Instrukcja obsługi Dimension BST 768
Dimension
drukarka 3D
BST 768
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Dimension BST 768 (68 stron) w kategorii drukarka 3D. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek
Strona 1/68
BST 768 / SST 768
User Guide
2
Dimension BST 768 / SST 768 User Guide
Notice
The information in this document is subject to change without notice.
STRATASYS, INC. MAKES NO WARRANTY OF ANY KIND WITH REGARD TO THIS MATE-
RIAL, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANT-
ABILITY AND FITNESS FOR A PARTICULAR PURPOSE. Stratasys, Inc. shall not be liable
for errors contained herein or for incidental or consequential damages in connection with
the furnishing, performance, or use of this material.
This equipment has been tested and found to comply with the limits for a Class A digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide rea-
sonable protection against harmful interference when the equipment is operated in a
commercial environment. This equipment generates, uses and can radiate radio fre-
quency energy and, if not installed and used in accordance with the instruction manual,
may cause harmful interference to radio communications. Operation of this equipment in
a residential area is likely to cause harmful interference in which case the user will be
required to correct the interference at his own expense.
Changes or modifications to the Dimension system not expressly approved by Stratasys,
the party responsible for compliance, could void the user’s authority for use.
This document is protected by copyright. All rights reserved. Its use, disclosure, and
possession are restricted by an agreement with Stratasys per software copyright. No part
of this document may be photocopied, reproduced or translated into another language
without the prior written consent of Stratasys, Inc. Printed in the USA.
Stratasys, Dimension, and Catalyst are registered trademarks of Stratasys, Inc.
Krytox, Windows 2000, and Windows XP are registered trademarks of their respective
companies.
© Copyright 2006 Stratasys, Incorporated.
April 2006
The Dimension system conforms with the following standards, in
accordance with the EU Machinery, Low Voltage and Electromagnetic
Compatibility Directives: EU 89/392/EEC, EU 98/37/EEC, EU 73/23/EEC
amended by 93/68/EEC, EU 89/336/EEC
3
Dimension BST 768 / SST 768 User Guide
Introduction
Dimension is designed with ultimate simplicity in mind. The system
enables you to build parts quickly, even if you’ve never used a 3D
printer before. Its display panel prompts you to press a few keys to
get you modeling quickly.
The system models with ABS plastic, so modeled parts are strong
and durable. ABS also ensures you’ll be able to drill, tap, sand, and
paint your creations. With the speed and convenience of
Breakaway Support Technology (BST) or Soluble Support
Technology (SST), your completed parts are quickly available for
review and test.
Dimension is an innovative combination of proprietary hardware,
software, and material technology.
Congratulations…
you’ve made a smart choice!
Specyfikacje produktu
| Marka: | Dimension |
| Kategoria: | drukarka 3D |
| Model: | BST 768 |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z Dimension BST 768, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje drukarka 3D Dimension
2 Września 2024
Instrukcje drukarka 3D
- drukarka 3D LulzBot
- drukarka 3D Kodak
- drukarka 3D MakerBot
- drukarka 3D Flashforge
- drukarka 3D Renkforce
- drukarka 3D Velleman
- drukarka 3D Anker
- drukarka 3D Creality
- drukarka 3D Exibel
- drukarka 3D BQ
- drukarka 3D Monoprice
- drukarka 3D XYZprinting
- drukarka 3D Craftbot
- drukarka 3D Leap Frog
- drukarka 3D Anycubic
- drukarka 3D German RepRap
- drukarka 3D Creality3D
- drukarka 3D Wanhao
- drukarka 3D Artillery
- drukarka 3D GooVer
- drukarka 3D Easy Threed
- drukarka 3D Zortrax
- drukarka 3D SINDOH
- drukarka 3D PP3DP
- drukarka 3D Wasp
- drukarka 3D 3D Systems
- drukarka 3D Raise3D
Najnowsze instrukcje dla drukarka 3D
7 Października 2024
7 Października 2024
4 Października 2024
4 Października 2024
4 Października 2024
4 Października 2024
4 Października 2024
4 Października 2024
4 Października 2024
4 Października 2024