Instrukcja obsługi Cramer A82TXT

Cramer Niesklasyfikowane A82TXT

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Cramer A82TXT (48 stron) w kategorii Niesklasyfikowane. Ta instrukcja była pomocna dla 5 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/48
cramer.eu
2903086 (Tiller)
EN | DE | ES | IT | FR | PT | NL | RU| FI | SV | NO| DA| PL | CS | SK | SL| HR| EL|
AR | TR | LT | LV | ET |
2cramer.eu
EN
Product Overview
Your machine has been engineered and manufactured to high standard for
dependability, ease of operation, and operator safety. When properly cared for, it
will give you years of trouble-free performance.
Know your Cultivator
1. Tine
2. Gear box
3. Guard
4. Rubber protector
5. Lower shaft
6. Release button
7. Knob
Assembly
•This product requires assembly.
•Carefully remove the product and any accessories from the box. Make sure
that all items listed in the packing list are included.
•Inspect the product carefully to make sure no breakage or damage
occurred during shipping.
•Do not discard the packing material until you have carefully inspected and
satisfactorily operated the product.
Install the Attachment (See Figure 2)
1 Remove the rubber protector.
2 Loosen the knob on the coupler.
3 Push in the release button located on the lower shaft. Align the release
button with the positioning hole and slide the two shafts together. Rotate the
lower shaft until the button locks into the positioning hole.
4 Tighten the knob securely.
NOTE: If the button does not release completely in the positioning hole, the
shafts are not locked into place. Slightly rotate from side to side until the button is
locked into place.
Operation
Applications
•Breaking up garden soil to prepare seed bed for planting.
•Shallow cultivating to remove weeds.
Preparing The Seed Bed
The cultivator can be used to break up garden soil and prepare a seedbed for
planting. Plan ahead to leave enough room between the seed rows to allow for
machine cultivating after the plants have grown.
Several passes over the same path may be required to reach the desired depth. Do
not try to dig too deeply in the first pass.
•If the machine jumps or bucks, allow the unit to move forward at a slightly
faster rate.
•If the machine stays and digs in one spot, try rocking the unit from side to
side to start it moving forward again. If the soil is very hard, water a few days
before cultivating. Avoid working the soil when soggy or wet. Wait a day or
two after heavy rain for the ground to dry.
Maintenance
Clean the Machine
Clean the machine thoroughly to remove all dust and debris, after every work session.
•To reduce fire hazards, keep the machine and, in particular, the motor free
of leaves, branches or excessive grease.
•Always clean the machine after use with a damp cloth dipped in neutral
detergent.
•Remove all traces of humidity using a soft damp cloth. Humidity can
generate risks of electric shocks.
•Do not use aggressive detergents or solvents to clean the plastic parts or
handgrips.
•Do not spray water onto the motor and electrical components and prevent
them from getting wet.
•To avoid overheating and damage to the motor or the battery, always keep
the cooling air vents clean and free of debris.
3
cramer.eu
EN
Clearing Tines Of Foreign Objects
During operation, a stone or root could become lodged in the tines, or tall grass or
weeds may become wrapped around the tine shaft. To clear the tines, release the
trigger lever. Unplug the cultivator, and dislodge or remove any obstacles from the
tines or tine shaft. To ease removal of tall grass or weeds that are wrapped around
the tine shaft, remove one or more of the tines from the tine shaft.
Troubleshooting
PROBLEM PROBABLE CAUSE POSSIBLE SOLUTION
Motor fails to
start when
switch trigger is
depressed.
Battery is not
secure.
To secure the battery pack, make
sure the latch on bottom of the
battery pack snaps into place.
Battery is not
charged.
Charge the battery pack according
to the instructions included with
your model.
Motor runs but
tines do not
move.
Stone or root could
become lodged in
the tines.
To clear the tines, release the
trigger lever. Unplug the tiller, and
dislodge or remove any obstacles
from the tines or tine shaft.
Tall grass or weeds
may become
wrapped around the
tine shaft.
To ease removal of tall grass or
weeds that are wrapped around the
tine shaft, remove one or more of
the tines from the tine shaft.
Gear train failure. Take unit to authorized service
center.
Technical Data
PROPERTY VALUE
Blade diameter 225 mm

Specyfikacje produktu

Marka: Cramer
Kategoria: Niesklasyfikowane
Model: A82TXT

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Cramer A82TXT, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje Niesklasyfikowane Cramer

Cramer

Cramer A82TXT Instrukcja

4 Października 2024
Cramer

Cramer 48SK192 Instrukcja

4 Października 2024
Cramer

Cramer A82TXHD Instrukcja

4 Października 2024
Cramer

Cramer A82TXPS Instrukcja

4 Października 2024
Cramer

Cramer 48SK96 Instrukcja

4 Października 2024
Cramer

Cramer A82TXE Instrukcja

4 Października 2024

Instrukcje Niesklasyfikowane

Najnowsze instrukcje dla Niesklasyfikowane

Black Diamond

Black Diamond BD1121530000ALL1 Instrukcja

15 Października 2024
Husqvarna

Husqvarna K 970 SmartGuard Instrukcja

15 Października 2024
Stihl

Stihl HT 70 Instrukcja

15 Października 2024
Ernesto

Ernesto H14270 Instrukcja

15 Października 2024
Uniden

Uniden BT MIC KIT Instrukcja

15 Października 2024
Vaude

Vaude Omnis Bike 26 Instrukcja

15 Października 2024
ART

ART ProChannel II Instrukcja

15 Października 2024
Aukey

Aukey DR02J Instrukcja

15 Października 2024
Master Lock

Master Lock 653EURD Instrukcja

15 Października 2024
Roland

Roland FR-18 Diatonic Instrukcja

15 Października 2024