Instrukcja obsługi Creality3D CR-10S Pro V2
Creality3D
drukarka 3D
CR-10S Pro V2
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Creality3D CR-10S Pro V2 (16 stron) w kategorii drukarka 3D. Ta instrukcja była pomocna dla 4 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek
Strona 1/16
CR-10S Pro Printer
Guide Boo
◆This guide book is for standard CR-10S Pro.
◆Please plug the power cord into a three-hole power jack.
◆Detailed instructions for use are available on the TF card.
.1.0
To be the Chief Evangelist
To make Top-quality 3D
Contents
1. Introduction....................................1
2. General List.....................................2
3. Device Installation..........................3
4. Cable Connection............................4
5. Screen Information.........................5
6. Loading Filament............................6
7. Bed Leveling......................................7
8. Software Installation........................9
9. For the First Printing........................10
10. Circuit Wiring...................................11
11. After-Sales Services..........................12
Preface
Dear consumers,
Thank you for choosing our products. For the best experience, please read the instructions before operating the Printer.
Our 3D team will always be ready to give you the best service. Please contact us via the phone number or e-mail address
provided at the end when you encounter any problem with the Printer.
For a better experience in using our product, you may learn how to use the Printer in the following ways:
1. View the accompanied instructions and videos on the TF card.
2. Visit our official website at You will find relevant software/hardware information, contact details and www.creality3d.cn
operation and maintenance instructions on the website.
Notes
1. Do not use the printer any way other than described herein in order to avoid personal injury or property
damage.
2. Do not place the printer near any heat source or flammable or explosive objects. We suggest placing it in a
well-ventilated, low-dust environment.
3. Do not expose the printer to violent vibration or any unstable environment, as this may cause poor print
quality.
4. Before using experimental or exotic filaments, we suggest using standard filaments such as ABS or PLA to
calibrate and test the machine.
5. Do not use any other power cable except the one supplied. Always use a grounded three-prong power
outlet.
6. Do not touch the nozzle or printing surface during operation as they may be hot. Keep hands away from
machine while in use to avoid burns or personal injury.
7. Do not wear gloves or loose clothing when operating the printer. Such cloths may become tangled in the
printers moving parts leading to burns, possible bodily injury, or printer damage.
8. When cleaning debris from the printer hotend, always use the provided tools. Do not touch the nozzle
directly when heated. This can cause personal injury.
9. Clean the printer frequently. Always turn the power off when cleaning, and wipe with a dry cloth to remove
dust, adhered printing plastics or any other material off the frame, guide rails, or wheels . Use glass cleaner
or isopropyl alcohol to clean the print surface before every print for consistent results.
10. Children under 10 years of age should not use the printer without supervision.
Specyfikacje produktu
| Marka: | Creality3D |
| Kategoria: | drukarka 3D |
| Model: | CR-10S Pro V2 |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z Creality3D CR-10S Pro V2, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje drukarka 3D Creality3D
16 Września 2024
14 Września 2024
Instrukcje drukarka 3D
- drukarka 3D LulzBot
- drukarka 3D Kodak
- drukarka 3D MakerBot
- drukarka 3D Flashforge
- drukarka 3D Renkforce
- drukarka 3D Velleman
- drukarka 3D Anker
- drukarka 3D Creality
- drukarka 3D Exibel
- drukarka 3D Monoprice
- drukarka 3D XYZprinting
- drukarka 3D Craftbot
- drukarka 3D Leap Frog
- drukarka 3D Anycubic
- drukarka 3D German RepRap
- drukarka 3D Wanhao
- drukarka 3D Artillery
- drukarka 3D GooVer
- drukarka 3D Easy Threed
- drukarka 3D Zortrax
- drukarka 3D SINDOH
- drukarka 3D PP3DP
- drukarka 3D Wasp
- drukarka 3D 3D Systems
- drukarka 3D Raise3D
Najnowsze instrukcje dla drukarka 3D
7 Października 2024
7 Października 2024
4 Października 2024
4 Października 2024
4 Października 2024
4 Października 2024
4 Października 2024
4 Października 2024
4 Października 2024
4 Października 2024