Instrukcja obsługi Currys Essentials C140IR10

Currys Essentials Okowy C140IR10

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Currys Essentials C140IR10 (5 stron) w kategorii Okowy. Ta instrukcja była pomocna dla 8 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/5

SAFETY FIRST!

Please follow all the safety precautions listed below for safety and to reduce the risk

of injury or electrical shock.

• Read all the instructions before operating the appliance and keep them for future

reference. If you pass the product on to a third party, include these instructions.

• Unplug the iron from the mains socket when not in use, and before emptying,

ﬁlling, or cleaning.

• Do not touch the soleplate of the iron if it is hot.

• Always hold the appliance by the handle.

• Keep the appliance well away from surfaces and objects that can be damaged by

heat.

• Ensure there is adequate room to operate the iron.

• Ensure that the iron cannot fall into water.

• Do not immerse the mains cable in any liquid.

• Do not let the mains cable overhang the edge of the work surface or allow it to

touch hot surfaces or sources of heat or ﬂame.

• If any part of this appliance is damaged or malfunctions in any way, or the mains

cable or mains plug is broken do not continue to use it. Seek expert assistant.

• Do not use the iron if water is leaking from it.

• This appliance is not intended for use by persons (including children) with reduced

sensory or mental capabilities, or lack of experience and knowledge unless they

have been given supervision or instructions concerning the use of the appliance

by a person responsible for their safety.

• Children should be supervised to ensure that they do not play with the appliance.

• Parents must warn children not to touch hot appliance parts. Close supervision is

necessary when an appliance is used near children.

• Small children should not use this appliance.

• Do not leave the iron face down at any time. Stand it upright on its heel, on a level

heatproof surface.

• Do not use outdoors or in damp or wet conditions.

• When placing the iron on its stand, ensure that the surface on which the stand is

placed is stable.

• Do not use this iron for professional laundry services.

• Do not use this appliance for any purpose not covered by the instructions.

• Use caution when turning the iron upside down, there may be hot water in the

water tank.

• Use this iron only with a purpose-built ironing board.

• Observe all ironing instructions and ironing temperature dot settings given by the

garment manufacturer. These are normally on a label or labels inside the garment.

• If the mains cable is damaged it must be replaced by the manufacturer, its service

agent, or similarly qualiﬁed persons in order to avoid a hazard.

• The iron must not be left unattended while it is connected to the mains socket.

• Do not use this iron if it is dropped, has visible signs of damage or is not

watertight.

CARE AND CLEANING

After use, unplug the iron from the mains socket and allow it to cool down fully.

Cleaning:

To remove starch or other deposits from the soleplate, apply a small amount of mild

cleaner to a damp cloth, forming a paste on the cloth. Gently rub the soleplate, then

wipe with a moist cloth.

The body of the iron may now be cleaned with a barely damp cloth and then dried

thoroughly.

Do not wet the appliance body, mains cable or mains plug.

Storage:

When not in use the iron should be securely stored out of the reach children. Store the

iron on its heel with the mains cable loosely looped around the body. Do NOT store

the iron on its soleplate or you may damage the ﬁnish.

Never use scouring pads, abrasives or harsh cleaners on the iron body or the

soleplate as this may scratch the surface.

GB - 4 GB - 5

Congratulations on the purchase of your new Currys Essentials

Steam Iron.

We recommend that you spend some time reading this instruction manual in

order to fully understand all the operational features it oers.

Read all the safety instructions carefully before use and keep this instruction

manual for future reference.

S T E AM I R O N

INSTRUC TION MANUAL

C140IR10

DSG Retail Ltd. Maylands Avenue Hemel Hempstead

Hertfordshire HP2 7TG England

Visit Partmaster.co.uk today for the easiest way

to buy electrical spares and accessories. With

over 1 million spares and accessories available

we can deliver direct to your door the very next

day. Visit www.partmaster.co.uk or call 0870 6001 338 (UK customers only) Calls

charged at National Rate.

This symbol on the product or in the instructions means that your

electrical and electronic equipment should be disposed at the end of its

life separately from your household waste. There are separate collection

systems for recycling in the EU. For more information, please contact the

local authority or your retailer where you purchased the product.

SPECIFICATIONS

Voltage Rating: 230V ~50Hz

Power consumption: 1400W

We continually strive to improve our products, speciﬁcations may change without

prior notice.

ma x

OPERATION

• Fill the iron with water as described above.

• Place the iron on its heel on the ironing board rest and connect

the mains cable to the mains socket.

• Switch on the power. The mains indicator will illuminate.

• Select the correct temperature by turning the Temperature Dial.

Turn clockwise to increase and anticlockwise to reduce temperature.

Note: Some parts have been lightly greased and the iron might smoke slightly when

switched on for the ﬁrst time. After a short while, this will cease. We

recommend passing the iron over a clean cotton cloth before using it for the

ﬁrst time. The mains indicator will turn “OFF” when the indicated setting reaches

the correct temperature. The iron is now ready for use. During use the indicator

will light on and oﬀ as the thermostat maintains the iron at the correct

temperature setting.

ELECTRICAL INFORMATION

Before using this appliance ensure that the voltage of your electricity supply matches the

voltage indicated on the rating plate of the appliance.

THIS APPLIANCE MUST BE EARTHED.

The ultimate disconnection from the power source is the mains plug. Always make sure it is

easily accessible to be unplugged in the event of an emergency.

This appliance is ﬁtted with a fused three pin mains plug to BS 1363 which is suitable for

use in all houses ﬁtted with mains sockets to current speciﬁcations.

If the ﬁtted mains plug is not suitable, remove the fuse and dispose of the mains plug

safely, immediately after removing it from the mains cable.

Fitting a new mains plug

If for any reason you need to ﬁt a new mains plug, the mains cable must be connected as

shown here. The wires in the mains cable ﬁtted to this appliance are coloured in

accordance with the following code:

If the colours of the wires in the mains cable

of this appliance do not correspond with the

coloured markings identifying the terminals

in your mains plug, proceed as follows:

The wire which is coloured

• Green and Yellow: MUST be connected to

the terminal which is marked with the

letter E (Earth) or symbol or coloured

Green.

• Blue: MUST be connected to the terminal

which is marked with the letter N (Neutral)

or coloured Blue or Black.

• Brown MUST be connected to the terminal

which is marked with the letter L (Live) or

coloured Brown or Red.

Before reﬁtting the mains plug cover, check that there are no cut or stray strands of wire

inside the mains plug. Only BSI or ASTA approved 13 Amp BS1362 fuses should be used. If

you are in any way unsure which mains plug or fuse to use, always refer to a qualiﬁed

electrician.

Note: After replacing or changing a fuse on a moulded mains plug which has a fuse cover,

the cover must be reﬁtted to the mains plug, the appliance must not be used without a

fuse cover. If lost, replacement fuse covers can be obtained from an electrical shop.

STEAM IRONING

Steam ironing should be carried out at the highest settings on the Temperature Dial.

Steam ironing at lower temperatures may cause water to leak from the soleplate. The

steam is regulated by the Steam button.

8. Handle

9. Cord Grip

10. Mains Indicator

11. Temperature Dial

12. Filler Cup

13. max Water Level Mark

1. “Shot of Steam” Button

2. Spray Button

3. Steam Button

4. Water Filler

5. Spray Nozzle

6. Water Reservoir

7. Iron Soleplate

Maintaining the ﬁnish of the iron’s soleplate is essential. Keep the soleplate

smooth: do not scratch it on metal objects (e.g. the edge of the ironing

board, buttons, zippers, etc.) as these may impair performance.

The iron gives oﬀ steam continuously only if you hold the iron horizontally.

You can stop the continuous steam by placing the iron in a vertical position

or by keeping the Steam button depressed for more than 5 seconds.

To avoid staining, do not use the spray on silk

or synthetics, and be very careful when you

iron delicate fabrics.

SPRAY BUTTON

Press the Spray button to spray water on the fabric. It may be used during steam and

dry ironing.

During ironing:

In between operations and when ﬁlling the iron always stand the iron on its heel.

NEVER leave the iron face down.

After you have nished ironing:

Switch the iron oﬀ at the mains socket and unplug.

Stand the iron on its heel and let the iron completely

cool down .

When the iron is cool:

Invert the iron and pour away the excess water

from the water reseroir. When pouring away the water,

gently shake the iron to remove any loose

particles from the tank.

For spray and shot of steam functions to

operate, the water tank must be at least

one-quarter full. If these features stop

working, stand the iron on its heel and ﬁll the

water tank.

Steam position: OFF

Press the Steam button to

cut oﬀ the steam discharge.

Steam position: ON

Press the Steam button

to discharge steam.

CONNECT GREEN AND YELLOW EARTH (E)TO

CONNECT

BLUE TO

NEUTRAL (N)

MAKE SURE THE OUTER

SHEATH OF THE MAINS

CABLE IS SECURELY HELD

BY THE CLAMP

CONNECT

BROWN TO

LIVE (L)

13 FUSEAMP

GB - 1 GB - 2 GB - 3

UNPACKING

Remove all packaging from the iron. Retain the packaging. If you dispose of it please do so

according to any local regulations.

The following items are included:

• The Main Unit • One ﬁller cup (P.N.: 123V0-11)

• Instruction Manual (P.N.: 623V0-1982DNS-2-N)

If items are missing or damaged, please contact Partmaster (UK only)

Tel: 0870 6001 338 for assistance.

PRODUCT OVERVIEW

FIRST TIME USE

Inspect the iron carefully.

Check that the voltage marked on the rating label matches your mains voltage.

Remove any protective ﬁlm from the soleplate. Polish the soleplate lightly with a clean

soft cloth to remove any residues.

IRONING TEMPERATURES

Check the ironing instructions attached to the article (they are on a label showing a

symbol of an iron). Always follow these ironing instructions. The indications on the

iron’s temperature dial and the table below will help you.

If there are no ironing

instructions but you know the

fabric, then use the table below.

The table is valid only for the

actual material and does not take

account of any ﬁnish applied to

the fabric. Fabrics to which a

ﬁnish has been applied (wrinkle

relief, printed T shirts etc.) should

be ironed at a lower temperature.

If the fabric contains mixed ﬁbres, select the lowest ironing temperature of the

composition, e.g. iron a 60% polyester / 40% cotton mix at the temperature indicated

for polyester.

The iron heats up quicker than it cools down. Sort fabrics to be ironed into groups

according to temperature: wool with wool, cotton with cotton, etc. Start by ironing

articles requiring low temperature settings and progress to higher ones.

Note: Do not iron garments that are dirty or stained. The iron’s heat may set the stain.

Pure (100%) wool fabrics may be pressed with the iron set to a steam position and the

garment protected by a dry cloth.

Garment Label Fabric Type Thermostat Regulation

Synthetic

•

Low temperature

Silk-wool

• •

Medium temperature

Cotton-linen

• • •

High temperature

Fabric not to be ironed

INCREASEDECREASE

713

MAX

Do not ﬁll the iron above the mark indicated on the side of the iron. max

FILLING THE IRON

Make sure the iron is unplugged from the mains

socket and the button is at Steam Steam OFF

position .

Tip the iron up slightly and ﬁll it carefully with

fresh water using the supplied ﬁller cup.

If you live in a hard water area, it is advisable to

use distilled or de-mineralised water. Avoid

using water containing softeners, perfumes or

additives.

MAX

max

SHOT OF STEAM BUTTON

This feature may be used during steam or dry

ironing but only when the iron is at its highest

setting.

Press the Shot of Steam button to release a

powerful surge of steam. You may need to press the

button a few times to prime the surge of steam.

Wait a few seconds for the steam to penetrate the

fabric before pressing the button again.

Excessive use of this feature will cause the iron to

cool, and the mains indicator will illuminate. If this

happens, wait for the mains indicator to go out

before using the feature again.

ma x

Specyfikacje produktu

Marka:	Currys Essentials
Kategoria:	Okowy
Model:	C140IR10

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Currys Essentials C140IR10, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą

Twoje imię*

Twój email*

Napisz tutaj swoje pytanie

Instrukcje Okowy Currys Essentials

Currys Essentials C140IR10 Instrukcja

4 Lipca 2024

Instrukcje Okowy

Najnowsze instrukcje dla Okowy

Tefal FV9250 Program8 Instrukcja

15 Października 2024

Termozeta Lella Instrukcja

15 Października 2024

Black & Decker IR1160NC Instrukcja

14 Października 2024

Scarlett SC-131S Instrukcja

13 Października 2024

Bosch TDI953222V Instrukcja

13 Października 2024

Alpina SF-1303 Instrukcja

13 Października 2024

ECG NZ 260 Instrukcja

12 Października 2024

Day 72443 Instrukcja

12 Października 2024

Clatronic DBS 3001 Instrukcja

12 Października 2024

Orbegozo SV 2210 Instrukcja

11 Października 2024