Instrukcja obsługi Chord SPM 5000 MkII

Chord Receiver SPM 5000 MkII

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Chord SPM 5000 MkII (5 stron) w kategorii Receiver. Ta instrukcja była pomocna dla 6 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/5
SPM 5000 MK II
POWER AMPLIFIER MANUAL
Chord Electronics Limited
Made in England by:
Chord Electronics Limited, The Pump House, Farleigh Bridge, Farleigh Lane, East Farleigh, Kent.
ME16 9NB. United Kingdom.
Tel: 44(0)1622-721444 Fax: 44(0)1622-721555
OPERATING INSTRUCTIONS
INSTALLATION
Your amplier should be positioned to ensure a free flow of air over the rear heat sink and through
the upper and lower grilles. When driven continuously at well above average listening levels, the
temperature on the heat sink may exceed 50
oC. This is not a fault, but an indication of the need for
adequate ventilation.
Please ensure that the IEC mains lead is correctly terminated.
UK/EUROPE Brown = LIVE = Black USA/CANADA
Blue = NEUTRAL = White
Yellow/Green = EARTH = Green
THE SPM 5000 MUST BE EARTHED AT ALL TIMES VIA ITS OWN MAINS LEAD.
FAILURE TO DO THIS MAY BE HAZARDOUS.
CE This unit complies with EN 50081-1 & IEC 801/2
It has come to light that, in some European
countries a hum may occur if Pre and Power
Ampliers are connected to mains wall sockets
which do not have an earth. Please ensure
that, if this is the case, the pre and power
amps are connected via a multi-way mains
block which contains an earth point at each
socket outlet. This is to ensure that the chassis
metalwork of each item is connected together
and Chord Electronics Limited firmly
recommend that an earthing method for the
building is implemented.
Chord Electronics Limited
Made in England by:
Chord Electronics Limited, The Pump House, Farleigh Bridge, Farleigh Lane, East Farleigh, Kent.
ME16 9NB. United Kingdom.
Tel: 44(0)1622-721444 Fax: 44(0)1622-721555
REAR PANEL
The two female XLRs are pre-amplier inputs. Also, phono input sockets are available immediately
outboard of the IEC mains plug. Please connect these last, with the amplier switched o.

Specyfikacje produktu

Marka: Chord
Kategoria: Receiver
Model: SPM 5000 MkII

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Chord SPM 5000 MkII, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje Receiver Chord

Chord

Chord Anni Instrukcja

14 Października 2024
Chord

Chord 2yu Instrukcja

2 Września 2024
Chord

Chord Dave Instrukcja

27 Sierpnia 2024
Chord

Chord Mezzo 75 Instrukcja

18 Sierpnia 2024
Chord

Chord Qutest Instrukcja

16 Sierpnia 2024
Chord

Chord Ultima 2 Instrukcja

9 Sierpnia 2024
Chord

Chord Dual Instrukcja

5 Lipca 2024

Instrukcje Receiver

Najnowsze instrukcje dla Receiver

Apart

Apart SBR160 Instrukcja

14 Października 2024
American Audio

American Audio VLP 600 Instrukcja

14 Października 2024
Sennheiser

Sennheiser EM 9046 SU Instrukcja

14 Października 2024
Yamaha

Yamaha MusicCast RX-V481 Instrukcja

13 Października 2024
JL Audio

JL Audio VX600/6i Instrukcja

12 Października 2024
Pioneer

Pioneer SX-303RDS Instrukcja

10 Października 2024
Denon

Denon AVR-991 Instrukcja

10 Października 2024
Denon

Denon AVR-4810 Instrukcja

10 Października 2024
Avantree

Avantree Audiplex Instrukcja

9 Października 2024
Avantree

Avantree Oasis Plus Instrukcja

9 Października 2024