Instrukcja obsługi D-Link DBA-X1230P

D-Link Punkt dostępu DBA-X1230P

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla D-Link DBA-X1230P (9 stron) w kategorii Punkt dostępu. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/9

Documentation is also available on

the D-Link website

This document will guide you through the basic

installation process for your new D-Link

Nuclias Cloud-Managed AX1800 Access Point

DBA-X1230P

Quick Installation Guide

Access Point

ENGLISH

Hardware Overview

LED Indicators

Figure 1: Front Panel LED

# LED Status Description

1Power/

Cloud

Solid

orange

The DBA-X1230P is booting up.

Blinking

orange

The DBA-X1230P is resetting

to its default settings or is

upgrading its rmware.

Blinking

green

The DBA-X1230P is connecting

to the D-Link Nuclias cloud.

Solid

green

The DBA-X1230P is in cloud mode.

Solid

red

The DBA-X1230P is not working

properly in cloud mode.

Table 1: LED Description

Interface Connectors

23 4

Figure 2: Rear Connectors

# Connector Description

1 Lock slot

Slot to use with the lock plate for inserting

a physical lock to secure the DBA-X1230P

to the mounting plate (optional).

2 Console port Directly manage the AP with no wireless

connection through the console port.

3PoE LAN

port

Gigabit RJ-45 port for data and

Power over Ethernet (PoE) power.

4 Power input Input for the power adapter (optional).

Table 2: Interface Description

Before You Begin

This installation guide provides instructions for

installing the DBA-X1230P on your network.

Additional documentation is also available on the

D-Link support website.

• D-Link Nuclias User Manual: For additional

information and instructions on how to congure

the device using the D-Link Nuclias Cloud.

• DBA-X1230P User Manual: For additional

information and instructions on how to congure

the device using the web user interface.

Package Contents

This DBA-X1230P package should include the

following items:

• 1 x DBA-X1230P

• 1 x Power adapter (optional)*

• 1 x Mounting kit

If any of the above items are damaged or missing,

please contact your local D-Link reseller.

*If the power adapter is not included, it can be

purchased separately. Please contact your local

D-Link reseller.

Setup Preparation

Please ensure that the following items are readily

available before continuing the installation process:

• An active D-Link Nuclias account.

• An active Internet connection to connect to the

D-Link Nuclias cloud.

• A valid device license. Contact your D-Link Nuclias

service provider for more information.

System Requirements

• A PC or laptop with a working Ethernet adapter

or wireless interface.

• Mozilla Firefox 52.0 or higher, Internet Explorer

11 or higher, Safari 10.1 or higher, Google

Chrome 59 or higher.

• OS X 10.8.5, Windows 7, Linux (Ubuntu 12).

ENGLISH

Powering the Access Point

The DBA-X1230P can be powered using one of the

following two methods:

Using Power over Ethernet (PoE)

Use a standard Ethernet cable to connect the LAN

port on the DBA-X1230P to a PoE power source

device such as a PoE switch or PoE injector.

(Optional) Using the Power Adapter

Connect the power connector of the adapter to

the power input on the DBA-X1230P and plug the

adapter into a nearby power outlet.

Conguring the Access Point

Using D-Link Nuclias

Note: To use D-Link Nuclias, the DBA-X1230P must

be connected to the Internet.

The DBA-X1230P is designed to be managed through

the D-Link Nuclias cloud. Refer to the D-Link Nuclias

User Manual for detailed conguration instructions.

Switch or RouterSwitch or Router Management

DBA-X1230P

D-Link Nuclias

Figure 3: Connecting through D-Link Nuclias

1. On an Internet-connected PC, open a web

browser and go to www.nuclias.com.

2. Enter your D-Link Nuclias user name and

password.

If a device’s login credentials are modied using

Nuclias Cloud, the local username and password

will also reect the changes made. To learn more

about conguring your password, please refer to

the Nuclias Cloud manual.

Manual Conguration

Note: D-Link recommends manually conguring the

device before mounting it.

If you are unable to connect to the D-Link Nuclias

cloud, you may need to manually configure the

DBA-X1230P using its web user interface (UI).

Refer to the DBA-X1230P User Manual for detailed

conguration instructions.

Use one of the following methods to access the web

user interface:

Connecting through Ethernet

Note: The management PC must be in the same

subnet as the DBA-X1230P.

1. Use an Ethernet cable to connect the DBA-X1230P

to the management PC or to the switch or router

the management PC is connected to.

2. Open a web browser and type in the default

host name of the DBA-X1230P and press Enter.

The default host name is DBA-X1230P-XXXX

where XXXX represents the last 4 characters

of the MAC address listed on the device label

located on the bottom of the device.

3. When prompted, enter the default login

credentials:

User name: admin

Password: admin

Connecting Wirelessly

1. Connect the management PC to the default SSID

of the DBA-X1230P. The SSID will be in the format

DBA-X1230P-XXX where XXXX represents the

last 4 characters of the MAC address listed on the

device label located on the bottom of the device.

2. Open a web browser and type in the default

host name of the DBA-X1230P and press Enter.

The default host name is DBA-X1230P-XXXX

where XXXX represents the last 4 characters

of the MAC address listed on the device label

located on the bottom of the device.

3. When prompted, enter the default login

credentials:

User name: admin

Password: admin

Attaching the Rubber Pads

The included rubber pads can be placed on the

bottom of the device to prevent the device from

damaging the surface it is placed on.

1. Remove the rubber pads from the adhesive strip.

2. Stick one pad on each foot on the bottom panel

of the access point.

Specyfikacje produktu

Marka:	D-Link
Kategoria:	Punkt dostępu
Model:	DBA-X1230P

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z D-Link DBA-X1230P, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą

Twoje imię*

Twój email*

Napisz tutaj swoje pytanie

Instrukcje Punkt dostępu D-Link

D-Link DWL-1000AP+ Instrukcja

9 Października 2024

D-Link DWL-700AP Instrukcja

9 Października 2024

D-Link DBA-X1230P Instrukcja

13 Września 2024

D-Link DAP-2682 Instrukcja

10 Września 2024

D-Link Wireless N Quadband Unified Access Point Instrukcja

2 Września 2024

D-Link DAP-1150 Instrukcja

30 Sierpnia 2024

D-Link COVR-2200 Instrukcja

24 Sierpnia 2024

D-Link DAP-3410 Instrukcja

18 Sierpnia 2024

D-Link DWL-7620AP Instrukcja

16 Sierpnia 2024

D-Link Nuclias DBA-3621P Instrukcja

9 Sierpnia 2024

Instrukcje Punkt dostępu

Najnowsze instrukcje dla Punkt dostępu

Cisco MR12 Instrukcja

14 Października 2024

Draytek VigorAP 920R Instrukcja

13 Października 2024

Netgear WNDAP360 Instrukcja

12 Października 2024

TP-Link Festa F65-Wall Instrukcja

9 Października 2024

Cambium Networks cnPilot e505 Instrukcja

9 Października 2024

Cambium Networks cnPilot e425H Instrukcja

9 Października 2024

Cambium Networks cnPilot e600 Instrukcja

9 Października 2024

Cambium Networks cnPilot e510 Instrukcja

9 Października 2024

Cambium Networks cnPilot e502S Instrukcja

9 Października 2024

FlyingVoice FTA1101 Instrukcja

9 Października 2024