Instrukcja obsługi Camille Bauer Sineax V604s

Camille Bauer odbiornik Sineax V604s

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Camille Bauer Sineax V604s (24 stron) w kategorii odbiornik. Ta instrukcja była pomocna dla 15 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/24
V604s Be Version 04 12.12
Operating instructions
SINEAX V604s
Programmable multifunctional
transmitter
Camille Bauer AG
Aargauerstrasse 7
CH-5610 Wohlen/Switzerland
Phone +41 56 618 21 11
Fax +41 56 618 21 21
info@camillebauer.com
www.camillebauer.com
2 Operating instructions V604s Be Camille Bauer
Operating instructions
Programmable multifunctional transmitter SINEAX V604s
First read, then …
The unobjectionable and safe operation pre-
supposes that these operating instructions
have been read and understood!
Devices may only be disposed of in a pro-
fessional manner!
Contents
1. Functional description ................................................. 2
2. Connection to a PC and communication via
CB-Manager ................................................................ 2
3. Block diagram .............................................................. 3
4. Technical data .............................................................. 4
5. Signal fl ow ................................................................... 8
6. Modbus interface ....................................................... 12
6.1 EIA-RS-485 Standard ......................................... 12
6.2 Coding and addressing ......................................12
6.3 Mapping .............................................................13
6.4 Device identifi cation ...........................................13
6.5 Measured values ................................................ 14
6.6 Confi guration parameters ..................................15
7. Electric connections .................................................. 22
8. Dimensional drawing ................................................. 24
9. Accessories ...............................................................24
10. Conformity declaration .............................................. 24
1. Functional description
V604s is a multifunctional transmitter for top-hat rail assem-
bly with the following main characteristics:
Measurement of DC voltage, DC current, temperature
(RTD, TC) and resistance
Sensor connection without any external jumpers
2 inputs (e.g. for sensor redundancy or difference
formation)
2 outputs (U and/or I)
DC-energy meter - function (with S0 output)
2 inputs can be linked with each other and allocated
to the 2 outputs which enables calculations and
sensor monitoring (e.g. prognostic maintenance of
sensors)
System capability: Communication via Modbus
interface
Freely programmable relay, e.g. for limit or alarm sig-
nalling
Digital output (optional)
AC/DC wide-range power supply unit
Pluggable high-quality screw or spring cage terminals
All settings of the instrument can be adapted to the measur-
ing task by PC software. The software also serves visualising,
commissioning and service.
2. Connection of SINEAX V604s to a PC and communication via CB-Manager.
V604s communicates with a PC (CB-Manager) via an RS
232/RS485 interface and a MODBUS protocol.
Select the following settings in this respect:
Select the RS 232/ RS485 interface under Options / Inter-
face.
This is also applicable if an RS485/USB converter is used
and the converter is connected to the computer via the
USB connection.
Subsequently, enter the following settings under Options /
Interface / Settings:
Camille Bauer Operating instructions V604s Be 3
D
A
D
3.7 kV
A
3.7 kV3.7 kV
Inputs
Power supply
Contact
A1+
A–
A2+
Bus
0.5 kV
2.3 kV
+
Tx
Rx –
GND
Analog-
outputs
μP
3. Block diagram
To determine which COM port has been allocated to
the RS485 converter (if required), please proceed as
follows:
The COM port of an external RS232 or RS485 converter
may be determined (and, if required, changed) via the
Windows system control.
Example for Windows XP: System control => System
This example shows the COM ports of a PCMCIA card
and a USB-RS232 converter:
- Silicom Serial Card: COM1
- USB-RS232 adapter: COM4
The existing COM ports are determined as the communi-
cation interface when starting the program and selecting
RS232/RS485. Only COM ports found are available for
selection.
Limiting the range of possible device addresses speeds
up the search of connected devices considerably.
Example: If only 2 devices are connected, it makes sense
to select the address range from 1 to 2.
All settings are stored as the program is terminated. If the
COM port is not available upon the next start of the pro-
gram (e.g. because the converter has not been plugged in)
another valid interface is set.
If you use the Camille Bauer USB-RS485 converter
(Article Number 163189), the same is to be connected as
follows:
POWER
RS485
T 1B1
HALF
A1 T 2
Rx
USB / RS485
CONVERTER
Tx
T1
T2
USB
GND
A1
B1

Specyfikacje produktu

Marka: Camille Bauer
Kategoria: odbiornik
Model: Sineax V604s

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Camille Bauer Sineax V604s, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje odbiornik Camille Bauer

Camille Bauer

Camille Bauer Sineax TV804 Instrukcja

1 Października 2024
Camille Bauer

Camille Bauer Sineax TV809 Instrukcja

1 Października 2024
Camille Bauer

Camille Bauer Sineax VS50 Instrukcja

1 Października 2024
Camille Bauer

Camille Bauer Sineax TV819 Instrukcja

1 Października 2024
Camille Bauer

Camille Bauer Sineax VS54 Instrukcja

1 Października 2024
Camille Bauer

Camille Bauer Sineax VS52 Instrukcja

1 Października 2024
Camille Bauer

Camille Bauer Sineax V604s Instrukcja

1 Października 2024
Camille Bauer

Camille Bauer Sineax TVD825 Instrukcja

1 Października 2024
Camille Bauer

Camille Bauer Sineax TV815 Instrukcja

1 Października 2024

Instrukcje odbiornik

Najnowsze instrukcje dla odbiornik

Elipson

Elipson P1 Instrukcja

14 Marca 2025
Elipson

Elipson Stream S300 Xi Instrukcja

14 Marca 2025
Elipson

Elipson WIIM Mini Instrukcja

14 Marca 2025
KanexPro

KanexPro SP-1X16SL18G Instrukcja

13 Marca 2025
Marshall Electronics

Marshall Electronics VDA-108-3GS Instrukcja

13 Marca 2025
Rega

Rega Brio MK7 Instrukcja

12 Marca 2025
Rexing

Rexing RoadMate CPStream Instrukcja

12 Marca 2025
Mtx Audio

Mtx Audio Thunder TH2500.1 Instrukcja

11 Marca 2025
Mtx Audio

Mtx Audio Thunder TH1500.1 Instrukcja

11 Marca 2025
Mtx Audio

Mtx Audio Thunder TH750.1 Instrukcja

11 Marca 2025