Instrukcja obsługi Delta Dore Tybox 137+

Delta Dore termostat Tybox 137+

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Delta Dore Tybox 137+ (20 stron) w kategorii termostat. Ta instrukcja była pomocna dla 32 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/20
1
www.deltadore.com
Tybox 137+
Installation and User
Guide
Contents
Installation
The Tybox consists of an X3D
radio transmier and receiver
that come pre-associated.
1. Installing the transmier ............................................................................................ 3
1.1 Location 3 ...................................................................................................................................
1.2 Mounting 3 ..................................................................................................................................
2. Installing the receiver .................................................................................................. 4
2.1 Location 4 ...................................................................................................................................
2.2 Mounting/Connection 4 .......................................................................................................
3. Time and date seing 4 .................................................................................................
4. Conguring your device (Menu 1) 5 ..............................................................................
Menu 1-02 Programme duration 5 ..............................................................................................
Menu 1-03 Pre-heat activation/deactivation 5 ....................................................................
Menu 1-04 Selecting the way the receiver relay opens 5 .................................................
Menu 1-08 Controlling the Comfort temperature 5 ............................................................
Menu 1-09 Anti-seize activation/deactivation 6 .................................................................
Menu 1-10 Selecting the programming type when connected to Tydom 6 ...............
5. Conguring your device (Menu 2) 7 .............................................................................
Menu 2-01 Locking or unlocking the seings 7 .....................................................................
Menu 2-02 Correcting the measured temperature 7 .........................................................
Menu 2-04 Temperature displayed in AUTO mode (setpoint or room).....................7
Menu 2-05 12h/24h time format 7 ..............................................................................................
Menu 2-06 Automatic summer/winter changeover ........................................................8
Menu 2-07 Days until boiler/heat pump service reminder ...........................................8
Menu 2-08 Control time base 8 ..................................................................................................
Menu 2-11 Hysteresis seing (if 2-08 = tor) 8 ...........................................................................
Menu 2-17 Reseing the boiler/heat pump operating hours meter 9 ..........................
6. Associating to the Tydom app ................................................................................... 9
7. Association with a door/window magnetic contact 9 ............................................
8. Association with a phone transmier ...................................................................... 9
3
PROG x 1
PROG x 7
~1,50 m
> 20 cm
1. Installing the transmitter
1.1 Location
The thermostat can be wall-mounted or placed
on a piece of furniture in a room where the
temperature is to be regulated from, at a
recommended height of 1.5m and away from any
heat sources (replace, direct sunlight, etc.) or
draughts (window, door, etc.).
IMPORTANT: Do not install the thermostat on
a wall in contact with the outside or with an
unheated room (e.g. garage, etc.).
1.2 Mounting
Separate the box from its base.
Insert the baeries
WARNING: make sure you insert the baeries
facing the right way and that they are the right
type (no lithium baeries).
Toggle the switch to choose the programme
type: weekly (A) or daily (B).
Secure the transmier with suitable screws
to the wall-mount or use the supplied stand to
place it on a at (non-metallic) surface.
❺❻ Close and lock the box.
INSTALLATION
Wall mounting Fied on base
4
1
31
1
12
0
23
0
59
2021...
1
2
3
4
5
8
9
10
11
12
6
7
EXIT
Turn the dial to .
-> Set the day, month, year with + or -.
Conrm with OK.
-> Set the hour then the minutes with + or -.
Conrm with OK.
To exit the mode, turn the dial.
3. Time and date setting
2. Installing the receiver
2.1 Location
The receiver must be installed a minimum of 20
cm away from any metal surface (e.g. the boiler),
and about 1.50 m from the ground to ensure an
optimum radio link with the transmier.
2.2 Mounting/Connection
First of all, switch o the power to your
installation.
The receiver can be xed using suitable
screws or by (supplied) adhesives.
Comply with the cable colours when wiring.
Blue: Neutral
Brown: Live
Black and grey: Controls for the thermostat
input or the generator circulator (boiler or heat
pump).
Once the receiver is connected, turn on the
power to your installation.
Th
NL
NL
~1,50 m
> 20 cm
OFF
ON
OR
If the screen displays “OFF”, your product is connected to the Tydom app (menu 1-10 = 1).
The date and time details are no longer show on the thermostat screen.
WARNING: the heating is set to Frost Protection when in this position.
REMINDER:
The Tybox consists of an X3D radio
transmier and receiver that come pre-
associated.

Specyfikacje produktu

Marka: Delta Dore
Kategoria: termostat
Model: Tybox 137+

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Delta Dore Tybox 137+, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą