Instrukcja obsługi DoorBird A1101


Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla DoorBird A1101 (52 stron) w kategorii Niesklasyfikowane. Ta instrukcja była pomocna dla 5 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/52
VERSION 1.2, MIN. HW 1.2
A1101
Page 2-16
Installation Manual
IP Video Indoor Station
A1101 Series
Seite 17-32
Installationsanleitung
IP Video Innenstation
A1101 Serie
Page 33-48
Manuel d´installation
Moniteur intérieur IP
Série A1101
2
INSTALLATION MANUAL
Read these instructions carefully before starting to
use any components. Keep the manual so you can
refer to it at a later date if required. If you hand over
the device to other persons for use, please hand over
the operating manual as well.
You can always find the most up-to-date version
of the installation manual on www.doorbird.com/
support
To make things easier we use the term “device” for
the product “DoorBird IP Video Indoor Station A1101”
and “mobile device” for a smartphone or tablet.
Liability
Every care has been taken in the preparation of this
document. Please inform Bird Home Automation
GmbH of any inaccuracies or omissions. Bird Home
Automation GmbH cannot be held responsible for any
technical or typographical errors and reserves the right
to make changes to the product and manuals without
prior notice. Bird Home Automation GmbH makes
no warranty of any kind with regard to the content
of this document, including, but not limited to, the
implied warranties of merchantability and fitness for
a particular purpose. Bird Home Automation GmbH
shall neither be liable nor responsible for incidental
or consequential damages in connection with the
furnishing, performance or use of this material. This
product is only to be used for its intended purpose.
Equipment Modifications
This equipment must be installed and used in strict
accordance with the instructions given in the
user documentation. This equipment contains
no components that require service by the user.
Unauthorized equipment changes or modifications
will invalidate all applicable regulatory certifications
and approvals.
Symbols used
Caution: Indicates a hazardous situation
which, if not avoided, could result in minor
or moderate injury.
Danger: Indicates a hazardous situation
which, if not avoided, will result in death or
serious injury.
Warning: Indicates a hazardous situation
which, if not avoided, could result in death
or serious injury.
Notice: Indicates a situation which, if not
avoided, could result in damage to property.
Note: Indicates useful information which
helps in getting the most out of the product.
N OT I CE
Important: Indicates significant information
which is essential for the product to function
correctly.
Hazard information
Mounting, installation and servicing work on
electrical devices may only be performed by
a qualified eletrician. Failure to observe this
regulation could result in the risk of serious
damage to health or fatal injury due to
electric shocks.
Devices with 110-240 V connection: The
device may only be connected to an easily
accessible power socket outlet.
The mains adapter must be pulled out if a
hazard occurs.
For power supply, only use the original
plug-in mains adapter delivered with the
device or a recommended PoE-Switch
/PoE-Injector as specified in this manual.
Because of electrostatic charging, direct
contact with the circuit board can result in
destruction of the device. Direct contact
with the circuit board must therefore be
avoided at any time.
Observe the EN 60065 resp. EN 60950 resp.
EN 62368 standard.
Do not use the device if there are signs of
damage to the housing, control elements or
connecting sockets, for example, or if it
demonstrates a malfunction. If you have
any doubts, please have the device checked
by an authorized expert.
Do not open the device. This voids the
warranty of the device. The device does not
contain any parts that can be maintained by
the user. In the event of an error, please
have the device checked by an authorized
expert.
For safety, approval and licensing reasons
(CE/FCC/IC etc.), unauthorized change and/
or modification of the device is not
permitted.
The device is not a toy; do not allow children
to play with it. Do not leave packaging
material lying around. Plastic films/bags,
pieces of polystyrene, etc. can be dangerous
in the hands of a child.
Always lay cables in such a way that they do
not become a risk to people and domestic
animals.
Voltage is applied to parts within the
equipment. Do not touch any parts that are
WARNING
ENGLISH
3
not associated with the installation, wiring,
or connection. Electric shock could result.
On devices which are not marked as
weather-proof: Keep the device away from
water or any other liquid.
Do not install or make any wire terminations
while power supply is plugged in. It can
cause eletric shock or damage to the device.
Before turning on power, make sure wires are
not crossed or shorted. If not, fire or eletric
shock could result.
∙ High voltage may be present internally.
Do not open the device. Electric shock
could result.
The device is not of explosion-proof. Do not
install or use near gases or flammable
materials. Fire or explosion could result.
Do not install two power supplies in parallel
to a single input. Fire or damage to the
device could result. Be sure to connect a
single power supply to the device.
Do not connect any terminal on the device
to an AC power line. Fire or electric shock
could result.
Keep AC cord from being marred or crushed.
If the AC cord is fractured, fire or electric
shock could result.
Do not plug or unplug with wet hands.
Electric shock could result.
Do not put any metal or flammable material
into the device. Fire, electric shock, or device
trouble could result.
Existing wiring such as chime wiring, etc.
may contain high voltage AC electricity.
Damage to the device or electric shock
could result. Wiring and installation must be
done by a qualified eletrician.
When mounting the device on a wall or
ceiling, install the device in a convenient
location, but not where it could be jarred or
bumped. Injury could result.
On devices with ground terminals, connect
to an earth ground. Otherwise fire or
malfunction could result.
On devices with plastic or real glass, do not
put high pressure on the glass. If fractured,
injury could result.
On devices with LCD, if LCD is punctured, do
not allow contact with the liquid crystal
inside. Injury could result. If necessary, gargle
your mouth and clean your eyes or skin with
WARNING
clear water for at least 15 minutes and
consult your doctor.
Do not put anything on the device or cover
the device with cloth, silicone, glue, coating,
separate covering etc. Fire or device issues
could result.
Do not install the device in any of the
following locations. Fire, electric shock, or
device trouble could result.
- Places under direct sunlight or places near
heating equipment that varies in
temperature.
- Places subject to dust, oil, chemicals,
hydrogen sulfide (hot spring).
- Places subject to moisture and humidity
extremes, such as bathrooms, cellars,
greenhouses, etc.
- Places where the temperature is very low,
such as inside a refrigerated area or in front
of an air conditioner.
- Places subject to steam or smoke (e.g. near
heating or cooking surfaces).
- Where noise generating devices such as
dimmer switches or inverter electrical
appliances are closeby.
- Locations subject to frequent vibration or
impact.
On devices with intercom, be sure to perform
a call test with low audio volume on both
intercom devices. A sudden call etc. may
arrive causing for example damage to your
ear.
If the device does not operate properly,
unplug the power supply.
All devices which are not marked as
weather-proof are designed for indoor use
only. Do not use outdoor.
On devices which are marked weather-proof:
Do not spray with high-pressure water. Device
issues could result.
We do not assume any liability for damage to
property or personal injury caused by
improper use or the failure to observe the
hazard information. In such cases, any claim
under warranty ceases. For consequential
damages, we assume no liability!
Safety instructions
The device shall be used in compliance with
local laws and regulations.
Store the device in a dry and ventilated
environment.
Avoid exposing the device to shocks or heavy
pressure.
N OT I CE


Specyfikacje produktu

Marka: DoorBird
Kategoria: Niesklasyfikowane
Model: A1101

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z DoorBird A1101, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje Niesklasyfikowane DoorBird

DoorBird

DoorBird A1061X Instrukcja

22 Września 2024
DoorBird

DoorBird D1101UV Instrukcja

22 Września 2024
DoorBird

DoorBird D11x Instrukcja

22 Września 2024
DoorBird

DoorBird D21x Instrukcja

21 Września 2024
DoorBird

DoorBird A1101 Instrukcja

21 Września 2024
DoorBird

DoorBird D2101V Instrukcja

10 Września 2024

Instrukcje Niesklasyfikowane

Najnowsze instrukcje dla Niesklasyfikowane

Stihl

Stihl HT 70 Instrukcja

15 Października 2024
Ernesto

Ernesto H14270 Instrukcja

15 Października 2024
Uniden

Uniden BT MIC KIT Instrukcja

15 Października 2024
Vaude

Vaude Omnis Bike 26 Instrukcja

15 Października 2024
ART

ART ProChannel II Instrukcja

15 Października 2024
Aukey

Aukey DR02J Instrukcja

15 Października 2024
Master Lock

Master Lock 653EURD Instrukcja

15 Października 2024
Roland

Roland FR-18 Diatonic Instrukcja

15 Października 2024