Instrukcja obsługi DoorBird D2101V

DoorBird Niesklasyfikowane D2101V

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla DoorBird D2101V (126 stron) w kategorii Niesklasyfikowane. Ta instrukcja była pomocna dla 11 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/126
VERSION 2.5, MIN. HW 1.71
Page 31-46
Manuel d´installation
Interphone vidéo IP
Série D21x
Página 47-61
Manual de Instalación
Videoportero IP
Serie D21x
Page 2-15
Installation Manual
IP Video Door Station
D21x Series
Seite 16-30
Installationsanleitung
IP Video Türstation
D21x Serie
D21x
2
INSTALLATION MANUAL
Read these instructions carefully before starting to
use any components. Keep the manual so you can
refer to it at a later date if required. If you hand over
the device to other persons for use, please hand over
the operating manual as well.
You can always find the most up-to-date version
of the installation manual on www.doorbird.com/
support
To make things easier we use the term “device” for
the product “IP Video Door Station” and “mobile
device” for a smartphone or tablet.
Liability
Every care has been taken in the preparation of this
document. Please inform Bird Home Automation
GmbH of any inaccuracies or omissions. Bird Home
Automation GmbH cannot be held responsible for any
technical or typographical errors and reserves the right
to make changes to the product and manuals without
prior notice. Bird Home Automation GmbH makes
no warranty of any kind with regard to the content
of this document, including, but not limited to, the
implied warranties of merchantability and fitness for
a particular purpose. Bird Home Automation GmbH
shall neither be liable nor responsible for incidental
or consequential damages in connection with the
furnishing, performance or use of this material. This
product is only to be used for its intended purpose.
Equipment Modifications
This equipment must be installed and used in strict
accordance with the instructions given in the user
documentation. This equipment contains no compo-
nents that require service by the user. Unauthorized
equipment changes or modifications will invalidate
all applicable regulatory certifications and approvals.
Symbols used
Caution: Indicates a hazardous situation
which, if not avoided, could result in minor
or moderate injury.
Danger: Indicates a hazardous situation
which, if not avoided, will result in death or
serious injury.
Warning: Indicates a hazardous situation
which, if not avoided, could result in death
or serious injury.
Notice: Indicates a situation which, if not
avoided, could result in damage to property.
Note: Indicates useful information which
helps in getting the most out of the product.
N OT I CE
Important: Indicates significant information
which is essential for the product to function
correctly.
Hazard information
• Mounting, installation and servicing work on
electrical devices may only be performed by
a qualified eletrician. Failure to observe this
regulation could result in the risk of serious
damage to health or fatal injury due to electric
shocks.
• Devices with 110-240 V connection: The device
may only be connected to an easily accessible
power socket outlet. The mains adapter must
be pulled out if a hazard occurs.
• For power supply, only use the original plug-
in mains adapter delivered with the device or
a recommended PoE-Switch/PoE-Injector as
specified in this manual.
• Because of electrostatic charging, direct
contact with the circuit board can result in
destruction of the device. Direct contact with
the circuit board must therefore be avoided
at any time.
• Observe the EN 60065 resp. EN 60950 resp.
EN 62368 standard.
• Do not use the device if there are signs of
damage to the housing, control elements
or connecting sockets, for example, or if it
demonstrates a malfunction. If you have any
doubts, please have the device checked by
an authorized expert.
• Do not open the device. This voids the
warranty of the device. The device does not
contain any parts that can be maintained by
the user. In the event of an error, please have
the device checked by an authorized expert.
• For safety, approval and licensing reasons (CE/
FCC/IC etc.), unauthorized change and/or
modification of the device is not permitted.
• The device is not a toy; do not allow children
to play with it. Do not leave packaging material
lying around. Plastic films/bags, pieces of
polystyrene, etc. can be dangerous in the
hands of a child.
• Always lay cables in such a way that they do
not become a risk to people and domestic
animals.
• Voltage is applied to parts within the
equipment. Do not touch any parts that are
not associated with the installation, wiring, or
connection. Electric shock could result.
• On devices which are not marked as weather-
proof: Keep the device away from water or
any other liquid.
• Do not install or make any wire terminations
while power supply is plugged in. It can cause
eletric shock or damage to the device.
WARNING
ENGLISH
3
• Before turning on power, make sure wires are
not crossed or shorted. If not, fire or eletric
shock could result.
• High voltage may be present internally. Do not
open the device. Electric shock could result.
• The device is not of explosion-proof. Do
not install or use near gases or flammable
materials. Fire or explosion could result.
• Do not install two power supplies in parallel
to a single input. Fire or damage to the device
could result. Be sure to connect a single power
supply to the device.
• Do not connect any terminal on the device to
an AC power line. Fire or electric shock could
result.
• Keep AC cord from being marred or crushed.
If the AC cord is fractured, fire or electric shock
could result.
• Do not plug or unplug with wet hands. Electric
shock could result.
• Do not put any metal or flammable material
into the device. Fire, electric shock, or device
trouble could result.
• Existing wiring may contain high voltage AC
electricity. Damage to the device or electric
shock could result. Wiring and installation
must be done by a qualified eletrician.
• When mounting the device on a wall or
ceiling, install the device in a convenient
location, but not where it could be jarred or
bumped. Injury could result.
• On devices with ground terminals, connect to
an earth ground. Otherwise fire or malfunction
could result.
• On devices with plastic or real glass, do not put
high pressure on the glass. If fractured, injury
could result.
• On devices with LCD, if LCD is punctured, do
not allow contact with the liquid crystal inside.
Injury could result. If necessary, gargle your
mouth and clean your eyes or skin with clear
water for at least 15 minutes and consult your
doctor.
• Do not put anything on the device or cover
the device with cloth, silicone, glue, coating,
separate covering etc. Fire or device issues
could result.
• Do not install the device in any of the following
locations. Fire, electric shock, or device trouble
could result.
Places under direct sunlight or places near
heating equipment that varies in temperature.
Places subject to dust, oil, chemicals, hydrogen
sulfide (hot spring).
Places subject to moisture and humidity
extremes, such as bathrooms, cellars,
greenhouses, etc.
WARNING
Places where the temperature is very low, such
as inside a refrigerated area or in front of an air
conditioner.
Places subject to steam or smoke (e.g. near
heating or cooking surfaces).
Where noise generating devices such as
dimmer switches or inverter electrical
appliances are closeby.
Locations subject to frequent vibration or
impact.
• On devices with intercom, be sure to perform
a call test with low audio volume on both
intercom devices. A sudden call etc. may arrive
causing for example damage to your ear.
• If the device does not operate properly, unplug
the power supply.
• All devices which are not marked as weather-
proof are designed for indoor use only. Do not
use outdoor.
• On devices which are marked weather-proof:
Do not spray with high-pressure water. Device
issues could result.
• We do not assume any liability for damage to
property or personal injury caused by improper
use or the failure to observe the
• hazard information. In such cases, any claim
under warranty ceases. For consequential
damages, we assume no liability!
Safety instructions
• The device shall be used in compliance with
local laws and regulations.
• Store the device in a dry and ventilated
environment.
• Avoid exposing the device to shocks or heavy
pressure.
• Do not install the device on unstable brackets,
surfaces or walls. Make sure the material is
strong enough to support the weight of the
device.
• Use only applicable tools when installing the
device. Using excessive force with tools could
cause damage to the device.
• Do not use chemicals, caustic agents, or aerosol
cleaners.
• Use a clean dry cloth for cleaning.
• Use only accessories that comply with technical
specification of the device. These can be
provided by Bird Home Automation GmbH.
• Use only spare parts provided by or
recommended by Bird Home Automation GmbH.
• Do not attempt to repair the device by yourself.
Contact Bird Home Automation GmbH for
service matters.
• Keep the device more than 1 m (3.3‘) away from
microwave, radio, TV, wireless router and any
other wireless devices.
N OT I CE
4
• On devices with intercom or built-in speaker
or built-in microphone or signal transmission
functions, keep the wires more than 30 cm
(12‘‘) away from AC 100-240 V wiring. AC
induced noise and/or device malfunction
could result.
• Install the device in an area that will be
accessible for future inspections, repairs and
maintenance.
• If the device is used close to a cellular phone,
the device may malfunction.
• The device can be damaged if dropped.
Handle with care.
• The device turns inoperative during power
failure.
• On devices with intercom or built-in speaker
or built-in microphone, in areas where cellular
or Radio / TV broadcasting station antennas
are closeby, the device may be affected by
radio frequency interference.
• On devices with LCD screen, it must be noted
in advance that the LCD panel, though
manufactured with very high precision
techniques, inevitably will have a very small
portion of its picture elements always lit or
not lit at all. This is not considered a device
malfunction.
• On devices with intercom, due to the
environmental sound around the device, it
may hinder smooth communication, but
this is not a malfunction.
• On devices with Username/Password, the
Username/Password to access the device is
the customer‘s responsibility. Make sure to
use a password that cannot be easily guessed
by a third party. We recommend that you
change the Password on a regular basis.
• We will, under no circumstances, be liable
for damage that occurs due to failures in
power supply, network equipment or terminal
devices; failures due to Internet providers
and cellular network providers; failures such
as disconnected lines and other losses in
communication, which makes it impossible to
provide this service as well as in any way delay
this service due to any other causes outside
of our responsibility; or if an error or missing
data occurs during transmission.
Warranty Information
For information about the device warranty, see
www.doorbird.com/warranty
Transportation
When transporting the device, use the
original packaging or equivalent to prevent
damage to the device.
N OT I CE
Information on disposal for users of waste
electrical & electronic equipment (private
household)
This symbol on the products and/or accompanying
documents means that used electrical and electronic
products should not be mixed with general household
waste. For proper treatment, recovery and recycling,
please take these products to designated collection
points, where they will be accepted an a free of charge
basis. Alternatively, in some countries you may be able
to return your products to your local retailer upon the
purchase of an equivalent new product. Disposing
of this product correctly will help to save valuable
resources and prevent any potential negative effects
on human health and the environment which could
otherwise arise from inappropriate waste handling.
Please contact your local authority for further details
of your nearest designated collection point. Penalties
may be applicable for incorrect disposal of this waste,
in accordance with national legislation.
Information on disposal in other countries outside
the European Union
This symbol is only valid in the European Union. If you
wish to discard this product, please contact your local
authorities or dealer and ask for the correct method
of disposal.
ENGLISH
5
1) Main Electrical Unit
2) Yellow cable for
call button
Connected to
the illuminated call
button with
nameplate
3) Red cable for Module
Port 1(unused)
INSIDE
5
6
7
1
2
3
4
DEVICE EXAMPLE WITH  CALL BUTTON
1) HDTV Video
2) Light Sensor
For night vision mode
3) Security screws
4) Motion Sensor
5) Illuminated
call button with
nameplate
The illumination is
also acting as
Diagnostic LED(s).
Front
1
2
3
4
5
6
7
8
9
6) Night Vision LEDs
7) Microphone
8) Loudspeaker
9) RFID Reader
4) Green cable for
Module Port 2
(unused)
5) Screw connection
terminal
6) LAN/PoE jack
7) Nylon cord
To secure the front
panel during assembly
DEVICE EXAMPLE WITH  AND MORE CALL BUTTONS
Front 1) HDTV Video
2) Light Sensor
For night vision mode
3) Security screws
4) Motion Sensor
5) Illuminated call
buttons
with nameplate
The illumination is
also acting as
Diagnostic LED(s).
6) Night Vision LEDs
5
1) Main Electrical Unit
2) Velcro tape 1
To fix the Multi
Tenant Module
temporary on the
Main Electrical
Unit during assembly
3) Yellow cable for
call button (unused)
4) Red cable for
Module Port 1
Connected to Multi
Tenant Module
Inside
5
6
7
8
1
2
3
4
7) Microphone
8) Loudspeaker
9) RFID Reader
5) Green cable for
Module Port 2
(unused)
6) Screw connection
terminal
7) LAN/PoE jack
8) Nylon cord
To secure the front
panel during assembly
1
2
3
4
6
7
8
9

Specyfikacje produktu

Marka: DoorBird
Kategoria: Niesklasyfikowane
Model: D2101V

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z DoorBird D2101V, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje Niesklasyfikowane DoorBird

DoorBird

DoorBird D31TDH Instrukcja

9 Stycznia 2025
DoorBird

DoorBird D31TDV Instrukcja

9 Stycznia 2025
DoorBird

DoorBird MTM56A Instrukcja

4 Stycznia 2025
DoorBird

DoorBird A1061X Instrukcja

22 Września 2024
DoorBird

DoorBird D1101UV Instrukcja

22 Września 2024
DoorBird

DoorBird D11x Instrukcja

22 Września 2024
DoorBird

DoorBird D21x Instrukcja

21 Września 2024
DoorBird

DoorBird A1101 Instrukcja

21 Września 2024
DoorBird

DoorBird D2101V Instrukcja

10 Września 2024
DoorBird

DoorBird D21DKH Instrukcja

4 Września 2024

Instrukcje Niesklasyfikowane

Najnowsze instrukcje dla Niesklasyfikowane

Rock N Roller

Rock N Roller R14G Instrukcja

29 Stycznia 2025
Rock N Roller

Rock N Roller R6RT Instrukcja

29 Stycznia 2025
QSC

QSC TSC-8 Instrukcja

29 Stycznia 2025
XTRARM

XTRARM XTR-FS5130 Instrukcja

29 Stycznia 2025
Sunding

Sunding SD-581G Instrukcja

29 Stycznia 2025
XTRARM

XTRARM XTR-FS5070 Instrukcja

29 Stycznia 2025
XTRARM

XTRARM XTR-FS2010 Instrukcja

29 Stycznia 2025
Shimbol

Shimbol Memory I PRO Instrukcja

29 Stycznia 2025
OSEE

OSEE TX402 Instrukcja

29 Stycznia 2025
GOgroove

GOgroove Record Cleaning Kit Instrukcja

29 Stycznia 2025