Instrukcja obsługi EnGenius EWS357-FIT


Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla EnGenius EWS357-FIT (11 stron) w kategorii Punkt dostępu. Ta instrukcja była pomocna dla 3 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/11
Quick Start Guide
EWS357-FIT
EWS357-FIT Quick Start Guide
EnGenius Fit Wi-Fi 6 2×2 Indoor Wireless
Access Point
Quick Start Guide
Introduction
This Quick Start Guide is designed to guide you through the
installation of the Fit 2x2 access point, model EWS357-FIT,
including hardware mounting and configuration.
FIT Managed Indoor
Access Point
Mounting Kit
Ceiling Mount Base
(9/16” T-Rail)
Spacer
Ceiling Mount Base
(15/16” T-Rail)
Product Card
Package Contents
Wi-Fi 6 technology for high-performance Wi-Fi in high-density,
multi-device environments.
Two spatial streams support up to 1,200 Mbps (5GHz) & 574
Mbps (2.4GHz).
Multiple applications for cloud and on premises solutions.
Model: EWS357-FIT
EWS357-FIT Quick Start Guide
System Requirements
Google Chrome (57.0.2987.110 and later)
Microsoft Edge (80.0.361.103 and later)
Mozilla Firefox (52.0 and later)
Web Browser
Hardware Overview Reset Button:
Reset to default: Press and hold the reset button for over 60
seconds, and the LED (PWR) will start Fast Flashing (0.2 sec).
Then, the device will be reset to factory default settings.
Power LED 5GHz LED
2.4GHz LEDLAN Port LED
Kensington
Security Slot
1Gbps LAN
(PoE, 802.3af/at)
Power
Connector
Reset
Button
LEDs
STATUS LED COLOR LED BEHAVIOR
Connecting to the management
(FitXpress/FitController)
PWR (Orange) Flashing (0.5 Sec.)
Management Connected
(FitXpress/FitController/Standalone)
PWR (Orange) Solid On
LAN Connected LAN (Blue) Solid On
LAN Transmitting LAN (Blue) Flashing
2.4GHz Radio On 2.4GHz (Blue) Solid On
2.4GHz Transmitting 2.4GHz (Blue) Flashing
5GHz Radio On 5GHz (Blue) Solid On
5GHz Transmitting 5GHz (Blue) Flashing
Firmware Upgrading PWR LAN 2.4GHz 5GHz Flashing (0.5 Sec.)
Reset to Default PWR (Orange) Fast Flashing (0.2 Sec.)
AP Location Mode PWR LAN 2.4GHz 5GHz Flashing (1.5 Sec. on ->0.5 Sec. off)
EWS357-FIT Quick Start Guide
Hardware Mounting
Ceiling Mount (T-Rail)
The access point can be mounted on the Ceiling and Wall.
Please perform the following steps to install successfully.
1. Slide the into the designated slot on the of the Access Point. Ceiling Mount Base access point slot
Celing Mount Base
Access Point
2. Slightly hook the onto the ceiling mount bracket T-Rail until you hear a click.
T-Rrail
Access Point


Specyfikacje produktu

Marka: EnGenius
Kategoria: Punkt dostępu
Model: EWS357-FIT

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z EnGenius EWS357-FIT, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje Punkt dostępu EnGenius

Instrukcje Punkt dostępu

Najnowsze instrukcje dla Punkt dostępu