Instrukcja obsługi CyberPower OL10000E

CyberPower zasilacz UPS OL10000E

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla CyberPower OL10000E (3 stron) w kategorii zasilacz UPS. Ta instrukcja była pomocna dla 7 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/3

User’s Manual

OL6000ERT3UD

OL8000ERT3UD

OL10000ERT3UD



CyberPower Systems Inc.

www.cpsww.com



K01‐0000220‐00



IMPORTANT SAFETY INSTRUCTIONS

1



This manual contains important instructions. Please read and follow all instructions carefully during installation and operation of the unit. Read this manual

thoroughly before attempting to unpack, install, or operate the UPS.



CAUTION! The UPS must be connected to a grounded AC power

outlet with fuse or circuit breaker protection. DO NOT plug the UPS into

an outlet that is not grounded. If you need to power-drain this equipment,

turn off and unplug the unit.

CAUTION! The battery can power hazardous components inside the

unit, even when the AC input power is disconnected.

CAUTION! The UPS should be placed near the connected equipment

and easily accessible.

CAUTION! To prevent the risk of fire or electric shock, install in a

temperature and humidity controlled indoor area, free of conductive

contaminants. (Please see specifications for acceptable temperature and

humidity range).

CAUTION! (No User Serviceable Parts): Risk of electric shock, do

not remove cover. No user serviceable parts inside. Refer servicing to

qualified service personnel.

CAUTION! (Non-Isolated Battery Supply): Risk of electric shock,

battery circuit is not isolated from AC power source; hazardous voltage

may exist between battery terminals and ground. Test before touching.

CAUTION! To reduce the risk of fire, connect the UPS to a branch

circuit with 40 amperes (OL6000) / 50 amperes (OL8000) / 60 amperes

(OL10000) maximum over-current protection in accordance to CE

requirement.

CAUTION! The AC outlet where the UPS is connected should be close

to the unit and easily accessible.

CAUTION! Please use only VDE-tested, CE-marked mains cable, (e.g.

the mains cable of your equipment), to connect the UPS to the AC outlet.

CAUTION! Please use only VDE-tested, CE-marked power cables to

connect any equipment to the UPS.

CAUTION! When installing the equipment, ensure that the sum of the

leakage current of the UPS and the connected equipment does not

exceed 3.5mA.

CAUTION! The OL6000 / OL8000 / OL10000 models are

permanently-connected equipment and only qualified maintenance

personnel may carry out installations.

CAUTION! Do not unplug the unit from AC Power during operation, as

this will invalidate the protective ground insulation.

CAUTION! To avoid electric shock, turn off and unplug the unit before

installing the input/output power cord with a ground wire. Connect the

ground wire prior to connecting the line wires!

CAUTION! Do not use an improper size power cord as it may cause

damage to your equipment and cause fire hazards.

CAUTION! Wiring must be done by qualified personnel.

CAUTION! DO NOT USE FOR MEDICAL OR LIFE SUPPORT

EQUIPMENT! Under no circumstances this unit should be used for

medical applications involving life support equipment and/or patient care.

CAUTION! DO NOT USE WITH OR NEAR AQUARIUMS! To reduce

the risk of fire, do not use with or near aquariums. Condensation from

the aquarium can come in contact with metal electrical contacts and

cause the machine to short out.

CAUTION! Do not dispose of batteries in fire as the battery may

explode.

CAUTION! Do not open or mutilate the battery, released electrolyte is

harmful to the skin and eyes.

CAUTION! A battery can present a risk of electric shock and high short

circuit current. The following precaution should be observed when

working on batteries

1. Remove watches, rings or other metal objects.

2. Use tools with insulated handles.

CAUTION! The unit has a dangerous amount of voltage. When the

UPS indicators is on, the units may continue to supply power thus the

unit’s outlets may have a dangerous amount of voltage even when it’s not

plugged in to the wall outlet.

CAUTION! Make sure everything is turned off and disconnected

completely before conducting any maintenance, repairs or shipment.

CAUTION! Connect the Protection Earth (PE) safety conductor before

any other cables are connected.

WARNING! (Fuses): To reduce the risk of fire, replace only with the

same type and rating of fuse.

DO NOT INSTALL THE UPS WHERE IT WOULD BE EXPOSED TO

DIRECT SUNLIGHT OR NEAR A STRONG HEAT SOURCE!

DO NOT BLOCK OFF VENTILATION OPENINGS AROUND THE

HOUSING!

DO NOT CONNECT DOMESTIC APPLIANCES SUCH AS HAIR

DRYERS TO UPS OUTPUT SOCKETS!

SERVICING OF BATTERIES SHOULD BE PERFORMED OR

SUPERVISED BY PERSONNEL KNOWLEDGE OF BATTERIES AND

THE REQUIRED PRECAUTIONS. KEEP UNAUTHORIZED

PERSONNEL AWAY FROM BATTERIES!



Specyfikacje produktu

Marka:	CyberPower
Kategoria:	zasilacz UPS
Model:	OL10000E
Kolor produktu:	Czarny
Typ wyświetlacza:	LCD
Wysokość produktu:	616 mm
Szerokość produktu:	265 mm
Głębokość produktu:	660 mm
Waga produktu:	97000 g
Czas ładowania:	5 h
Napięcie operacyjne wejścia (maksymalne):	280 V
Pojemność baterii:	9 Ah
Technologia baterii:	Ołowiany (VRLA)
Wydajność:	95 %
Ilość portów Ethernet LAN (RJ-45):	1
Układ:	Tower
Liczba portów USB 2.0:	1
Częstotliwość danych wejściowych:	40/70 Hz
Diody LED:	Wymiana baterii
Rodzaj chłodzenia:	Aktywne
Port RS-232:	1
Liczba baterii:	20
Dołączone oprogramowanie:	PowerPanel BE
Napięcie baterii:	12 V
Moc rzeczywista:	9000 W
Szeregowe porty komunikacyjne:	1
Maksymalna możliwa do konfiguracji moc:	10 kVA
Napięcie operacyjne wejścia (minimalne):	120 V
Napięcie operacyjne wyjścia (maksymalne):	200 V
Napięcie operacyjne wyjścia (minimalne):	240 V
Funkcje ochrony przed przepięciami:	Fax, Modem, Network, Telephone
Słyszalny alarm:	Tak
Ilość gniazd sieciowych:	10 x gniazdo sieciowe
Typy wyjść AC:	C13 coupler, C19 coupler, Terminal
Porty modemu rj-11:	1
Typowy czas podtrzymania przy połowie obciążenia:	12.5 min
Typowy czas podtrzymania przy pełnym obciążeniu:	4.3 min
Zimny start:	Tak
Funkcje ochrony zasilania:	Krótkie spięcie
Wtyczka:	Terminal
Automatyczny test baterii:	Tak
Ochrona przed nagłym wzrostem napięcia:	Tak
Awaryjne wyłączenie zasilania:	Tak
Auto-restart:	Tak
Przebieg falowy:	Sinus
Filtr EMI/RFI:	Tak
Akumulatory wymieniane podczas pracy:	Tak
Tryby alarmu dźwiękowego:	Wymiana baterii
Regulacja częstotliwości wyjściowej:	50/60 Hz