Instrukcja obsługi Casio DQ-981
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Casio DQ-981 (3 stron) w kategorii zegar. Ta instrukcja była pomocna dla 7 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek
Strona 1/3
Operation Guide DQ-981
1
MA1507-EA © 2015 CASIO COMPUTER CO., LTD.
1
2
73 4
5
6
A sticker is affi xed to the glass of the clock when you purchase it. Be sure to remove the sticker before using
the clock.
Depending on the clock model, the confi guration of your clock may differ somewhat from that shown in the
illustration.
Alarm Off
PM indicator
DATE (month - date)
Day of the week
Current time
(Hour, minutes, seconds)
Current Humidity
Current Temperature
Snooze Alarm On
Alarm time
Snooze on indicator
Alarm on indicator
GENERAL GUIDE
1
Alarm Mode selector
SNZ: Snooze alarm on
ON: Alarm on
OFF: Alarm off
2
DEMO button
Press this button to test the alarm sound.
3
°C/°F button
Press this button to toggle the temperature units between Celsius and Fahrenheit.
4
SET button
Use this button when setting the current time.
5
RESET button
Press this button to reset the clock after replacing its batteries.
6
SNOOZE/LIGHT button
Press this button to illuminate the display for about fi ve seconds.
Pressing this button while the alarm is sounding stops the alarm.
7
+ (UP) / – (DOWN) buttons
Use these buttons to change the alarm time or the setting that is fl ashing on the display.
Operation Guide DQ-981
2
USING THE CLOCK
1. Press the SET button (
4
) to cycle through the setting screens as shown below.
Normal Timekeeping Screen Year Setting Screen
Contrast Setting Screen Month and Day Setting Screen
12-hour/24-hour Setting Screen Time Setting Screen
2. While the screen you want is displayed, use the – (DOWN) and + (UP) buttons (
7
) to change the fl ashing
digits.
Press – (DOWN) to decrease the fl ashing
digits.
Press + (UP) to increase the fl ashing
digits.
Holding down + (UP) or – (DOWN) changes the fl ashing digits at high speed.
You can set the year in the range of 2000 to 2099. The day of the week is set automatically in accordance
with the date setting.
Pressing + (UP) or – (DOWN) while the Time Setting Screen is on the display causes the seconds count to be
reset to 00.
Each press of + (UP) or – (DOWN) while the 12-hour/24-hour Setting Screen is on the display toggles between
12-hour and 24-hour timekeeping.
You can set the contrast level in the range of 1 to 10.
3. After making the settings you want, use the SET button (
4
) to display the Normal Timekeeping Screen.
The clock automatically returns to the Normal Timekeeping Screen if you leave a setting screen on the display
for about three minutes without performing any operation.
USING THE ALARM
The alarm sounds when the alarm time you set is reached. You can also use the Alarm Mode selector (
1
) to
select the snooze alarm feature.
Setting the Alarm Time
Use the – (DOWN) and + (UP) buttons (
7
) to set the alarm time.
Pressing the – (DOWN) and + (UP) buttons (
7
) causes the alarm time to appear in place of the date on the
display.
Press to change the alarm time setting (–). Press to change the alarm time setting (+).
Holding down + (UP) or – (DOWN) changes the digits at high speed.
Turning the Alarm On and Off
Use the Alarm Mode selector (
1
) to turn the alarm on and off, and to select the snooze feature.
Alarm Mode selector Description
SNOOZE
( )
The alarm sounds at the preset time for one minute, and seven more times every
fi ve minutes thereafter. Even if you stop the alarm by pressing the SNOOZE/
LIGHT button (
6
), the alarm sounds again about fi ve minutes later.
The indicator fl ashes on the display to indicate that the snooze feature is
activated.
ON
( ) The alarm sounds at the preset time for one minute.
OFF The alarm does not sound.
The alarm time appears in place of the date on the display whenever the Alarm Mode selector (
1
) is set to ON
or SNZ.
The alarm sound changes over fi ve levels as it sounds.
Stopping the Alarm
When alarm is sounding, press the SNOOZE/LIGHT button (
6
) to stop it. When the snooze feature is turned
on, the alarm will sound again in about fi ve minutes.
To turn off the snooze feature, slide the Alarm Mode selector (
1
) to OFF.
Operation Guide DQ-981
3
USING THE LIGHT
Pressing the SNOOZE/LIGHT button (
6
) turns on the light and illuminates the display for easy reading in the
dark.
Important!
Overuse of the light can shorten battery life.
THERMOMETER AND HYGROMETER FUNCTIONS
A built-in sensor measures temperature and humidity, and shows the measured value on the display.
The readout from the temperature sensor can also be switched between Celsius (°C) and Fahrenheit (°F).
Temperature Measurements
The temperature display shows “LO” for temperatures below –19.9°C (–3.8°F) and “HI” for temperatures above
49.9°C (121.8°F).
Though temperature readings are displayed up to 0°C (32°F) and greater than 41°C (105°F), note that such
readings are actually outside the guaranteed temperature range of this clock.
Switching between Celsius and Fahrenheit
Push the °C/°F button (
3
) to select either Celsius (°C) or Fahrenheit (°F).
Celsius (°C) Fahrenheit (°F)
°C °F
°C/°F button (
3
)
Humidity Measurements
The humidity display shows “LO” for humidity below 10% and “HI” for humidity above 90%.
Whenever the current temperature is outside the range of 0°C to 49.9°C, the humidity display will show “– –”.
BATTERY REPLACEMENT
Replace batteries whenever the display of the clock becomes dim and diffi cult to read.
1. Open the battery compartment cover as shown in the illustration.
2. Remove all of the old batteries.
3. Load a full set of new batteries. Make sure that their positive (+) and negative (–) ends face in the correct
directions. If you load batteries incorrectly, they can burst and damage the clock.
4. Press the RESET button (
5
). Be sure to press the RESET button (
5
) after replacing batteries.
5. Replace the battery compartment cover.
Battery precautions
Keep batteries out of the reach of small children. If a battery is accidentally swallowed, contact your physician
immediately.
Be sure to load the batteries with their positive (+) and negative (–) ends facing correctly.
Never mix old and new batteries, or batteries of different brands.
Never charge the batteries.
Should batteries ever leak while in the clock, wipe out the fl uid with a cloth, taking care not to let any get onto
your skin.
Replace the batteries at least once a year, even if the current batteries are working properly.
SPECIFICATIONS
Accuracy at Normal Temperature: ±60 seconds a month
Calendar System: Auto-calendar pre-programmed from the year 2000 to 2099
Alarm: Daily Alarm, Snooze Alarm (7 repeats)
Thermometer Functions: Measuring range: –19.9°C to 49.9°C (–3.8°F to 121.8°F)
Though temperature readings are displayed up to 0°C (32°F) and greater than 41°C (105°F), note that such
readings are actually outside the guaranteed temperature range of this clock.
Celsius (°C)/Fahrenheit (°F) switching
Temperature Sensor Precision: ±2°C (±4°F) in range of 0°C to 40°C (32°F to 104°F)
Hygrometer Function: Measuring range: 10% to 90%, when temperature is 0°C to 40°C (32°F to 104°F)
Humidity Sensor Precision: ±10%, when temperature is 5°C to 40°C (41°F to 104°F)
Other: LED light; 12/24-hour timekeeping
Battery: Two AA size batteries (Type: R6P)
Battery Life: Approximately 1 year
1 minute alarm operation per day
5 seconds light operation per day
Operating Temperature: 0°C to 40°C (32°F to 104°F)
Specyfikacje produktu
Marka: | Casio |
Kategoria: | zegar |
Model: | DQ-981 |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z Casio DQ-981, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje zegar Casio
3 Lipca 2024
3 Lipca 2024
3 Lipca 2024
3 Lipca 2024
28 Czerwca 2024
Instrukcje zegar
- zegar Ikea
- zegar Braun
- zegar Lenovo
- zegar Livoo
- zegar Geemarc
- zegar Panasonic
- zegar Muse
- zegar Nedis
- zegar Marquant
- zegar Citizen
- zegar ECG
- zegar Krontaler
- zegar TFA
- zegar Auriol
- zegar Techno Line
- zegar Seiko
- zegar La Crosse Technology
- zegar Velleman
- zegar ART
- zegar Lorus
- zegar Invicta
- zegar Tronic
- zegar Oregon Scientific
- zegar Elro
- zegar Hama
- zegar Taylor
- zegar Hager
- zegar Trevi
- zegar Eurochron
- zegar Alecto
- zegar Zenith
- zegar ADE
- zegar Vitek
- zegar Fysic
- zegar Amplicom
- zegar Ascot
- zegar Ecom
- zegar United Office
- zegar Karlsson
- zegar Cresta
- zegar GlobalTronics
- zegar Jacob Jensen
- zegar Dugena
- zegar AcuRite
- zegar Fisher Price
- zegar Technoline
- zegar Audiovox
- zegar Davis
- zegar Balance Time
- zegar Valcom
- zegar Chacon
- zegar Zuiver
- zegar Irox
- zegar Konig
- zegar Glunz
- zegar Dexford
- zegar Ranex
- zegar IHome
- zegar BBrain
- zegar La Crosse
- zegar Sempre
- zegar Digi-tech
- zegar Global Tronics
- zegar ASA
- zegar TFA Dostmann
- zegar Kogan
- zegar Antelope Audio
- zegar Equity
- zegar Mebus
- zegar DB Technologies
- zegar Focus Electrics
- zegar Pyramid
- zegar Gingko
- zegar Weinberger
- zegar CyberData Systems
- zegar Electronics International
- zegar Antelope
Najnowsze instrukcje dla zegar
11 Października 2024
9 Października 2024
8 Października 2024
8 Października 2024
8 Października 2024
8 Października 2024
8 Października 2024
8 Października 2024
8 Października 2024
8 Października 2024