Instrukcja obsługi Celestron Granite 10x42

Celestron lorneta Granite 10x42

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Celestron Granite 10x42 (12 stron) w kategorii lorneta. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/12

C Gelestron ranite™ BinoCulars

J G Cumelles ranite eslestron

B G CinoCulares ranite de elestron

C G -F elestron ranite ernGlas

B C G inoColi elestron ranite

Thank you for purchasing Celestron binoculars.

We hope they bring you many years of enjoyment.

To maximize the use of your new binoculars,

please read these instructions on use and care

before using them.

Adjusting the interpupillAry distAnce (ipd)

Adjusting Focus

Since the distance between the eyes (speciﬁcally,

the distance between the centers of the pupils)

varies among individuals, the two eyepieces of the

binoculars must be correctly aligned (adjusted).

This is called adjusting the interpupillary distance.

To adjust this distance, lift the binoculars up to your

eyes (using both hands) and look through them at

an object in the distance. Move the two halves of

the binoculars about the hinge until you see one

clear circle of image through both eyes.

Since most people have a variance of vision from

their left eye to their right eye, you must adjust the

focusing system. Use the following steps to achieve

focus: (1) Close your right eye and look through the

left side of the binoculars with your left eye at the

subject matter. Rotate the center focusing wheel

until the image appears in sharp focus; (2) Close

your left eye and look through the right eyepiece

(called the diopter). Rotate the right eyepiece until

the image appears in sharp focus. (3) Now look

through both eyepieces with both eyes open. Since

you’ve already adjusted the right eyepiece, use

only the center focusing wheel to refocus on a new

object at a different distance.

Note: Your binocular has a diopter indicator,

please note the setting for later use for faster

focus adjustment.

Hint: Eyeglasses worn for nearsightedness

should be worn when using binoculars, as

you may not be able to reach a sharp focus at

inﬁnity without them.

ENGLISH

Eyecup

Diopter

Adjustment

Tripod Adapter Threads -

42mm Models (under cap)

Objective Lens

Eyepiece

Focus Wheel

Roof

Binocular

IPD

C G Belestron ranite inoCulars

set the twist up rubber eyecups

Twist the Rubber Eyecups up if you do not wear

eyeglasses and fold them down if you do wear

eyeglasses to obtain the maximum ﬁeld of view.

Now you are ready to use your binoculars —

enjoy the view!

tripod AdAptAbility

The binoculars feature a built-in tripod adapter

ﬁtting which is a threaded screw hole underneath a

cap. To attach a binocular tripod adapter, remove

the cap and then thread the screw from the

binocular tripod adapter into the threaded screw

hold. The other end of the binocular tripod adapter

attaches to a photographic tripod. Mounting

binoculars this way allows for added stability and

comfort.

cAre And cleAning

Binoculars do not need routine maintenance

other than making sure that the objective

lenses and eyepieces are kept clean. If repairs

become necessary, they should be serviced by

the manufacturer or a qualiﬁed binocular repair

company. Collimation (optical alignment) is the

biggest concern with binoculars. If your binoculars

are roughly handled or dropped, there is a good

chance that the collimation will be out, and

they should be serviced. Dirty objectives and/or

eyepieces mean less light transmission and loss of

brightness as well as unsharp images. Keep your

optics clean! When not using your binoculars, store

them in the case provided. Avoid touching the glass

surfaces, however, if ﬁngerprints (which contain mild

acid) do get on the glass, they should be cleaned as

soon as possible to avoid damaging the coatings.

To clean the optical surfaces, we recommend a

lens/optics cleaning kit available at most photo or

optical shops. Follow the instructions provided with

the kit closely for best results. If you have a lot of

dust or dirt accumulated, brush it off gently with a

camel’s hair brush and/or utilize a can of pressurized

air before using the cleaning kit. Alternately, you

could use the Celestron LensPen (#93575) made

especially for cleaning binoculars. attempt Never

to clean your binoculars internally or try to take

them apart!

cAution!

Viewing the Sun may cause permanent eye

damage. Do not view the Sun with your binoculars

or even with the naked eye.

problems or repAir

If warranty problems arise or repairs are necessary,

contact the Celestron customer service department

if you live in the U.S.A. or Canada. If you live

elsewhere, please contact the Celestron dealer you

purchased the binoculars from or the Celestron

distributor in your country (listings are available

at www.celestron.com).

wArrAnty

Your binocular has the Celestron No Fault Limited

Lifetime Warranty for U.S.A. and Canadian

customers. For complete details of eligibility and

for warranty information on customers in other

countries visit the Celestron website.

Celestron binoculars are designed and intended for

those 13 years of age and older.

F or Complete speCiFiCations and produCt inFormation ,

visit www Celestron Com: . .

2835 Columbia Street • Torrance, CA 90503 U.S.A

Tel: 310.328.9560 • Fax: 310.212.5835

All rights resevered. • Printed in China • 01-12

Specyfikacje produktu

Marka:	Celestron
Kategoria:	lorneta
Model:	Granite 10x42
Kolor produktu:	Czarny
Waga produktu:	680.39 g
Wodoodporny:	Tak
Jasność:	18 cd/m²
Walizka:	Tak
Najmniejsza odległość ogniskowa:	2.5 m
Powiekszenie:	10 x
Wsparcie oczu:	15 mm
Wsparcie dla montażu na tripodzie:	Tak
Źrenica wyjściowa:	4.2 mm
Średnica obiektywna:	42 mm
Pole widzenia (przy 1000 m):	- m
Rodzaj pryzmatu:	BaK-4