Instrukcja obsługi CyberPower CP1350PFCLCD

CyberPower zasilacz UPS CP1350PFCLCD

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla CyberPower CP1350PFCLCD (10 stron) w kategorii zasilacz UPS. Ta instrukcja była pomocna dla 9 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/10

PFC SINEWAVE UPS SERIES

CP1350PFCLCD/1500PFCLCD

USER MANUAL

YOUR ULTIMATE ALLY IN POWER

Cyber Power Systems (USA), Inc.

4241 12th Avenue East, Suite 400 | Shakopee, MN 55379 | CyberPowerSystems.com

FEATURES

1. Power Switch

2. Power On Indicator

3. LCD Module Display

4. Down/Display Button

5. Up/Mute Button

6. Enter/Setup Button

7. USB charge ports

(Except for CP1350PFCLCD)

8. Battery and Surge Protected Outlets

9. Full-Time Surge Protection Outlets

10. Circuit Breaker

11. DB9/USB Ports to PC

12. Wiring Fault Indicator (red)

13. Communication Protection Ports (RJ45)

14. SNMP/HTTP Network Slot

(Except for CP1350PFCLCD)

15. Widely-Spaced Outlets Designed

for AC Adapters

Thank you for purchasing a CyberPower product. This UPS is designed to provide unsurpassed

power protection, operation, and performance during the lifetime of the product. Please take a

few minutes to register your product at: www.CyberPowerSystems.com/registration.

Registration certiﬁes your product’s warranty, conﬁrms your ownership in the event of a product

loss or theft, and entitles you to free technical support. Register your product now to receive the

beneﬁts of CyberPower ownership.

CAUTION! To prevent the risk of ﬁre or

electric shock, install in a temperature and

humidity controlled indoor area free of

conductive contaminants. (Please see

speciﬁcations for acceptable temperature

and humidity range.)

CAUTION! To reduce the risk of electric shock,

do not remove the cover except to service the

battery. Turn o and unplug the unit before

servicing the batteries. There are no user ser-

viceable parts inside except for the battery.

CAUTION! Hazardous live parts inside can be

energized by the battery even when the AC

input power is disconnected.

CAUTION! The UPS must be connected to an

AC power outlet with fuse or circuit breaker

protection. Do not plug into an outlet that is

not grounded. If you need to de-energize this

equipment, turn o and unplug the unit.

CAUTION! To avoid electric shock, turn o the

unit and unplug it from the AC power source

before installing a computer component.

CAUTION! To reduce the risk of ﬁre, connect

only to a circuit provided with 20 amperes

maximum branch circuit over current protec-

tion in accordance with the National Electric

Code, ANSI/NFPA 70.

CAUTION! Not for use in a computer room as

deﬁned in the Standard for the Protection of

Electronic Computer/Data Processing Equip-

ment, ANSI/NFPA 75.

CAUTION! Do not dispose of batteries in a ﬁre.

The batteries may explode.

CAUTION! Do not open or mutilate batteries.

Released electrolyte is harmful to the skin and

eyes. It may be toxic.

DO NOT USE FOR MEDICAL

OR LIFE SUPPORT EQUIPMENT!

CyberPower Systems does not sell products

for life support or medical applications. DO

NOT use in any circumstance that would aect

operation and safety of life support equip-

ment, any medical applications or patient care.

DO NOT USE WITH OR NEAR AQUARIUMS!

To reduce the risk of ﬁre or electric shock, do

not use with or near an aquarium. Condensa-

tion from the aquarium can cause the unit to

short out.

DO NOT USE THE UPS

ON ANY TRANSPORTATION!

To reduce the risk of ﬁre or electric shock, do

not use the unit on any transportation such

as airplanes or ships. The eect of shock or

vibration caused during transit and the damp

environment can cause the unit to short out.

PRODUCT REGISTRATION

IMPORTANT SAFETY WARNINGS (SAVE THESE INSTRUCTIONS)

This manual contains important safety instructions. Please read and follow all instructions carefully

during installation and operation of the unit. Read this manual thoroughly before attempting to

unpack, install, or operate your UPS.

INSTALLING YOUR UPS SYSTEM

UNPACKING

Inspect the UPS upon receipt.

The box should contain the following:

(a) UPS unit

(b) User’s manual

(d) Function Setup Guide

PowerPanel® software is available on our

website. Please visit www.cyberpowersystems.

com and go to the Software Section for a free

download.

SUPPORTS Active PFC POWER SUPPLIES

This CyberPower UPS system supports High

Eciency power supplies with Active Power

Factor Correction (Active PFC). Active PFC is

used to improve the eciency of power delivery.

The current US Energy Star® Program Require-

ments for Computers (version 7.1) mandates

Active PFC for all power supplies over 100

watts. Additionally, programs such as 80 Plus®

are often used to identify high eciency power

supplies with Active PFC.

OVERVIEW

The CP1350PFCLCD/CP1500PFCLCD provides

complete power protection from utility power

that is not always consistent and features 1445

Joules of surge protection. All units provide long

lasting battery backup during power outages with

maintenance free batteries. The CP1350PFCLCD/

CP1500PFCLCD ensures consistent power to your

computer system and includes software that will

automatically save your open ﬁles and shutdown

your computer system during a utility power loss.

AUTOMATIC VOLTAGE REGULATOR

The CP1350PFCLCD/CP1500PFCLCD stabilizes

inconsistent utility power voltage to nominal

levels that are safe for equipment. Inconsistent

incoming utility power may be damaging to

important data ﬁles and hardware, but with

Automatic Voltage Regulation (AVR), damaging

voltage levels are corrected to safe levels.

AVR automatically increases low utility power

to a consistent and safe

110/120 volts. If incoming

utility voltage drops

below 90 volts, or exceeds

140 volts the units auto-

matically switch to battery

back-up power.

DETERMINE THE POWER REQUIREMENTS

OF YOUR EQUIPMENT

1. Ensure that the equipment plugged into

the UPS does not exceed the UPS unit’s

rated capacity. If the rated capacities of the

unit are exceeded, an overload condition

may occur and cause the UPS unit to shut

down or the circuit breaker to trip.

2. There are many factors that can aect

the amount of power that your electronic

equipment will require. For optimal system

performance keep the load below 80% of

the unit’s rated capacity.

HARDWARE INSTALLATION GUIDE

1. Your new UPS may be used immediately

upon receipt. However, after receiving a

new UPS, to ensure the battery’s maximum

charge capacity, it is recommended that

you charge the battery for at least 8 hours.

Your UPS is equipped with an auto-charge

feature. When the UPS is plugged into an

AC outlet, the battery will automatically

charge whether the UPS is turned on or

turned o.

Note: This UPS is designed with a safety

feature to keep the system from being

turned on during shipment. The ﬁrst time

you turn the UPS on, you will need to have

it connected to AC power or it will not

power up.

2. With the UPS unit turned o and unplugged,

connect your computer, monitor, and any

other peripherals requiring battery backup

into the battery power supplied outlets.

Plug the other peripheral equipment (eg.

printer, scanner, speakers, etc.) into the

full time surge protection outlets. DO NOT

plug a laser printer, paper shredder, copier,

space heater, vacuum cleaner, sump pump

or other large electrical device into the

“Battery and Surge Protected Outlets”.

The power demands of these devices will

overload and possibly damage the unit.

- continued

Specyfikacje produktu

Marka:	CyberPower
Kategoria:	zasilacz UPS
Model:	CP1350PFCLCD
Kolor produktu:	Czarny
Typ wyświetlacza:	LCD
Długość kabla:	1.52 m
Certyfikat środowiskowy (zrównoważonego rozwoju):	RoHS
Czas ładowania:	8 h
Certyfikaty:	UL1778, cUL 107.3, FCC DOC Class B
Technologia baterii:	Ołowiany (VRLA)
Ilość portów Ethernet LAN (RJ-45):	1
Zakres temperatur (eksploatacja):	0 - 40 °C
Zakres wilgotności względnej:	0 - 90 %
Układ:	Tower
Liczba portów USB 2.0:	2
Rodzaj baterii:	12V/7AH
Częstotliwość danych wejściowych:	60 Hz
Diody LED:	Tak
Dołączone oprogramowanie:	PowerPanel Personal Edition
Waga (imperialna):	20.3 funtów
Moc rzeczywista:	810 W
Wymiary (SxGxW) (imperialne):	3.9 x 14.2 x 10.4 "
Szeregowe porty komunikacyjne:	1
Maksymalna możliwa do konfiguracji moc:	1.35 kVA
Wartość znamionowa udaru energii:	1030 J
Słyszalny alarm:	Tak
Ilość gniazd sieciowych:	10 x gniazdo sieciowe
Typy wyjść AC:	NEMA 5–15R
Porty modemu rj-11:	1
Typowy czas podtrzymania przy połowie obciążenia:	9 min
Typowy czas podtrzymania przy pełnym obciążeniu:	3 min
Wartość nominalna napięcia wyjściowego:	120 V
Wartość nominalna napięcia wejściowego:	90-140 V
Ochrona przed przeciążeniem:	Tak
Awaryjne wyłączenie zasilania:	Nie
Topologia UPS:	Technologia line-interactive
Akumulatory wymieniane podczas pracy:	Nie