Instrukcja obsługi Draytek VigorNIC 132

Draytek Karta sieciowa/adapter VigorNIC 132

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Draytek VigorNIC 132 (8 stron) w kategorii Karta sieciowa/adapter. Ta instrukcja była pomocna dla 8 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/8

I-

-E

Quick Start Guide

Version: 1.1

Date: April 29, 2016

Warranty

We warrant to the original end user (purchaser) that the modem will be free from any defects in workmanship or materials for a period of two (2)

years from the date of purchase from the dealer. Please keep your purchase receipt in a safe place as it serves as proof of date of purchase.

During the warranty period, and upon proof of purchase, should t ilure due to faulty workmanshihe product have indications of fa p and/or materials,

we will, at our discretion, repair or replace the defective products or components, without charge for either parts or labor, to whatever extent we

deem necessary tore-store the product to proper operating condition. Any replacement will consist of a new or re-manufactured functionally

equivalent product of equal value, and will be offered solely at our discretion. This warranty will not apply if the product is modified, misused,

tampered with, damaged by an act of God, or subjected to abnormal working conditions. The warr r licensed anty does not cover the bundled o

software of other vendors. Defects which do not significantly affect the usability of the product will not be covered by the warranty. We reserve the

right to revise the manual and online documentation and to make changes from time to time in the contents hereof without obligation to notify any

person of such revision or changes.

European Community Declarations

Manufacturer: DrayTek Corp.

Address: No. 26, Fu Shing Road, HuKou Township, HsinChu Industrial Park, Hsin-Chu, Taiwan 303

Product: VigorNIC 132 Series

DrayTek Corp. declares that VigorNIC 132 series is in compliance with the following essential requirements and other relevant provisions of

R&TTE Directive 1999/5/EEC.

The product conforms to the requirements of Electro-Magnetic Compatibility (EMC) Directive 2004/108/EC by complying with the requirements set

forth in EN55022/Class B and EN55024/Class B.

The product conforms to the requirements of Low Voltage (LVD) Directive 2006/95/EC by complying with the requirements set forth in EN60950-1.

Federal Communication Commission Interference Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits

are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can

radiate radio frequency energy and, if not installed and used in ce to radio accordance with the instructions, may cause harmful interferen

communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful

interference to radio or television recept he equipment off and on, the user is encouraion, which can be determined by turning t ged to try to correct

the interference by one of the following measures:

 Reorient or relocate the receiving antenna.

 Increase the separation between the equipment and receiver.

 Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

 Consult the dealer or an experienced radio/TV technician for help.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and

(2) This device may accept any interference received, including interference that may cause undesired operation.

This product is designed for the DSL network throughout the EC region



Package Content

Quick Start Guide Network Card

and

Spare short

bracket

RJ-11 Cable

(for Annex A)

RJ-45 Cable

(for Annex B)

Note: WAN2 is available for SFP connection (for VigorNIC 132F

only). However, the SFP module is not included in the

package.



Customer Service

Internet inaccessibility may be caused by internal ﬁrewall of operation

system or anti-virus programs, please disable the services temporally

when you suﬀered.

If the network cannot work correctly after trying many efforts, please

contact your dealer for further help right away. For any questions, please

feel free to send e-mail to support@draytek.com.

 Descriptions of Components

VigorNIC 132F

VigorNIC 132

LED Status Explanation

On The Fiber WAN is connected (VigorNIC 132F).

The Ethernet WAN connection is ready

(VigorNIC 132).

WAN2

Blinking It will blink while transmitting data.

On DSL connection synchronized. DSL

Blinking Quickly: DSL is handshaking.

Slowly: DSL tries to synchronize.

Off The system is not ready or is failed. ACT

Blinking The system is ready and can work normally.

Interface Description

Factory

Reset Restore the default settings. Usage: Turn on the modem.

Press the button and keep for more than 10 seconds.

Then the modem will restart with the factory default

configuration.

WAN2 SFP Port - Connector for accessing the Internet via fiber

connection. (VigorNIC 132F)

Ethernet Port – Connector for accessing the Internet via

fiber connection. (VigorNIC 132)

DSL Connecter for accessing the Internet through

VDSL2/ADSL2/2+. (VigorNIC 132)

Specyfikacje produktu

Marka:	Draytek
Kategoria:	Karta sieciowa/adapter
Model:	VigorNIC 132

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Draytek VigorNIC 132, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą

Twoje imię*

Twój email*

Napisz tutaj swoje pytanie

Instrukcje Karta sieciowa/adapter Draytek

Draytek VigorNIC 132 Instrukcja

22 Sierpnia 2024

Instrukcje Karta sieciowa/adapter

Najnowsze instrukcje dla Karta sieciowa/adapter

ZyXEL WBE510D Instrukcja

14 Stycznia 2025

StarTech.com 107B-USB-HDMI Instrukcja

14 Stycznia 2025

StarTech.com ST1000SPEXD4T Instrukcja

8 Stycznia 2025

Edimax EU-4307 V2 Instrukcja

29 Grudnia 2024

StarTech.com O1210I-NETWORK-CARD Instrukcja

28 Grudnia 2024

Micro Connect MC-POEADAPTER-USB-C Instrukcja

27 Grudnia 2024

Lindy 43237 Instrukcja

27 Grudnia 2024

Lindy 43247 Instrukcja

27 Grudnia 2024

Akasa AK-PCCE25-01 Instrukcja

26 Grudnia 2024

OpenVox AE2410E40 Instrukcja

26 Grudnia 2024