Instrukcja obsługi Cuisinart SPI-50

Cuisinart maszyna do cięcia SPI-50

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Cuisinart SPI-50 (21 stron) w kategorii maszyna do cięcia. Ta instrukcja była pomocna dla 8 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/21
PrepExpressTM Attachment
INSTRUCTION AND
RECIPE BOOKLET
SPI-50
For your safety and continued enjoyment of this product, always read the Instruction Book carefully before using.
2
IMPORTANT
SAFEGUARDS
When using electrical appliances,
especially when children are
present, basic safety precautions
should always be taken, including
the following:
1. READ ALL INSTRUCTIONS
BEFORE USING.
2. Cutting Cones are sharp.
Handle them carefully. Inspect
blade prior to use for damage.
Do not use blade if damaged.
3. Switch off and unplug your
Cuisinart® Stand Mixer before
tting or removing the
PrepExpressTM Attachment,
after use and before cleaning.
4. Close supervision is necessary
when any appliance is used by
or near children or individuals
with certain disabilities.
Cuisinart does not recommend
the use of this appliance by
children or individuals with
certain disabilities.
5. Keep hands and other utensils
away from Cutting Cones while
processing food to prevent the
possibility of severe personal
injury or damage.
6. Avoid coming into contact
with moving parts. Never push
food down Feed Tube by hand.
Always use Pusher.
7. Store Cutting Cones as you would
sharp knives. Keep out of reach
of children.
8. The use of attachments not
recommended or sold by
Cuisinart may cause re,
electric shock or injury.
9. Be sure the Feed Tube is
securely locked in place
before operating.
10. Do not use more than one
attachment at a time.
11. Do not use the stand mixer or
attachment if it is damaged
or if the cord is damaged. Have
it checked and serviced before
resuming use.
12. Do not use this attachment
for anything other than its
intended use.
13. Do not use outdoors.
14. To protect against the risk of
electric shock, do not put the
base power unit in water or
other liquids.
15. Do not let cord hang over
edge of table or counter.
16. Never leave your Spiralizer
Attachment unattended while
the stand mixer is running.
17. The attachments are intended
for use with the basic appliance
SM-50.
18. Do not operate your appliance in an
appliance garage or under a wall
cabinet. When storing in an
appliance garage, always unplug the
unit from the electrical outlet. Not
doing so could create a risk ofre,
especially if the appliance touches
the walls of the garage or the door
touches the unit as it closes.
SAVE THESE
INSTRUCTIONS
FOR HOUSEHOLD
USE ONLY
Refer to stand mixer manual for
stand mixer operating instructions.
IMPORTANT: Always unplug
the Cuisinart
®
Stand Mixer from
outlet when assembling and
disassembling.
3
CONTENTS
Important Safeguards .................... 2
Unpacking Instructions.................. 3
Parts and Features ........................ 4
Accessories ...................................5
Operating Instructions ................... 6
Cleaning, Storage
and Maintenance ........................... 7
Tips and Hints ...............................7
Warranty ........................................ 8
Recipes ........................................ 10
WARNING: RISK OF
FIRE OR ELECTRIC
SHOCK
The lightning flash with
arrowhead symbol within
an equilateral triangle is
intended to alert the user
to the presence of
uninsulated, dangerous
voltage within the product’s
enclosure that may be of
sufficient magnitude to
constitute a risk of fire or
electric shock to persons.
The exclamation point
within an equilateral triangle
is intended to alert the
user to the presence of
important operating and
maintenance (servicing)
instructions in the
literature accompanying
the appliance.
UNPACKING
INSTRUCTIONS
CAUTION: THE CUTTING CONES
HAVE VERY SHARP EDGES.
To avoid injury when unpacking
the parts, please follow these
instructions.
1. Place the box on a low table or
oor next to the kitchen counter
where you’ll use the appliance.
Be sure the box is right side up,
then open the box.
2. Remove the Instruction Book
and the whole set pulp mold.
(The cleaning brush and angled
pusher are in the back of the set
pulp mold.)
3. Place the whole set pulp mold on a
at surface. Remove the Cleaning
Brush, Angled Pusher and the
upper pulp mold. Then take out
the main body, Straight Pusher,
Cutting Cones, Straight Feed Tube
and Angled Feed Tube, in that
order, from the bottom pulp mold.
4. Remove the packing materials
and return to the box.
Angled
Pusher
Straight
Pusher
Main Body
Straight
Feed Tube
Cleaning
Brush
Cutting
Cones
Angled
Feed Tube

Specyfikacje produktu

Marka: Cuisinart
Kategoria: maszyna do cięcia
Model: SPI-50

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Cuisinart SPI-50, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje maszyna do cięcia Cuisinart

Cuisinart

Cuisinart FS-75 Instrukcja

21 Września 2024
Cuisinart

Cuisinart SPI-50 Instrukcja

12 Września 2024
Cuisinart

Cuisinart CTG-00-MANG Instrukcja

12 Września 2024
Cuisinart

Cuisinart CTG-00-MAN Instrukcja

8 Maja 2024

Instrukcje maszyna do cięcia

Najnowsze instrukcje dla maszyna do cięcia

Royal Catering

Royal Catering RCGT-1 Instrukcja

31 Stycznia 2025
Genius

Genius Nicer Dicer Quick Instrukcja

11 Stycznia 2025
Eldom

Eldom Sliss KR350 Instrukcja

11 Stycznia 2025
RGV

RGV Desy AF 220 AM Instrukcja

10 Stycznia 2025
RGV

RGV Desy AF 275 F Instrukcja

10 Stycznia 2025
Royal Catering

Royal Catering RCKS-3 Instrukcja

10 Stycznia 2025
Royal Catering

Royal Catering RCKS-2 Instrukcja

10 Stycznia 2025
Ovela

Ovela OVSAFSLCERA Instrukcja

5 Stycznia 2025
Royal Catering

Royal Catering RCAM-250 Instrukcja

3 Stycznia 2025
Royal Catering

Royal Catering RCES-215/12 Instrukcja

31 Grudnia 2025