Instrukcja obsługi CyberPower OLS3000E

CyberPower zasilacz UPS OLS3000E

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla CyberPower OLS3000E (15 stron) w kategorii zasilacz UPS. Ta instrukcja była pomocna dla 15 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/15

User’s Manual

OLS1000E/EXL

OLS1500E/EXL

OLS 00E/EXL 20

OLS 00E/EXL 30

CyberPower Systems Inc.

www.cpsww.com

K01-C0000 -36 00

IMPORTANT SAFETY INSTRUCTIONS

This manual contains important instructions. Please read and follow all instructions carefully during installation and operation of the

unit. Read this manual thoroughly before attempting to unpack, install, or operate the UPS.

CAUTION! The UPS must be connected to a grounded AC

power outlet with fuse or circuit breaker protection. DO NOT

plug the UPS into an outlet that is not grounded. If you need to

power-drain this equipment, turn oﬀ and unplug the unit.

CAUTION! The battery can power hazardous components

inside the unit, even when the AC input power is disconnected.

CAUTION! The UPS should be placed near the connected

equipment and easily accessible.

CAUTION! To prevent the risk of ﬁre or electric shock, install

in a temperature and humidity controlled indoor area, free of

conductive contaminants. (Please see speciﬁcations for

acceptable temperature and humidity range).

CAUTION! (No User Serviceable Parts): Risk of electric

shock, do not remove cover. No user serviceable parts inside.

Refer servicing to qualiﬁed service personnel.

CAUTION! (Non-Isolated Battery Supply): Risk of electric

shock, battery circuit is not isolated from AC power source;

hazardous voltage may exist between battery terminals and

ground. Test before touching.

CAUTION! To reduce the risk of ﬁre, connect the UPS to a

branch circuit with 10 amperes (OLS1000 / OLS1500) / 16

amperes (OLS2000/ OLS3000) maximum over-current

protection in accordance to CE requirement.

CAUTION! The AC outlet where the UPS is connected should

be close to the unit and easily accessible.

CAUTION! Please use only VDE-tested, CE-marked mains

cable, (e.g. the mains cable of your equipment), to connect the

UPS to the AC outlet.

CAUTION! Please use only VDE-tested, CE-marked power

cables to connect any equipment to the UPS.

CAUTION! When installing the equipment, ensure that the

sum of the leakage current of the UPS and the connected

equipment does not exceed 3.5mA.

CAUTION! The OLS1000 / OLS 00 / OLS2000 / OLS3000 / 15

Battery module models are only qualiﬁed maintenance

personnel may carry out installations.

CAUTION! Do not unplug the unit from AC Power during

operation, as this will invalidate the protective ground

insulation.

CAUTION! To avoid electric shock, turn oﬀ and unplug the

unit before installing the input/output power cord with a ground

wire. Connect the ground wire prior to connecting the line

wires!

CAUTION! Do not use an improper size power cord as it may

cause damage to your equipment and cause ﬁre hazards.

CAUTION! Wiring must be done by qualiﬁed personnel.

CAUTION! DO NOT USE FOR MEDICAL OR LIFE

SUPPORT EQUIPMENT! Under no circumstances this unit

should be used for medical applications involving life support

equipment and/or patient care.

CAUTION! DO NOT USE WITH OR NEAR AQUARIUMS!

To reduce the risk of ﬁre, do not use with or near aquariums.

Condensation from the aquarium can come in contact with

metal electrical contacts and cause the machine to short out.

CAUTION! Do not dispose of batteries in ﬁre as the battery

may explode.

CAUTION! Do not open or mutilate the battery, released

electrolyte is harmful to the skin and eyes.

CAUTION! A battery can present a risk of electric shock and

high short circuit current. The following precaution should be

observed when working on batteries

1. Remove watches, rings or other metal objects.

2. Use tools with insulated handles.

CAUTION! The unit has a dangerous amount of voltage.

When the UPS indicators is on, the units may continue to

supply power thus the unit’s outlets may have a dangerous

amount of voltage even when it’s not plugged in to the wall

outlet.

CAUTION! Make sure everything is turned oﬀ and

disconnected completely before conducting any maintenance,

repairs or shipment.

CAUTION! Connect the Protection Earth (PE) safety

conductor before any other cables are connected.

WARNING! (Fuses): To reduce the risk of ﬁre, replace only

with the same type and rating of fuse.

DO NOT INSTALL THE UPS WHERE IT WOULD BE

EXPOSED TO DIRECT SUNLIGHT OR NEAR A STRONG

HEAT SOURCE!

DO NOT BLOCK OFF VENTILATION OPENINGS AROUND

THE HOUSING!

DO NOT CONNECT DOMESTIC APPLIANCES SUCH AS

HAIR DRYERS TO UPS OUTPUT SOCKETS!

SERVICING OF BATTERIES SHOULD BE PERFORMED OR

SUPERVISED BY PERSONNEL KNOWLEDGE OF

BATTERIES AND THE REQUIRED PRECAUTIONS. KEEP

UNAUTHORIZED PERSONNEL AWAY FROM BATTERIES!

UNPACKING

UPS

User’s manual

Phone line

USB communication cable

Input power cord

Output power cords x2pcs

PowerPanel® Business Edition software CD

Specyfikacje produktu

Marka:	CyberPower
Kategoria:	zasilacz UPS
Model:	OLS3000E
Kolor produktu:	Czarny
Typ wyświetlacza:	LCD
Wysokość produktu:	337 mm
Szerokość produktu:	196 mm
Głębokość produktu:	416 mm
Waga produktu:	28200 g
Czas ładowania:	5 h
Napięcie operacyjne wejścia (maksymalne):	280 V
Pojemność baterii:	8.5 Ah
Technologia baterii:	Ołowiany (VRLA)
Wydajność:	95 %
Ilość portów Ethernet LAN (RJ-45):	1
Zakres temperatur (eksploatacja):	0 - 40 °C
Zakres wilgotności względnej:	0 - 90 %
Układ:	Mini Tower
Liczba portów USB 2.0:	1
Częstotliwość danych wejściowych:	40/70 Hz
Diody LED:	Wymiana baterii
Rodzaj chłodzenia:	Aktywne
Liczba baterii:	3
Dołączone oprogramowanie:	PowerPanel BE
Napięcie baterii:	12 V
Moc rzeczywista:	2400 W
Wbudowany wentylator:	Tak
Szeregowe porty komunikacyjne:	1
Maksymalna możliwa do konfiguracji moc:	3 kVA
Napięcie operacyjne wejścia (minimalne):	120 V
Napięcie operacyjne wyjścia (maksymalne):	208 V
Napięcie operacyjne wyjścia (minimalne):	240 V
Funkcje ochrony przed przepięciami:	Fax, Modem, Network, Telephone
Słyszalny alarm:	Tak
Ilość gniazd sieciowych:	5 x gniazdo sieciowe
Typy wyjść AC:	C13 coupler, C19 coupler
Porty modemu rj-11:	1
Typowy czas podtrzymania przy połowie obciążenia:	14 min
Typowy czas podtrzymania przy pełnym obciążeniu:	5 min
Zimny start:	Tak
Funkcje ochrony zasilania:	Krótkie spięcie
Wtyczka:	C20 panel
Automatyczny test baterii:	Tak
Ochrona przed nagłym wzrostem napięcia:	Tak
Awaryjne wyłączenie zasilania:	Tak
Auto-restart:	Tak
Przebieg falowy:	Sinus
Filtr EMI/RFI:	Tak
Tryby alarmu dźwiękowego:	Wymiana baterii