Instrukcja obsługi DBX 1066

DBX edytor 1066

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla DBX 1066 (72 stron) w kategorii edytor. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/72
®
OPERATION MANUAL
M ’ODE D EMPLOI
BEDIENUNGSANLEITUNG
MODO DE EMPLEO
MODEL 1066
A Harman International Company
WARNING
FOR YOUR PROTECTION, PLEASE READ THE FOLLOWING:
WATER AND MOISTURE: Appliance should not be used near water (e.g. near a
bathtub, washbowl, kitchen sink, laundry tub, in a wet basement, or near a swimming
pool, etc). Care should be taken so that objects do not fall and liquids are not spilled
into the enclosure through openings.
POWER SOURCES: The appliance should be connected to a power supply only of
the type described in the operating instructions or as marked on the appliance.
GROUNDING OR POLARIZATION: Precautions should be taken so that the ground-
ing or polarization means of an appliance is not defeated.
POWER CORD PROTECTION: Power supply cords should be routed so that they are
not likely to be walked on or pinched by items placed upon or against them, paying
particular attention to cords at plugs, convenience receptacles, and the point where
they exit from the appliance.
SERVICING: To reduce the risk of fire or electric shock, the user should not attempt to
service the appliance beyond that described in the operating instructions. All other
servicing should be referred to qualified service personnel.
FOR UNITS EQUIPPED WITH EXTERNALLY ACCESSIBLE FUSE RECEPTACLE:
Replace fuse with same type and rating only.
SAFETY INSTRUCTIONS
NOTICE FOR CUSTOMERS IF YOUR UNIT IS EQUIPPED WITH A POWER
CORD.
WARNING: THIS APPLIANCE MUST BE EARTHED.
The cores in the mains lead are coloured in accordance with the following code:
GREEN and YELLOW - Earth BLUE - Neutral BROWN - Live
As colours of the cores in the mains lead of this appliance may not correspond
with the coloured markings identifying the terminals in your plug, proceed as fol-
lows:
The core which is coloured green and yellow must be connected to the
terminal in the plug marked with the letter E, or with the earth symbol, or
coloured green, or green and yellow.
The core which is coloured blue must be connected to the terminal
marked N or coloured black.
The core which is coloured brown must be connected to the terminal
marked L or coloured red.
This equipment may require the use of a different line cord, attachment plug, or
both, depending on the available power source at installation. If the attachment
plug needs to be changed, refer servicing to qualified service personnel who
should refer to the table below. The green/yellow wire shall be connected
directly to the unit's chassis.
WARNING: If the ground is defeated, certain fault conditions in the unit or in the
system to which it is connected can result in full line voltage between chassis
and earth ground. Severe injury or death can then result if the chassis and
earth ground are touched simultaneously.
LIVE
E
NEUTRAL
EARTH GND
CONDUCTOR
L
N
BROWN
BLUE
GREEN/YEL
BLACK
Normal Alt
WIRE COLOR
WHITE
GREEN
U.K. PLUGMAINS WARNING
A moulded mains plug that has been cut off from the cord is unsafe. Discard the
mains plug at a suitable disposal facility. NEVER UNDER ANY CIRCUM-
STANCES SHOULD YOU INSERT A DAMAGED OR CUT MAINS PLUG INTO
A 13 AMP POWER SOCKET. Do not use the mains plug without the fuse cover
in place. Replacement fuse covers can be obtained from your local retailer.
Replacement fuses are 13 amps and MUST be ASTA approved to BS1362.
The symbols shown above are internationally accepted symbols that warn of
potential hazards with electrical products. The lightning flash with arrowpoint in
an equilateral triangle means that there are dangerous voltages present within
the unit. The exclamation point in an equilateral triangle indicates that it is nec-
essary for the user to refer to the owner’s manual.
These symbols warn that there are no user serviceable parts inside the unit.
Do not open the unit. Do not attempt to service the unit yourself. Refer all ser-
vicing to qualified personnel. Opening the chassis for any reason will void the
manufacturer’s warranty. Do not get the unit wet. If liquid is spilled on the unit,
shut it off immediately and take it to a dealer for service. Disconnect the unit
during storms to prevent damage.
C A U T I O N
A T T E N T I O N : RI S Q U E D E C H O C E L E C T R I Q U E - N E P A S O U V R I R
W A R N I N G : T O R E D U C E T H E R I S K O F F I R E O R E L E C T R I C
S H O C K D O N O T E X P O S E T H I S E Q U I P M E N T T O R A I N O R M O I S T U R E
R I S K O F E L E C T R I C S H O C K
D O N O T O P E N
ELECTROMAGNETIC COMPATIBILITY
This unit conforms to the Product Specifications noted on the Declaration of
Conformity. Operation is subject to the following two conditions:
this device may not cause harmful interference, and
this device must accept any interference received, including interference
that may cause undesired operation. Operation of this unit within signifi-
cant electromagnetic fields should be avoided.
DECLARATION OF CONFORMITY
Manufacturer’s Name: dbx Professional Products
Manufacturer’s Address: 8760 S. Sandy Parkway
Sandy, Utah 84070, USA
declares that the product:
dbx 1066
conforms to the following Product Specifications:
Safety: EN 60065 (1993)
IEC65 (1985) with Amendments 1, 2, 3
EMC: EN 55013 (1990)
EN 55020 (1991)
Supplementary Information:
The product herewith complies with the requirements of the
Low Voltage Directive 73/23/EEC and the EMC Directive
90/336/EEC as amended by Directive 93/68/EEC.
dbx Professional Products
Vice-President of Engineering
8760 S. Sandy Parkway
Sandy, Utah 84070, USA
February 10, 1997
European Contact: Your Local dbx Sales and Service Office or
Harman Music Group
8760 South Sandy Parkway Sandy, Utah 84070 USA
Ph: (801) 566-8800 Fax:(801) 568-7583
E . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1NGLISH
FRANÇAIS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
DEUTSCH . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
ESPAÑOL. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
I . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2NTRODUCTION
INSPECTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
WARRANTY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
CONNECTING THE 1066 TO YOUR SYSTEM . . . . . . . . . . . . . . . . . . . . . 3
OPERATING CONTROLS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
APPLICATIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
INSTALLATION ONSIDERATIONSC . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
SPECIFICATIONS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63
NOTES. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66
E CNGLISH ONTENTS
M CANUAL ONTENTS
®
1
Manual Contents


Specyfikacje produktu

Marka: DBX
Kategoria: edytor
Model: 1066

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z DBX 1066, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje edytor DBX

DBX

DBX 160A Instrukcja

30 Września 2024
DBX

DBX 1046 Instrukcja

20 Września 2024
DBX

DBX 166xs Instrukcja

12 Września 2024
DBX

DBX DDP Instrukcja

12 Września 2024
DBX

DBX 1066 Instrukcja

9 Września 2024
DBX

DBX MC6 Instrukcja

9 Września 2024
DBX

DBX DriveRack PA2 Instrukcja

26 Sierpnia 2024

Instrukcje edytor

Najnowsze instrukcje dla edytor

Helix

Helix DSP ULTRA Instrukcja

8 Października 2024
Helix

Helix DSP.3S Instrukcja

8 Października 2024
Helix

Helix DSP ULTRA S Instrukcja

8 Października 2024
MyMix

MyMix RX-2 Instrukcja

8 Października 2024
SPL

SPL M/S Master Instrukcja

8 Października 2024
Bose

Bose ControlSpace CC-16 Instrukcja

7 Października 2024
MuxLab

MuxLab 500550 Instrukcja

7 Października 2024
Lectrosonics

Lectrosonics DNT16i Instrukcja

7 Października 2024