Instrukcja obsługi Cellular Line ACHT28CL

Cellular Line Ładowarka do urządzenia mobilnego ACHT28CL

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Cellular Line ACHT28CL (4 stron) w kategorii Ładowarka do urządzenia mobilnego. Ta instrukcja była pomocna dla 5 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/4
Quick Setup Guide
JBL OnBeat™
VenUe
WeLcOme
Thank you for purchasing the JBL OnBeat
™ Venue iPad dock. This quick setup guide will
show you how to connect and set up your dock. To download the free JBL Musicflow App
for your portable device, please go to the Apple App Store.
cOnnectIOnS
1. If you are going to use your OnBeat Venue with another audio source, plug one end of
a 3.5mm (1/8”) stereo cable (not supplied) into the OnBeat Venue’s Aux In connector,
and plug the other end into the audio source’s audio out or headphone out connector.
2. If you are going to use your
OnBeat Venue with a video
display, use a component video
cable (not supplied) to connect
the OnBeat Venue’s Component
Video Out jacks to the video
display’s component video
inputs. When you play audio/
video content on the device
the video will appear on the
connected display.
3. Plug the OnBeat Venue’s power
supply into the Power connector
on the unit and into a working
AC power outlet. The OnBeat
Venue will automatically turn
on and go into the Bluetooth
pairing mode (the Bluetooth
LED will be flashing blue). Power
Connector
Aux
Input
Component
Video Out
2
PLACEMENT
Place OnBeat Venue on a shelf or table with the rear of its enclosure is at least 3" (76mm)
away from a wall or other surface to allow the bass ports to operate properly.
CONTROLS AND INDICATORS
Bass Boost
Button
Movie
Button
Aux Input
LED
Bluetooth
LED
Volume Up/Down
Buttons
Docking Slide (open)
Docking Connector
Power
Button
Dock Input
LED
Source
Button
Bass Boost button: Press this button to enhance the bass performance. The button’s
LED will illuminate when Bass Boost is on.
Movie button: Press this button to activate the Movie EQ mode, which creates an
extra-wide sound field to compliment films and other video media. The button’s LED will
illuminate when the Movie mode is on.
• If the JBL MusicFlow app is active in a docked device, pressing the Movie button will
cycle between the Movie EQ mode and whatever EQ mode has been selected in the
MusicFlow app. The Movie button’s LED will illuminate when the Movie mode is on and
will turn off when the EQ mode selected in the app is on. (If Movie is the EQ mode
selected in the MusicFlow app, pressing the Movie button has no effect.)
Source button: Press this button to cycle through the audio sources: , iPod/Bluetooth
iPhone/iPad dock and Aux Input. The input LED for the active source will illuminate.
• If you begin to stream audio from a paired Bluetooth device or play audio from a
device connected to the dock while another source is playing, the OnBeat Venue will
automatically switch to the new source.
Aux Input LED: This LED illuminates when the Aux Input is the active source.
Dock Input LED: This LED illuminates when the iPod/iPhone/iPad dock is the active
source.
Bluetooth LED: This LED flashes blue when the OnBeat Venue is in the pairing Bluetooth
mode, and turns solid blue when it has successfully paired with a device.Bluetooth
3
www.jbl.com
Power button: When the OnBeat Venue is on, press the Power button to put it into the
standby mode. The button’s LED will illuminate solid amber when the unit is in standby.
When the OnBeat Venue is in standby, press the Power button to turn it on. The button’s
LED will illuminate solid white when the unit is on.
When the OnBeat Venue is in the standby mode it will automatically turn on when it detects
audio playing from a -connected device or from a docked device.Bluetooth
When the OnBeat Venue is on, it will automatically enter the standby mode after 10 minutes
of inactivity (no audio input and no user-control operation).
Note: When the OnBeat Venue enters the standby mode it will also bring a docked device
into standby mode.
Volume Up/Down buttons: Press these buttons to raise and lower the OnBeat Venue’s
volume. To mute the sound, press both buttons at the same time. (The Power button LED
will flash white when the sound is muted.) To restore the sound press both Volume buttons
together.
Docking slide: Press in on the JBL logo to open the docking slide and pull the slide all
the way open.
Docking connector: Place your device onto the docking slide so that it is firmly seated
on the docking connector.
Note: We recommend that you disable the”Shake to Shuffle” feature on your iPod nano,
iPod touch and iPhone before docking the device on the OnBeat Venue.
BLUETOOTH WIReLeSS StReamInG
To wirelessly stream audio to the OnBeat Venue from a -enabled device: Bluetooth
1. If the OnBeat Venue’s LED is not flashing blue, press the Source button until Bluetooth
the Bluetooth LED begins flashing blue.
2. Place the -capable device in the pairing mode. Use the device’s Bluetooth Bluetooth
pairing menu to pair with OnBeat Venue. (If the device requires a pairing code, use
0000.)
3. When OnBeat Venue’s LED illuminates blue continually, it is paired with the Bluetooth
device and you can stream audio via from the device to the OnBeat Venue.Bluetooth
To disconnect the device, press and hold the Source button. To pair OnBeat Bluetooth
Venue with a different -enabled device, repeat Steps 2 and 3 with the new device.Bluetooth

Specyfikacje produktu

Marka: Cellular Line
Kategoria: Ładowarka do urządzenia mobilnego
Model: ACHT28CL

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Cellular Line ACHT28CL, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje Ładowarka do urządzenia mobilnego Cellular Line

Cellular Line

Cellular Line ACHARV3 Instrukcja

17 Września 2024
Cellular Line

Cellular Line CBRARLGKG800 Instrukcja

15 Września 2024
Cellular Line

Cellular Line ACHT28CL Instrukcja

31 Sierpnia 2024
Cellular Line

Cellular Line ACHIPHONECL Instrukcja

21 Sierpnia 2024
Cellular Line

Cellular Line ACHARLGW7000 Instrukcja

13 Sierpnia 2024

Instrukcje Ładowarka do urządzenia mobilnego

Najnowsze instrukcje dla Ładowarka do urządzenia mobilnego

Anker

Anker PowerCore+ 20100 USB-C Instrukcja

15 Października 2024
Bauhn

Bauhn ACRWC-0424-M Instrukcja

15 Października 2024
Bauhn

Bauhn AFTC3-0424-W Instrukcja

15 Października 2024
Bauhn

Bauhn AFTC3-0424-B Instrukcja

15 Października 2024
Bauhn

Bauhn ACRWC-0424-W Instrukcja

15 Października 2024
Bauhn

Bauhn ADMWC-0224 Instrukcja

15 Października 2024
Black Box

Black Box Deluxe UCCSM-10-30TP-HASP Instrukcja

13 Października 2024
Black Box

Black Box Deluxe UCCSL-12-36HP Instrukcja

10 Października 2024
Ikea

Ikea LILLHULT 505.284.95 Instrukcja

9 Października 2024
Ikea

Ikea LILLHULT 105.284.97 Instrukcja

9 Października 2024