Instrukcja obsługi CyberPower CPS425SL

CyberPower zasilacz UPS CPS425SL

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla CyberPower CPS425SL (16 stron) w kategorii zasilacz UPS. Ta instrukcja była pomocna dla 11 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/16

User Manual for:

CPS425SL/CPS525SL

with USB Interface and

PowerPanel™ Software

ADDITIONAL INSTALLATION TIPS CAN BE FOUND AT:

www.cyberpowersystems.com/FAQs.htm

TABLE OF CONTENTS

Thank you for purchasing a CyberPower Systems Product. To enjoy all the fea-

tures and benefits of this Uninterruptible Power System (UPS), please read and

follow all installation and operation instructions completely. This UPS is designed

to provide guaranteed power protection for connected electronic equipment. The

accompanying PowerPanel™ software saves data, closes open applications and

automatically shuts down your computer system in an intelligent and orderly

manner.

Safety Instructions....... ... .. ... ... ... ...1

Description……………………………..1

Determining Power Requirements…..2

Hardware Installation Guide………….2

Software Installation Guide…………..3

CPS425SL/CPS525SL

Guaranteed Uninterruptible Power System

IMPORTANT SAFETY INSTRUCTIONS (SAVE THESE INSTRUCTIONS)

This manual contains important safety instructions.

Please read and follow all instructions carefully during

installation and operation of unit. Read this manual

thoroughly before attempting to unpack, install, or oper-

ate.

CAUTION! To prevent the risk of fire or electric shock,

install in a temperature and humidity controlled indoor

area, free of conductive contaminants. (Please see

specifications for acceptable temperature and humidity

range).

CAUTION! To reduce the risk of electric shock, do not

remove the cover except to service the battery. No user

serviceable parts inside except for battery.

CAUTION! Hazardous live parts inside can be energized

by the battery even when the AC input power is discon-

nected.

CAUTION! UPS must be connected to an AC power

outlet with fuse or circuit breaker protection. Do not plug

into an outlet that is not grounded. If you need to de-

energize this equipment, turn off and unplug the unit.

CAUTION! To avoid electrical shock, turn off the unit and

unplug it from the AC power source before servicing the

battery or installing a computer component.

DO NOT USE FOR MEDICAL OR LIFE SUPPORT

EQUIPMENT! CyberPower Systems does not sell prod-

ucts for life support or medical applications. DO NOT use

in any circumstance that would affect operation or safety

of any life support equipment or with any medical applica-

tions or patient care.

DO NOT USE WITH OR NEAR AQUARIUMS! To re-

duce the risk of fire or electric shock, do not use with or

near an aquarium. Condensation from the aquarium can

cause the unit to short out.

DESCRIPTION

①

①①

Battery/Surge Outlets

Provides three battery powered/surge outlets for con-

nected equipment and insures temporary uninterrupted

operation of your equipment during a power failure.

②

②②

Full-Time Surge Protection Outlets

Provides three always on surge suppression outlets.

③

③③

Power Switch

Can be used as a mater on/off switch for equipment

connected to the battery power supplied outlets.

④

④④

Power On Indicator

This LED is illuminated when the utility condition is normal

and the UPS outlets are providing power, free of surges

and spikes.

⑤

⑤⑤

Electrical Wiring Fault Indicator

This LED indicator will illuminate to warn the user that a

wiring problem exists, such as bad ground, miss ground

or reversed wiring. If this is illuminated, user is advised to

disconnect all electrical equipment from the outlet and

have an electrician check to ensure the outlet is properly

wired.

⑥

⑥⑥

Circuit Breaker

Located on the side of the UPS, the circuit breaker serves

to provide overload and fault protection. Under normal

operating conditions, the circuit breaker is depressed.

⑦

⑦⑦

Serial Port to PC

This port allows connection and communication from the

DB-9 serial port on the computer to the UPS unit. The

UPS communicates its status to the PowerPanel™ soft-

ware. This interface is also compatible with the UPS

service provided by Windows NT and Windows 2000.

⑧

⑧⑧

Communication Protection Ports

Communication protection ports will protect any standard

modem, fax or telephone line.

⑨

⑨⑨

Outlets Designed for AC Adapters

Allows six AC power adapter blocks to be plugged into the

UPS without blocking adjacent outlets.

INSPECTION

The box should contain the following:

(1) PowerPanel™ software (floppy disk); (1) serial interface cable (DB-9);

(1) telephone communication cable; (1) user manual; (1) warranty registration card;

(1) USB adapter ; (1) UPS unit.

Specyfikacje produktu

Marka:	CyberPower
Kategoria:	zasilacz UPS
Model:	CPS425SL
Kolor produktu:	Czarny
Waga produktu:	3628 g
Czas ładowania:	8 h
Certyfikaty:	UL1778, cUL, FCC DOC B
Napięcie operacyjne wejścia (maksymalne):	- V
Technologia baterii:	Ołowiany (VRLA)
Zakres temperatur (eksploatacja):	0 - 40 °C
Zakres wilgotności względnej:	0 - 95 %
Układ:	Kompaktowy
Częstotliwość danych wejściowych:	60 Hz
Maksymalna temperatura termometru zwilżonego (wet bulb temp.) Podczas eksploatacji (w °f):	32 - 95 °F
Wymiary produktu (SxGxW):	248 x 83 x 159 mm
Typ połączenia wchodzącego:	NEMA 5-15P
Czas odpowiedzi (typowy):	4 ms
Waga (imperialna):	8 funtów
Moc rzeczywista:	230 W
Wymiary (SxGxW) (imperialne):	9.75 x 3.25 x 6.25 "
Szeregowe porty komunikacyjne:	1
Maksymalna możliwa do konfiguracji moc:	0.425 kVA
Napięcie operacyjne wejścia (minimalne):	- V
Napięcie operacyjne wyjścia (maksymalne):	- V
Napięcie operacyjne wyjścia (minimalne):	- V
Wartość znamionowa udaru energii:	585 J
Słyszalny alarm:	Tak
Ilość gniazd sieciowych:	6 x gniazdo sieciowe
Typy wyjść AC:	NEMA 5–15R
Porty modemu rj-11:	3
Typowy czas podtrzymania przy połowie obciążenia:	9 min
Typowy czas podtrzymania przy pełnym obciążeniu:	2 min
Topologia UPS:	Czuwanie (Offline)
Filtr EMI/RFI:	Tak
Kasetka na zapasowe baterie:	BB - BP4-12