Instrukcja obsługi CyberPower CP1500EAVRLCD

CyberPower zasilacz UPS CP1500EAVRLCD

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla CyberPower CP1500EAVRLCD (8 stron) w kategorii zasilacz UPS. Ta instrukcja była pomocna dla 9 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/8



K01-0000076-00

CP1350EAVRLCD/CP1500EAVRLCD

User’s Manual



2

IMPORTANT SAFETY INSTRUCTIONS

This manual contains important instructions that should be followed during installation and

maintenance of the UPS and batteries. Please read and follow all instructions carefully during

installation and operation of the unit. Read this manual thoroughly before attempting to

unpack, install, or operate.

CAUTION! The UPS must be connected to a grounded AC power outlet with fuse or circuit

breaker protection. DO NOT plug the UPS into an outlet that is not grounded. If you need to

de-energize this equipment, turn off and unplug the UPS.

CAUTION! DO NOT USE FOR MEDICAL OR LIFE SUPPORT EQUIPMENT! CyberPower

Systems does not sell products for life support or medical applications. DO NOT use in any

circumstance that would affect the operation or safety of any life support equipment, with any

medical applications, or patient care.

CAUTION! The battery can energize hazardous live parts inside even when the AC input

power is disconnected.

CAUTION! To prevent the risk of fire or electric shock, install in a temperature and humidity

controlled indoor area, free of conductive contaminants. (Please see specifications for

acceptable temperature and humidity range).

CAUTION! To reduce the risk of electric shock, do not remove the cover, except to service

the battery. There are no user serviceable parts inside, except for the battery.

CAUTION! To avoid electrical shock, turn off the unit and unplug it from the AC power source

before servicing the battery or installing a computer component.

CAUTION! DO NOT USE WITH OR NEAR AQUARIUMS! To reduce the risk of fire, do not

use with or near aquariums. Condensation from the aquarium can come in contact with metal

electrical contacts and cause the machine to short out.

CAUTION! DO NOT USE WITH LASER PRINTERS! The power demands of laser printers

are too large for a UPS.

INSTALLING YOUR UPS SYSTEM

UNPACKING

The box should contain the following:

(1) PowerPanel® Personal Edition software (CD) x1; (2) USB cable (A+B type) x1; (3) Telephone

communication cable x1; (4) Power cord x2; (5) user manual x1; (6) UPS unit x1.

OVERVIEW

The CP1350EAVRLCD/ CP1500EAVRLCD provides automatic voltage regulation for

inconsistent utility power. The CP1350EAVRLCD/ CP1500EAVRLCD features 1215 Joules

of surge protection, and provides battery backup during power outages. The

CP1350EAVRLCD/ CP1500EAVRLCD ensures consistent power to your computer system

and its included software will automatically save your open files and shutdown your computer

system during a utility power loss.

HOW TO DETERMINE THE POWER REQUIREMENTS OF YOUR

EQUIPMENT

1.Make sure that the total Volt-Amp (VA) requirements of your computer, monitor, and

peripheral equipment does not exceed 1350 VA/ 1500VA.

2.Ensure that the equipment plugged into the battery power-supplied/surge outlets does

not exceed the UPS unit's rated capacity (1350VA/810W for CP1350EAVRLCD, 1500VA

3

/900W for CP1500EAVRLCD). If the rated unit capacities are exceeded, an overload

condition may occur and cause the UPS unit to shut down and the circuit breaker to trip.

3.If the power requirements of your equipment are listed in units other than Volt-Amps (VA),

convert Watts (W) or Amps (A) into VA by performing the calculations below. Note: The

equation listed below only calculates the maximum amount of VA that the equipment can EN

use, not what is typically used by the equipment at given time. Users should expect usage

requirements to be approximately 60% of the maximum power requirements:

Watts (W) x 1.67 = VA or Amps (A) x 230 = VA

Add the totals up for all pieces of equipment and multiply this total by 0.6 to calculate the

approximate requirements.

There are many factors that can affect the amount of power that your computer system will

require. The total load that you will be placing on the battery-powered outlets should not

exceed 80% of the unit's capacity.

BASIC OPERATION

DESCRIPTION

①

①① Power Switch

Used as the master on/off switch for equipment

connected to the battery power supplied outlets.

②

②② Power On Indicator

This LED is under the power switch. It illuminates

when the UPS outlets are providing power, free of

surges and spikes.

③

③③ LCD Module Display

High resolution and intelligent LCD display shows

all the UPS information with icons and messages.

For more information please check the “Definitions for Illuminated LCD Indicators” section.

④

④④ LCD Display Toggle/Selected Switch

The switch can be used to select the LCD display contents including Input Voltage, Output Voltage

and Estimated Run Time. The toggle frequency is set to one time per second. Holding the switch

for more than two seconds while running on battery will silence the buzzer.

⑤

⑤⑤ USB Port to PC

The USB port allow communication from the UPS to the computer. The UPS communicates its

status to the PowerPanel® Personal Edition software when connected with a USB port.

⑥

⑥⑥ Battery and Surge Protected Outlets

The unit has three battery powered/surge protected outlets for connected equipment and ensures

temporary uninterrupted operation of your equipment during a power failure.

⑦

⑦⑦ Full-Time Surge Protection Outlets

The unit has three always on surge suppression outlets.

⑧

⑧⑧ Communication Protection Ports

Communication protection ports will protect any standard modem, fax, telephone line, broadband

network or Ethernet connection.

⑨

⑨⑨ AC Input

Connect the AC Power cord to a properly wired and grounded outlet.

⑩

⑩⑩ Circuit Breaker

Located on the side of the UPS, the circuit breaker serves to provide overload and fault protection.

①

①①

②

②②

③

③③

④

④④

⑤

⑤⑤

⑧

⑧⑧

⑨

⑨⑨

⑩

⑩⑩

⑦

⑦⑦

⑥

⑥⑥

Specyfikacje produktu

Marka:	CyberPower
Kategoria:	zasilacz UPS
Model:	CP1500EAVRLCD
Kolor produktu:	Czarny
Waga produktu:	12100 g
Czas ładowania:	8 h
Technologia baterii:	Ołowiany (VRLA)
Zgodny z Mac:	Tak
Ilość portów Ethernet LAN (RJ-45):	1
Zakres temperatur (eksploatacja):	0 - 40 °C
Zakres wilgotności względnej:	0 - 95 %
Liczba portów USB 2.0:	1
Częstotliwość danych wejściowych:	47/63 Hz
Diody LED:	Tak
Zakres temperatur (przechowywanie):	-15 - 45 °C
Wymiary produktu (SxGxW):	100 x 374 x 249 mm
Czas odpowiedzi (typowy):	6 ms
System operacyjny:	Windows 98/Me/2000/NT/XP/Vista, Linux
Moc rzeczywista:	900 W
Maksymalna możliwa do konfiguracji moc:	1.5 kVA
Słyszalny alarm:	Tak
Porty modemu rj-11:	1
Wartość nominalna napięcia wyjściowego:	230 V
Filtr EMI/RFI:	Tak