Instrukcja obsługi Chord Étude

Chord odbiornik Étude

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Chord Étude (3 stron) w kategorii odbiornik. Ta instrukcja była pomocna dla 12 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/3
Connecting speakers to Étude 4.0
The binding posts on Étude are designed to accommodate bare wire,
spade connectors and banana plugs.
Banana plugs: can be inserted into the middle of the binding posts,
as shown below, to achieve a reliable connection. Align a banana
plug with the binding post and push the connector confidently until
it stops. You must pay attention to the polarity, making sure that a
positive connection on Étude matches the positive connection on the
wire and speaker. You must also pay careful attention to the left and
right channels.
Chord Electronics
Étude | Quickstart Manual
The Pumphouse, Farleigh Lane, East Farleigh, Kent, ME16 9NB, United Kingdom
info@chordelectronics.co.uk
chordelectronics.co.uk
Quickstart Manual
Introduction 1.0
Welcome to the Étude Quickstart Guide. This shortened guide is
supplementary to the main manual which should be referred to for full
safety and operational information.
Please note, more information on any of these topics is listed within the
full manual found under the product page:
chordelectronics.co.uk/product/etude
Warranty 1.1
The Étude comes with a comprehensive 5-year warranty. To activate
this warranty, please register your device via the Chord Electronics
website:
chordelectronics.co.uk/register-product
Connecting Étude to a preamp 3.0
First, ensure that Étude, is turned o. Ensuring your pre amplifier is
turned o and the volume is set to minimum, connect the XLR or RCA
audio outputs from the partnering preamp to the Étude corresponding
XLR or RCA inputs, paying careful attention to the left and right
channels.
Input Input
Although Étude is compact, it features a highly advanced Class
A/B sliding bias design which generates heat. Please ensure there is
sucient ventilation around Étude at all times. Avoid placing Étude
in enclosed spaces, on soft surfaces, near sources of heat and never
cover its ventilation holes. For optimum operation and ventilation use
an Ensemble stand.
Placement 2.0
Chord Electronics
Étude | Quickstart Manual
The Pumphouse, Farleigh Lane, East Farleigh, Kent, ME16 9NB, United Kingdom
info@chordelectronics.co.uk
chordelectronics.co.uk
Quickstart Manual
Now that you have successfully completed the setup of your Étude
you can immediately begin to experience its transformational quality
on your music collection. However, we advise that you register your
product with us. Registering helps us give you the best possible
support and protects your investment:
Product registration 7.0
chordelectronics.co.uk/register-product/
Powering up Étude 6.0
With all devices correctly connected, the system is ready for playback.
With normal playback ensure both toggle switches should remain in
the same ‘down’ position. Again, ensure any volume controls are set to
the minimum before switching on your source and pre-amplifier, and
then finally Étude. This sequence should always be followed to protect
connected devices. Commence playback before slowly increasing the
volume to a comfortable listening level.
Once all audio inputs and outputs are connected, connect the power
cable to Étude.
Connecting the power to Étude 5.0
: unscrew Étude’s binding posts, rotating
counter-clockwise until there is sucient room to attach the spade
connector and then re-tighten. For bare wire, continue to unscrew until
the post is exposed. Insert the wire adjacent to the post and beneath
the connector and re-tighten (finger-tight) ensuring there are no stray
wires.
or


Specyfikacje produktu

Marka: Chord
Kategoria: odbiornik
Model: Étude

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Chord Étude, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje odbiornik Chord

Chord

Chord Anni Instrukcja

14 Października 2024
Chord

Chord CB-15BT Instrukcja

29 Września 2024
Chord

Chord CA-15BT Instrukcja

29 Września 2024
Chord

Chord CG-10BT Instrukcja

29 Września 2024
Chord

Chord CPA 5000 Instrukcja

12 Września 2024
Chord

Chord 2yu Instrukcja

2 Września 2024
Chord

Chord Dave Instrukcja

27 Sierpnia 2024
Chord

Chord Mezzo 75 Instrukcja

18 Sierpnia 2024

Instrukcje odbiornik

Najnowsze instrukcje dla odbiornik

Denon

Denon AVR-S900W Instrukcja

15 Października 2024
Pro-Ject

Pro-Ject Amp Box DS2 Instrukcja

15 Października 2024
AKG

AKG HP12U Instrukcja

15 Października 2024
Apart

Apart SBR160 Instrukcja

14 Października 2024
American Audio

American Audio VLP 600 Instrukcja

14 Października 2024
Sennheiser

Sennheiser EM 9046 SU Instrukcja

14 Października 2024
Yamaha

Yamaha MusicCast RX-V481 Instrukcja

13 Października 2024
JL Audio

JL Audio VX600/6i Instrukcja

12 Października 2024
Pioneer

Pioneer SX-303RDS Instrukcja

10 Października 2024
Denon

Denon AVR-991 Instrukcja

10 Października 2024