlobalTronics
- zegar Jacob Jensen
- zegar Dugena
- zegar AcuRite
- zegar Fisher Price
- zegar Technoline
- zegar Audiovox
- zegar Davis
- zegar Balance Time
- zegar Valcom
- zegar Chacon
- zegar Zuiver
- zegar Irox
- zegar Konig
- zegar Glunz
- zegar Dexford
- zegar Ranex
- zegar IHome
- zegar BBrain
- zegar La Crosse
- zegar Sempre
- zegar Digi-tech
- zegar Global Tronics
- zegar ASA
- zegar TFA Dostmann
- zegar Kogan
- zegar Antelope Audio
- zegar Mebus
- zegar DB Technologies
- zegar Focus Electrics
- zegar Pyramid
- zegar Gingko
- zegar Weinberger
- zegar CyberData Systems
- zegar Electronics International
- zegar Antelope
Najnowsze instrukcje dla zegar
11 Października 2024
9 Października 2024
8 Października 2024
8 Października 2024
8 Października 2024
8 Października 2024
8 Października 2024
8 Października 2024
8 Października 2024
8 Października 2024