Instrukcja obsługi Craftsman CMXGVAM1144043

Craftsman Niesklasyfikowane CMXGVAM1144043

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Craftsman CMXGVAM1144043 (20 stron) w kategorii Niesklasyfikowane. Ta instrukcja była pomocna dla 3 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/20
Safe Operation Practices • Assembly & Set-Up • Controls & Operation • Service • Troubleshooting
OperatOrs Manual
Record Product Information
Before setting up and operating your new equipment, please locate the model plate
on the equipment and record the information in the provided area to the right. You
can locate the model plate by standing at the operator’s position and looking down
at the tine shield. This information will be necessary, should you seek technical
support via our web site, Customer Support Department, or with a local authorized
service dealer.
M Nodel uMber
S Nerial uMber
Form No. 769-23190
(August 27, 2019)
WARNING
Read and follow all safety rules and instructions in this manual before attempting to operate this machine. Failure to comply with these instructions
may result in personal injury.
Safe Operation Practices .......................................................... 2
Assembly & Set-Up ................................................................... 4
Controls & Operation ............................................................... 6
Service .................................................................................... 8
Troubleshooting ...................................................................... 9
Español ..................................................................................11
Replacement Parts ..............................See Separate Supplement
Warranty ............................................See Separate Supplement
Table of Contents
NOTE: This Operator’s Manual covers several models. Features may vary by model. Not all features in this manual are applicable to all models and the model depicted may differ from yours.
WARNING
California Proposition 65
Engine Exhaust, some of its constituents and certain vehicle components contain or emit chemicals known to the State of California to cause cancer
and birth defects or other reproductive harm.
Battery posts, terminals and related accessories contain lead and lead compounds, chemicals known to the State of California to cause cancer and
reproductive harm. Wash hands after handling.
Front Tine Tiller
2
SAFE OPERATION PRACTICES
Training
1. Read, understand and follow all instructions on the machine and in the manual(s) before attempting
to assemble and operate. Keep this manual in a safe place for future and regular reference and for
ordering replacement parts.
2. Be familiar with all controls and their proper operation. Know how to stop the machine and disengage
it quickly.
3. Never allow children under 14 years of age to operate this machine. Children 14 and over should read
and understand the instructions and safe operation practices in this manual and on the machine and be
trained and supervised by an adult.
4. Never allow adults to operate this machine without proper instruction.
5. Keep the area of operation clear of all persons, particularly small children and pets. Stop machine if
anyone enters the area.
Preparation
1. Thoroughly inspect the area where the equipment is to be used. Remove all stones, sticks, wire and
other foreign objects which could be tripped over and cause personal injury.
2. Wear sturdy, rough-soled work shoes and close fitting slacks and shirt. Loose fitting clothes or jewelry
can be caught in moving parts. Never operate this machine in bare feet or sandals.
3. Disengage clutch levers and shift (if provided) into neutral (“N”) before starting the engine.
4. Never leave this machine unattended with the engine running.
5. Never attempt to make any adjustments while engine is running, except where specifically
recommended in the operator’s manual.
Safe Handling of Gasoline:
1. To avoid personal injury or property damage use extreme care in handling gasoline. Gasoline is
extremely flammable and the vapors are explosive. Serious personal injury can occur when gasoline is
spilled on yourself or your clothes which can ignite. Wash your skin and change clothes immediately.
Use only an approved gasoline container.
Never fill containers inside a vehicle or on a truck or trailer bed with a plastic liner. Always place
containers on the ground away from your vehicle before filling.
When practical, remove gas-powered equipment from the truck or trailer and refuel it on the
ground. If this is not possible, then refuel such equipment on a trailer with a portable container,
rather than from a gasoline dispenser nozzle.
Keep the nozzle in contact with the rim of the fuel tank or container opening at all times until
fueling is complete. Do not use a nozzle lock-open device.
Extinguish all cigarettes, cigars, pipes and other sources of ignition.
Never fuel machine indoors.
Never remove gas cap or add fuel while the engine is hot or running. Allow engine to cool at
least five minutes before refueling.
Never over fill fuel tank. Fill tank to no more than 1/2 inch below bottom of filler neck to allow
space for fuel expansion.
Replace gasoline cap and tighten securely.
If gasoline is spilled, wipe it off the engine and equipment. Move unit to another area. Wait five
minutes before starting the engine.
To reduce fire hazards, keep machine free of grass, leaves or other debris build-up. Clean up oil
or fuel spillage and remove any fuel soaked debris.
Never store the machine or fuel container inside where there is an open flame, spark or pilot
light as on a water heater, space heater, furnace, clothes dryer or other gas appliances.
Operation
1. Do not put hands or feet near rotating parts. Contact with the rotating parts can amputate hands and feet.
2. Always wear safety glasses or safety goggles during operation and while performing an adjustment or
repair to protect your eyes. Thrown objects which ricochet can cause serious injury to the eyes.
3. For extended use of this product, hearing protection is required.
4. Do not operate machine while under the influence of alcohol or drugs.
5. Never operate this machine without good visibility or light. Always be sure of your footing and keep a
firm hold on the handles.
6. Keep bystanders away from the machine while it is in operation. Stop the machine if anyone enters the
area.
7. Be careful when tilling in hard ground. The tines may catch in the ground and propel the tiller forward.
If this occurs, let go of the handle bars and do not restrain the machine.
8. Exercise extreme caution when operating on or crossing gravel surfaces. Stay alert for hidden hazards
or traffic. Do not carry passengers.
9. Never operate the machine at high transport speeds on hard or slippery surfaces.
10. Exercise caution to avoid slipping or falling.
11. Look down and behind and use care when in reverse or pulling machine towards you.
12. Start the engine according to the instructions found in this manual and keep feet well away from the
tines at all times.
13. After striking a foreign object, stop the engine, disconnect the spark plug wire and ground against
the engine. Thoroughly inspect the machine for any damage. Repair the damage before starting and
operating.
14. Disengage all clutch levers (if fitted) and stop engine before you leave the operating position (behind
the handles). Wait until the tines come to a complete stop before unclogging the tines or making any
adjustments or inspections.
15. Never run an engine indoors or in a poorly ventilated area. Engine exhaust contains carbon monoxide,
an odorless and deadly gas.
16. Muffler and engine become hot and can cause a burn. Do not touch.
17. Use caution when tilling near fences, buildings and underground utilities. Rotating tines can cause
property damage or personal injury.
18. Do not overload machine capacity by attempting to till soil too deep at too fast of a rate.
19. If the machine should start making an unusual noise or vibration, stop the engine, disconnect the spark
plug wire and ground it against the engine. Inspect thoroughly for damage. Repair any damage before
starting and operating.
20. Keep all shields, guards and safety devices in place and operating properly.
21. Never pick up or carry machine while the engine is running.
22. Use only attachments and accessories approved by the manufacturer. Failure to do so can result in
personal injury.
23. If situations occur which are not covered in this manual, use care and good judgement. Contact
Customer Support for assistance and the name of your nearest servicing dealer.
Maintenance & Storage
1. Keep machine, attachments and accessories in safe working order.
2. Allow a machine to cool at least five minutes before storing. Never tamper with safety devices. Check
their proper operation regularly.
3. Check bolts and screws for proper tightness at frequent intervals to keep the machine in safe working
condition. Also, visually inspect machine for any damage.
4. Before cleaning, repairing or inspecting, stop the engine and make certain the tines and all moving
parts have stopped. Disconnect the spark plug wire and ground it against the engine to prevent
unintended starting.
5. Do not change the engine governor settings or over-speed the engine. The governor controls the
maximum safe operating speed of engine.
6. Maintain or replace safety and instruction labels, as necessary.
7. Follow this manual for safe loading, unloading, transporting and storage of this machine.
8. Always refer to the Operator’s Manual for important details if the machine is to be stored for an
extended period.
9. If the fuel tank has to be drained, do this outdoors.
10. Observe proper disposal laws and regulations for gas, oil, etc. to protect the environment.
11. According to the Consumer Products Safety Commission (CPSC) and the U.S. Environmental Protection
Agency (EPA), this product has an of seven (7) years, or 130 hours of operation. At the Average Useful Life
end of the have the machine inspected annually by an authorized service dealer to Average Useful Life
ensure that all mechanical and safety systems are working properly and not worn excessively. Failure to
do so can result in accidents, injuries or death.
WARNING
This symbol points out important safety instructions which, if not followed, could endanger the personal safety and/or property of yourself and others. Read and
follow all instructions in this manual before attempting to operate this machine. Failure to comply with these instructions may result in personal injury. When you see
this symbol - HEED ITS WARNING!
DANGER
This machine was built to be operated according to the safe operation practices in this manual. As with any type of power equipment, carelessness or error on the part of
the operator can result in serious injury. This machine is capable of amputating hands and feet and throwing debris. Failure to observe the following safety instructions
could result in serious injury or death.
3
SAFE OPERATION PRACTICES
Notice Regarding Emissions
Engines which are certified to comply with California and federal EPA emission regulations for SORE (Small Off
Road Equipment) are certified to operate on regular unleaded gasoline, and may include the following emission
control systems: Engine Modification (EM), Oxidizing Catalyst (OC), Secondary Air Injection (SAI) and Three Way
Catalyst (TWC) if so equipped.
Spark Arrestor
WARNING
This machine is equipped with an internal combustion engine and should
not be used on or near any unimproved forest-covered, brushcovered or
grass-covered land unless the engine’s exhaust system is equipped with a
spark arrestor meeting applicable local or state laws (if any).
If a spark arrestor is used, it should be maintained in effective working order by the operator. In the State of
California the above is required by law (Section 4442 of the California Public Resources Code). Other states may
have similar laws. Federal laws apply on federal lands.
A spark arrestor for the muffler is available through your nearest engine authorized service dealer or contact the
service department, P.O. Box 361131 Cleveland, Ohio 44136-0019.
WARNING
Your Responsibility Restrict the use of this power machine to persons who read, understand and follow the warnings and instructions in this manual and on the machine.
SAVE THESE INSTRUCTIONS!
Safety Symbols
This page depicts and describes safety symbols that may appear on this product. Read, understand and follow all instructions on the machine before attempting to assemble and operate.
Symbol Description
READ THE OPERATOR’S MANUAL(S)
Read, understand and follow all instructions in the manual(s) before attempting to assemble and operate.
WARNING— ROTATING TINES
Do not put hands or feet near rotating parts. Contact with the rotating parts can amputate hands and feet.


Specyfikacje produktu

Marka: Craftsman
Kategoria: Niesklasyfikowane
Model: CMXGVAM1144043

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Craftsman CMXGVAM1144043, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje Niesklasyfikowane Craftsman

Instrukcje Niesklasyfikowane

Najnowsze instrukcje dla Niesklasyfikowane

Stihl

Stihl HT 70 Instrukcja

15 Października 2024
Ernesto

Ernesto H14270 Instrukcja

15 Października 2024
Uniden

Uniden BT MIC KIT Instrukcja

15 Października 2024
Vaude

Vaude Omnis Bike 26 Instrukcja

15 Października 2024
ART

ART ProChannel II Instrukcja

15 Października 2024
Aukey

Aukey DR02J Instrukcja

15 Października 2024
Master Lock

Master Lock 653EURD Instrukcja

15 Października 2024
Roland

Roland FR-18 Diatonic Instrukcja

15 Października 2024