Instrukcja obsługi Edifier W100T


Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Edifier W100T (29 stron) w kategorii Zatyczka do uszu. Ta instrukcja była pomocna dla 11 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/29
True Wireless Earbuds Headphon es
Manual
W100T
Pairing
1. Taken out of the case. Red and Blue LED will blink rapidly.
2. Select "EDIFIER W100T" in your device setting to connect.
Note:
For subsequent use, the earbuds will auto-connect to device used last time.
IndicatorIndicator
EN
Power ON/OFF
1. Power ON when taken out of the case.
2. Power OFF when placed in the case.
Reset
1. Taken out of the case.
2. Disconnected to any Bluetooth devices. Press and hold the touch panel on either earbud for around 8s
and wait until Blue LED blinks rapidly to reset and turn off. If the left and right earbuds are connected,
the other side will reset and turn off either)
3. Placed in the case and taken out of the case again.
4. Select "EDIFIER W100T" in your device setting to connect.
Blue LED lit for 1s
8s 8s
IndicatorIndicator
Charge
Left & Right connection (Connect to another W100T earbuds)
x5 x5
IndicatorIndicator
x2 x2
IndicatorIndicator
1. Earbuds must disconnect to any devices. Respectively tap 5 times the touch panel on both earbuds to
cancel Left & Right connection. Blue LED will be steady lit. Upon connection is canceled, place the
earbuds back in the case.
2. Taken out of the case and disconnected to any devices. Respectively tap 2 times the touch panel on both
earbuds to start Left & Right connecting. Blue LED will blink rapidly.
3. Upon connection is successful select "EDIFIER W100T" in your device setting to connect.
Earbuds
1. When hearing low battery prompt tone, please place the earbuds in the
case for charging.
2. Red LED is steady lit when charging and off when fully charged.
Charging case
1. Please connect the case to power source with the included Type-C
charging cable for charging.
2. Red LED is steady lit when charging and off when fully charged.
Red LED Input: 5V 200mA(Earbuds)
5V 1A(Charging case)


Specyfikacje produktu

Marka: Edifier
Kategoria: Zatyczka do uszu
Model: W100T

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Edifier W100T, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje Zatyczka do uszu Edifier

Edifier

Edifier TWS NB2 Instrukcja

31 Grudnia 2025
Edifier

Edifier X6 Instrukcja

31 Grudnia 2025
Edifier

Edifier STAX SPIRIT S10 Instrukcja

8 Października 2024
Edifier

Edifier W260NC Instrukcja

4 Października 2024
Edifier

Edifier X5 Pro Instrukcja

4 Października 2024
Edifier

Edifier X5 Lite Instrukcja

29 Września 2024
Edifier

Edifier W100T Instrukcja

27 Września 2024

Instrukcje Zatyczka do uszu

Najnowsze instrukcje dla Zatyczka do uszu