Instrukcja obsługi DoorBird D1101UV

DoorBird Niesklasyfikowane D1101UV

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla DoorBird D1101UV (28 stron) w kategorii Niesklasyfikowane. Ta instrukcja była pomocna dla 4 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/28
Page 2-12
Installation Manual
IP Video Door Station
D1101UV
Seite 13-24
Installationsanleitung
IP Video Türstation
D1101UV
VERSION ., MIN. HW .
D1101UV
2
INSTALLATION MANUAL
Read these instructions carefully before starting to
use any components. Keep the manual so you can
refer to it at a later date if required. If you hand over
the device to other persons for use, please hand over
the operating manual as well.
You can always find the most up-to-date version
of the installation manual on www.doorbird.com/
support
To make things easier we use the term “device” for
the product “IP Video Door Station D11x series” and
“mobile device” for a smartphone or tablet.
Liability
Every care has been taken in the preparation of this
document. Please inform Bird Home Automation
GmbH of any inaccuracies or omissions. Bird Home
Automation GmbH cannot be held responsible for any
technical or typographical errors and reserves the right
to make changes to the product and manuals without
prior notice. Bird Home Automation GmbH makes
no warranty of any kind with regard to the content
of this document, including, but not limited to, the
implied warranties of merchantability and fitness for
a particular purpose. Bird Home Automation GmbH
shall neither be liable nor responsible for incidental
or consequential damages in connection with the
furnishing, performance or use of this material. This
product is only to be used for its intended purpose.
Equipment Modifications
This equipment must be installed and used in
strict accordance with the instructions given in
the user documentation. This equipment contains
no components that require service by the user.
Unauthorized equipment changes or modifications
will invalidate all applicable regulatory certifications
and approvals.
Symbols used
Caution: Indicates a hazardous situation
which, if not avoided, could result in minor
or moderate injury.
Danger: Indicates a hazardous situation
which, if not avoided, will result in death or
serious injury.
Warning: Indicates a hazardous situation
which, if not avoided, could result in death
or serious injury.
Notice: Indicates a situation which, if not
avoided, could result in damage to property.
Note: Indicates useful information which
helps in getting the most out of the product.
N OT I CE
Important: Indicates significant information
which is essential for the product to function
correctly.
Hazard information
∙ Mounting, installation and servicing work on
electrical devices may only be performed by
a qualified eletrician. Failure to observe this
regulation could result in the risk of serious
damage to health or fatal injury due to electric
shocks.
∙ Devices with 110-240 V connection: The device
may only be connected to an easily accessible
power socket outlet. The mains adapter must
be pulled out if a hazard occurs.
∙ For power supply, only use the original
plug-in mains adapter delivered with the
device or a recommended PoE-Switch/
PoE-Injector as specified in this manual.
∙ Because of electrostatic charging, direct
contact with the circuit board can result in
destruction of the device. Direct contact
with the circuit board must therefore be
avoided at any time.
∙ Observe the EN 60065 resp. EN 60950 resp.
EN 62368 standard.
∙ Do not use the device if there are signs of
damage to the housing, control elements or
connecting sockets, for example, or if it
demonstrates a malfunction. If you have any
doubts, please have the device checked by
an authorized expert.
∙ Do not open the device. This voids the
warranty of the device. The device does not
contain any parts that can be maintained
by the user. In the event of an error, please
have the device checked by an authorized
expert.
∙ For safety, approval and licensing reasons
(CE/FCC/IC etc.), unauthorized change and/or
modification of the device is not permitted.
∙ The device is not a toy; do not allow
children to play with it. Do not leave packaging
material lying around. Plastic films/bags,
pieces of polystyrene, etc. can be dangerous
in the hands of a child.
∙ Always lay cables in such a way that they
do not become a risk to people and domestic
animals.
WARNING
ENGLISH
3
∙ Voltage is applied to parts within the
equipment. Do not touch any parts that are
not associated with the installation, wiring,
or connection. Electric shock could result.
∙ On devices which are not marked as
weather-proof: Keep the device away from
water or any other liquid.
∙ Do not install or make any wire terminations
while power supply is plugged in. It can cause
eletric shock or damage to the device.
∙ Before turning on power, make sure wires are
not crossed or shorted. If not, fire or eletric
shock could result.
∙ High voltage may be present internally.
Do not open the device. Electric shock could
result.
∙ The device is not of explosion-proof. Do not
install or use near gases or flammable
materials. Fire or explosion could result.
∙ Do not install two power supplies in parallel
to a single input. Fire or damage to the device
could result. Be sure to connect a single
power supply to the device.
∙ Do not connect any terminal on the device
to an AC power line. Fire or electric shock
could result.
∙ Keep AC cord from being marred or crushed.
If the AC cord is fractured, fire or electric shock
could result.
∙ Do not plug or unplug with wet hands.
Electric shock could result.
∙ Do not put any metal or flammable material
into the device. Fire, electric shock, or device
trouble could result.
∙ Existing wiring such as chime wiring, etc. may
contain high voltage AC electricity. Damage to
the device or electric shock could result.
Wiring and installation must be done by a
qualified eletrician.
∙ When mounting the device on a wall or
ceiling, install the device in a convenient
location, but not where it could be jarred or
bumped. Injury could result.
∙ Do not put any metal or flammable material
into the device. Fire, electric shock, or device
trouble could result.
WARNING ∙ Existing wiring such as chime wiring, etc. may
contain high voltage AC electricity. Damage to
the device or electric shock could result. Wiring
and installation must be done by a qualified
eletrician.
∙ When mounting the device on a wall or ceiling,
install the device in a convenient location, but
not where it could be jarred or bumped. Injury
could result.
∙ On devices with ground terminals, connect to
an earth ground. Otherwise fire or malfunction
could result.
∙ On devices with plastic or real glass, do not put
high pressure on the glass. If fractured, injury
could result.
∙ On devices with LCD, if LCD is punctured, do
not allow contact with the liquid crystal inside.
Injury could result. If necessary, gargle your
mouth and clean your eyes or skin with clear
water for at least 15 minutes and consult your
doctor.
∙ Do not put anything on the device or cover the
device with cloth, silicone, glue, coating,
separate covering etc. Fire or device issues
could result.
∙ Do not install the device in any of the following
locations. Fire, electric shock, or device trouble
could result.
- Places under direct sunlight or places near
heating equipment that varies in temperature.
- Places subject to dust, oil, chemicals,
hydrogen sulfide (hot spring).
- Places subject to moisture and humidity
extremes, such as bathrooms, cellars,
greenhouses, etc.
- Places where the temperature is very low,
such as inside a refrigerated area or in front of
an air conditioner.
- Places subject to steam or smoke (e.g. near
heating or cooking surfaces).
- Where noise generating devices such as
dimmer switches or inverter electrical
appliances are closeby.
- Locations subject to frequent vibration or
impact.
∙ On devices with intercom, be sure to perform
a call test with low audio volume on both
intercom devices. A sudden call etc. may arrive
causing for example damage to your ear.
∙ If the device does not operate properly, unplug
the power supply.

Specyfikacje produktu

Marka: DoorBird
Kategoria: Niesklasyfikowane
Model: D1101UV

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z DoorBird D1101UV, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje Niesklasyfikowane DoorBird

DoorBird

DoorBird A1061X Instrukcja

22 Września 2024
DoorBird

DoorBird D1101UV Instrukcja

22 Września 2024
DoorBird

DoorBird D11x Instrukcja

22 Września 2024
DoorBird

DoorBird D21x Instrukcja

21 Września 2024
DoorBird

DoorBird A1101 Instrukcja

21 Września 2024
DoorBird

DoorBird D2101V Instrukcja

10 Września 2024
DoorBird

DoorBird D202 Instrukcja

4 Lipca 2024

Instrukcje Niesklasyfikowane

Najnowsze instrukcje dla Niesklasyfikowane

Black Diamond

Black Diamond BD1121530000ALL1 Instrukcja

15 Października 2024
Husqvarna

Husqvarna K 970 SmartGuard Instrukcja

15 Października 2024
Stihl

Stihl HT 70 Instrukcja

15 Października 2024
Ernesto

Ernesto H14270 Instrukcja

15 Października 2024
Uniden

Uniden BT MIC KIT Instrukcja

15 Października 2024
Vaude

Vaude Omnis Bike 26 Instrukcja

15 Października 2024
ART

ART ProChannel II Instrukcja

15 Października 2024
Aukey

Aukey DR02J Instrukcja

15 Października 2024
Master Lock

Master Lock 653EURD Instrukcja

15 Października 2024
Roland

Roland FR-18 Diatonic Instrukcja

15 Października 2024